• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.753-758
• /
• 2003

The purpose of the present study was to establish the mechanism of the generation of atherosclerosis by analyzing the hemodynamic variables in the coronary artery where atherosclerosis occurs frequently. From the previous results, the stenosis phenomena due to atherosclerosis were related to not only biochemical reaction between blood and blood vessel but also the hemodynamic factors like flow separation and oscillatory wall shear stress. The present study aimed to investigate the causes of the generation and progression of atherosclerosis in the coronary artery. This study also aimed to develop the softwares which generate automatically three dimensional vascular models obtained by the angiogram images and the computer vision techniques. In the present study, the flow patterns for full three-dimensional hemodynamic characteristics were analyzed. To understand the three-dimensional hemodynamic characteristics, the wall shear stress distributions and secondary flows were investigated quantitatively.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.716-724
• /
• 1990

본 연구에서는 2차원 경사충돌분류에 대한 실험을 수행하였고, 이 결과를 수] 치해석에 의한 계산치와 비교하였다. 실험에서는 난류특성을 구명하기 위하여 열선 풍속계를 사용해 충돌각의 변화에 따른 평균속도, 각 난류응력성분, 압력등을 측정하 였다.수치해석을 위한 난류모델로는 표준 K-.epsilon.모델을 사용하였다.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.629-639
• /
• 2002

In-vitro flow characteristics downstream of a polyurethane artificial heart valve and a Bjork-Shiley Monostrut mechanical valve have been comparatively investigated in pulsatile flow using particle image velocimetry (PIV). With a triggering system and a time-delayed circuit the velocity distributions on the two perpendicular measurement planes downstream of the valves are evaluated at any given instant in conjunction with the opening behaviors of valve leaflets during a cardiac cycle. The regions of stasis and high shear stress can be found simultaneously by examining the entire view of the instantaneous velocity and Reynolds shear stress fields. It is known that high shear stress regions exist at the interface between strong axial jet flows along the wall and vortical flows in the central area distal to the valves. In addition. there are large stagnation or recirculation regions in the vicinity of the valve leaflet, where thrombus formation can be induced by accumulation of blood elements damaged in the high shear stress zones. A correlation between the unsteady flow patterns downstream of the valve and the corresponding opening postures of the polyurethane valve membrane gives useful data necessary for improved design of the frame structure and leaflet geometry of the polyurethane valve.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2558-2562
• /
• 2007

In the present work, flow characteristics analysis has been performed for steam turbine bypass control valve (single-path type). The numerical analysis is performed by solving three-dimensional Reynolds-averaged Navier-Stokes (RANS) equations. Shear stress transport (SST) model is used as turbulence closure. Symmetry condition is applied at the mid plane of the valve while adiabatic condition is used at the outer wall of the cage. Grid independency test is performed to find the optimal number of grid points. The pressure and temperature distributions on the outer wall of the cage are analyzed. Mass flow rate at maximum plug opening condition is compared with the designed mass flow rate.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.96-101
• /
• 2016

A two-dimensional Stokes flow past a circular disk in a circular tube is analyzed. The circular disk is located coaxially with the circular tube and the Hagen-Poiseuille flow exists at upstream and downstream far from the circular disk. The Stokes approximation is used and the flow is investigated analytically by using the method of eigenfunction expansion and the method of least square. From the analysis, the stream function and the pressure of the flow field are obtained, and the streamlines and pressure distribution are shown. Also, the pressure and shear stress distributions on the circular disk and circular tube wall are calculated, and shown for some typical radii of the circular disk. The additional pressure drop induced by the disk and the drag force exerted on the disk are compared as functions of the radius of the circular disk, and it is shown that the shear force on the wall of the tube increases due to the disk.

• Ecology and Resilient Infrastructure
• /
• 제4권4호
• /
• pp.207-215
• /
• 2017

하도의 흐름 저항, 측벽 보정, 유사량, 하도 침식과 퇴적, 하도 설계 등의 수리학적 문제는 하상전단응력의 분포와 밀접한 관계가 있으나 하상전단응력 분포를 측정하는 것은 쉽지 않다. 본 연구에서는 간편하게 하상전단응력을 측정할 수 있는 프레스톤튜브를 이용하여 복단면의 하도의 하상전단응력 분포를 측정하고 수심비에 따른 전단응력분포 특성을 고찰하였다. 이를 위해 프레스톤튜브를 제작하여 검정실험을 통해 검정식을 개발하였다. 실험은 5가지 수심비 조건에 대해서 수행하여 전단응력분포를 측정하였다. 복단면 하도의 전단응력분포 특성은 기존 실험연구와 대체로 일치하였으며, 레이놀즈수 증가로 발생하는 전단응력의 변동성, 주수로 전단응력의 변곡점 형성, 홍수터 접합부 부근 전단응력 분포 특성 등에서 차이점을 확인하였다. 본 연구를 통해 프레스톤튜브를 이용한 하상전단응력측정 적용성을 확인하였으며 레이놀즈수와 수심비에 따른 복단면 하도의 전단응력분포 특성을 제시하였다.

• 대한토목학회논문집
• /
• 제42권6호
• /
• pp.775-786
• /
• 2022

원자력발전소 구조물을 포함하여 플랜트 구조물에서는 사용 중 설비보강을 위하여 벽체 및 슬래브에 관통부를 신설하는 경우가 빈번히 발생하고 있으며, 관통부 설치작업 중에 철근이 절단되는 사례가 일부 발생하고 있다. 이 관통부들은 설계 또는 건설 단계에서 고려된 것이 아니므로 설치 중 발생한 철근의 절단은 사실상 구조물의 손상이기 때문에, 관통부 주변 응력 전이범위 또는 유효폭을 고려한 구조물의 건전성 평가가 필요하다. 본 연구에서는 가동중인 원자력발전소 벽식 건물의 전단벽에 관통부를 신설할 경우에 발생하는 철근 절단의 영향을 평가하기 위하여 다양한 비선형 해석과 정적 가력 실험을 수행하였다. 그리고 관통부 신설과 철근의 절단으로 인한 벽체의 강성저하와 관통부 주변 철근의 응력 및 변형률 분포를 평가하였다.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.161-165
• /
• 2004

철근콘크리트조 공사의 안전성과 효율성은 동바리-슬래브거푸집의 최적의 운영에 달려있다. 철근콘크리트공사에서의 사고는 주로 가설공사에 과도한 하중이 작용하였거나 동바리를 조기에 철거하기 때문에 발생한다. 콘크리트의 조기압축강도발현이 공사중구조체의 안전에 중요하다. 슬래브-동바리의 상호작용에 관한 연구는 주로 무량슬래브 구조에 대하여 이루어 졌다. 본 연구에서는 전단벽식 철근콘크리트조 아파트에서 슬래브와 동바리에서의 하중분포를 유한요소법을 이용하여 조사하였다.

• 설비공학논문집
• /
• 제14권3호
• /
• pp.254-260
• /
• 2002

There have been many studies for the flow through internally finned tube, since the heat exchangers with fin device derive much attention in heat transfer enhance cent. In this study, analysis of laminar flow through the circular tube with longitudinal fins are investigated. The height and the number of fins are arbitrary. The flow field is assumed to be laminar and conformal mapping is used to obtain analytic solution. From the analytic solution, equi-velocity lines are shown, and the flow rate through the finned tube is calculated for various fin heights and numbers of fins. Darcy friction factor for this finned tube and shear stress distributions on the wall and fin are also considered.

• Advances in aircraft and spacecraft science
• /
• 제2권2호
• /
• pp.183-198
• /
• 2015

Scramjets are a class of hypersonic airbreathing engine that are associated with realizing the technology required for economical, reliable access-to-space and high-speed atmospheric transport. After-burning augments the thrust produced by the scramjet nozzle and creates a more robust nozzle design. This paper presents a numerical study of three parameters and the effect that they have on thrust augmentation. These parameters include the injection pressure, injection angle and streamwise injection position. It is shown that significant levels of thrust augmentation are produced based upon contributions from increased pressure, mass flow and energy in the nozzle. Further understanding of the phenomenon by which thrust augmentation is being produced is provided in the form of a force contribution breakdown, analysis of the nozzle flowfields and finally the analysis of the surface pressure and shear stress distributions acting upon the nozzle wall.