• International Journal of Naval Architecture and Ocean Engineering
• /
• 제1권1호
• /
• pp.29-38
• /
• 2009

A ship's screw-propeller produces thrust by rotation and, at the same time, generates rotational flow behind the propeller. This rotational flow has no contribution to the generation of thrust, but instead produces energy loss. By recovering part of the lost energy in the rotational flow, therefore, it is possible to improve the propulsion efficiency. The contra-rotating propeller (CRP) system is the representing example of such devices. Unfortunately, however, neither a design method nor a full-scale performance prediction procedure for the CRP system has been well established yet. The authors have long performed studies on the CRP system, and some of the results from the authors' studies shall be presented and discussed.

• 대한조선학회논문집
• /
• 제36권4호
• /
• pp.21-27
• /
• 1999

본 논문에서는 교란 포텐셜을 기저로 하는 패널방법을 사용하여 물제트를 분사하는 플랩을 가진 타의 성능해석을 수행하였다. 받음각이 큰 경우, 성능해석의 주요 인자가 되는 후류면의 위치를 구하기 위하여 후류면의 roll-up을 포함시킨 Pyo[1]의 방법을 사용하여 계산하였고, 경계면은 쌍곡면 패널로 이산화하였다. 플랩타의 본체와 플랩 사이의 간극유동을 점성유동인 Couette유동으로 가정하여 계산하였고, 간극 사이에서 분사되는 물제트는 유량변화를 소스로, 모멘텀변화를 떨어져 나가는 보오텍스로 가정하여, 간극의 입구와 출구 패널 위에서 경계조건으로 포함시켜 계산하였다. 본 방법의 수치적 검증을 위해 실험값이 존재하는 경우에 대해 실험값과 프로그램의 수치결과를 비교하였다. 비교 결과, 실험값은 계산값과 좋은 일치를 보임을 확인하였다.

• 항공우주시스템공학회지
• /
• 제16권6호
• /
• pp.114-122
• /
• 2022

본 논문에서는 CFD 기법을 활용하여 전기체 형상의 투척식 무인기 형상에 대해 고속 회전하는 프로펠러와 그로 인해 생성된 후류 간섭 효과를 고려한 비정상 유동해석을 수행하였다. 또한 다양한 투척식 이륙 조건에서 롤 모멘트 평형에 요구되는 에일러론 타각을 정확하게 예측하기 위해 실제 조종면 회전을 고려한 유동해석이 수행되었다. 투척식 소형 무인기의 경우 초기 이륙상태에서 롤 안정성을 증대시키기 위해 적절한 초기 에일러론 설정을 활용하는 것이 유용한 방식이며, 구축된 공력 데이터베이스를 사용하여 다양한 이륙속도와 받음각 조건들에 대해 롤 모멘트를 상쇄시킬 수 있는 에일러론 타각 조건들이 빠르게 예측 가능함을 보였다.

• Wind and Structures
• /
• 제10권6호
• /
• pp.511-532
• /
• 2007

The present study aims to generate turbulent inflow data to more accurately represent the turbulent flow around a square cylinder when the inflow turbulence level is significant. The modified random flow generation (RFG) technique in conjunction with a previously developed LES code is successfully adopted into a finite element based fluid flow solver to generate the required inflow turbulence boundary conditions for the three-dimensional (3-D) LES computations of transitional turbulent flow around a square cylinder at Reynolds number of 22,000. The near wall region is modelled without using wall approximate conditions and a wall damping coefficient is introduced into the calculation of sub-grid length scale in the boundary layer of the cylinder wall. The numerical results obtained from simulations are compared with each other and with the experimental data for different inflow turbulence boundary conditions in order to discuss the issues such as the synthetic inflow turbulence effects on the 3-D transitional flow behaviour in the near wake and the free shear layer, the basic mechanism by which stream turbulence interacts with the mean flow over the cylinder body and the prediction of integral flow parameters. The comparison among the LES results with and without inflow turbulence and the experimental data emphasizes that the turbulent inflow data generated by the present RFG technique for the LES computation can be a viable approach in accurately predicting the effects of inflow turbulence on the near wake turbulent flow characteristics around a bluff body.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.337-346
• /
• 2002

Wind tunnel pressure measurements and numerical simulations based on the Reynolds Stress Model (RSM) are compared with full and model scale data in the flow area of impingement, separation and wake for $60^{\circ}$ and $90^{\circ}$ wind azimuth angles. The phase averaged fluctuating pressures simulated by the RSM model are combined with modelling of the small scale, random pressure field to produce the total, instantaneous pressures. Time averaged, rsm and peak pressure coefficients are consequently calculated. This numerical approach predicts slightly better the pressure field on the roof of the TTU (Texas Tech University) building when compared to the wind tunnel experimental results. However, it shows a deviation from both experimental data sets in the impingement and wake regions. The limitations of the RSM model in resolving the intermittent flow field associated with the corner vortex formation are discussed. Also, correlations between the largest roof suctions and the corner vortex "switching phenomena" are observed. It is inferred that the intermittency and short duration of this vortex switching might be related to both the wind tunnel and numerical simulation under-prediction of the peak roof suctions for oblique wind directions.

• 한국전산유체공학회지
• /
• 제17권3호
• /
• pp.53-58
• /
• 2012

Steady flow simulations through a high pressure turbine guide vanes were carried out. The main objective of the present work is to study the performance of turbulence models on the steady flow prediction from aerodynamic and aerothermal points of view. Three turbulence models were compared, namely SST, k-${\omega}$ and ${\omega}$-Reynolds stress models. The laminar results were also compared. The comparison was done with emphasis on the isentropic Mach number and heat transfer coefficient along the blade, and total pressure loss in the wake region. The calculated isentropic Mach number showed reasonable agreement with experimental data along the blade surface for all three turbulent models. For the total pressure loss in the wake region, ${\omega}$-Reynolds stress model showed the best agreement with the experimental data. However, unless using an appropriate transition model, the heat transfer coefficients of all three turbulent models showed poor agreement with experimental data.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.40.2-40.2
• /
• 2011

A Counter-rotating wind turbine is one of the new concepts that are proposed to increase the performance of a wind turbine. It has two rotors rotating in the same axis, and it is known that its power coefficient can reach to 0.64 in the ideal case. While the BEMT is widely used to analyze the aerodynamic performance of wind turbines, the analysis of the counter-rotating wind turbine by using it is limited due to the aerodynamic interaction between the two rotors. In this study, the vortex lattice method is used to consider the effect of the front rotor on the rear rotor of the counter-rotating wind turbine and calculate the aerodynamic performance of it. The power and thrust sharing in the two rotors of the counter-rotating wind turbine are predicted and the total power and thrust are compared with that of a single rotor. Moreover, the wake convection and expansion rate is also compared with that of a single rotor.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권2호
• /
• pp.112-118
• /
• 2010

The numerical study about the vortex-induced vibration and vortex shedding in the wake has been presented. Prior to the numerical simulation of flexible riser systems concerning engineering conditions, efficiency validating of the proposed FSI solution method have been performed. The comparison between numerical simulation and published experimental data shows that the CFD method designed for FSI solution could give acceptable result for the VIV prediction of flexible riser/pipe system. As meaningful study on VIV and vortex shedding mode with the focus on flexible riser model systems, two kinds of typical simulation cases have been carried out. One was related to the simulation of vortex visualization in the wake for a riser model subject to forced oscillation, and another was related to the simulation of fluid-structure interaction between the pipes of coupled multi-assembled riser system. The result from forced oscillation simulation shows that the vortex-induced vibration with high response frequency but small instantaneous vibration amplitude contributes to vortex conformation as much as the forced oscillation with large normalized amplitude does, when the frequency of forced oscillation was relatively high. In the multi-assembled riser systems, it has been found that the external current velocity and the distance between two pipes are the critical factors to determine the vibration state and the steady vibration state emerging in quad-pipe system may be destroyed more easily than dual-pipe system.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.8-15
• /
• 2014

In this study, flow characteristics around the hull form of KLNG are investigated by numerical simulations. The numerical simulations of the turbulent flows with the free surface around KLNG have been carried out at Froude number 0.1964 using the FLUENT 6.3 solver with Reynolds stress turbulence model. Several GEOSIM models are adopted to consider the scale effect attendant on Reynolds number. Furthermore, a full scale ship is calculated and the result is compared with the numerical results of GEOSIM models. The calculated results of GEOSIM models and the full scale ship are compared with the experiment data of MOERI towing tank test and Inha university towing tank test. Moreover, wake distribution on the propeller plane of the full scale ship is estimated using the numerical results of GEOSIM models. The prediction result is directly compared with the simulation result in full scale.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.768-773
• /
• 2011

The prediction method of future events using the time histories of velocity or pressure, etc., is a useful way for controlling various air vehicles. For example, the sensors of velocity or pressure can be used to extract the time mode coefficients of eigenmode of flow field, and then the result is applied to suppress wake or drag. The velocity information is mapped to the entire flow field, so this mapping function can be used to predict the future events based on the current information. The mapping function is composed of the huge amount of weight parameters, so the efficient way of finding these parameters is needed. Here, the neural network algorithm is studied to draw a mapping function using the number and location of velocity sensors.