• 제목/요약/키워드: waist pulling

검색결과 7건 처리시간 0.024초

자세 균형 제어 시 동요의 강도와 관절 반발력의 상관관계 (Correlation between sway magnitude and joint reaction force during postural balance control)

  • 서민좌;조원학;최현기
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.1160-1165
    • /
    • 2004
  • The purpose of this study was to calculate three dimensional angular displacements, moments and joint reaction forces of the ankle joint during the waist pulling, and to assess the ankle joint reaction forces according to different perturbation modes and different levels of perturbation magnitude. Ankle joint model was assumed 3-D ball and socket joint which is capable of three rotational movements. We used 6 cameras, force plate and waist pulling system. Two different waist pulling systems were adopted for forward sway with three magnitudes each. From motion data and ground reaction forces, we could calculate 3-D angular displacements, moments and joint reaction forces during the recovery of postural balance control. From the experiment using falling mass perturbation, joint moments were larger than those from the experiment using air cylinder pulling system with milder perturbation. However, JRF were similar nevertheless the difference in joint moment. From this finding, we could conjecture that the human body employs different strategies to protect joints by decreasing joint reaction forces, like using the joint movement of flexion or extension or compensating joint reaction force with surrounding soft tissues. Therefore, biomechanical analysis of human ankle joint presented in this study is considered useful for understanding balance control and ankle injury mechanism.

  • PDF

전방향 동요 시 압력중심의 기구학적 특성을 통한 하이힐 착용 여성의 자세균형회복 메커니즘에 관한 고찰 (The investigation of postural balance recovery mechanism of high-heeled women using COP's kinematic characteristics during the waist pulling)

  • 조원학;서민좌;최현기
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.1211-1214
    • /
    • 2004
  • High-heeled women have been identified with balance control problems. The purposes of this study were to objectively quantify the displacements and velocities of center-of-pressure (COP) of body during waist pulling and to compare the differences between barefooted and high-heeled situations. We used a waist pulling system which has three different magnitudes to sway the subjects. We found that the kinematic information of barefooted and high-heeled women's COP is very important in understanding the mechanism of postural balance control of women in every-day life. In the high-heeled's case, the displacement of COP increases in 200% as against bare footed. Also the velocity variation of COP grows three times than the bare footed. COP analysis in postural balance study of high-heeled women is also considered useful in development of the safety systems that prevent high-heeled women from falling

  • PDF

성인여성의 의복 원형 개발에 관한 연구 -성인여성의 체형 분류에 관한 연구의 후속 연구- (The Study of Classification Body Types of Adults Women and Drawing of Prototype of Clothing)

  • 손혜순;손혜정
    • 복식문화연구
    • /
    • 제5권4호
    • /
    • pp.130-158
    • /
    • 1997
  • This study outputs calculation of regression of each items for production of torso basic pattern according to 6 body types as the result of another study and intends to present drawing method of torso model by short measure method modified and supplied and supplied by experiments of wearing clothing. SAS(Statistical Analysis System) is used for figures management and methods for analysis used are Frequency Analysis, Means Analysis, Regression Analysis, Correlation Analysis, etc. Results are as follows. 1. Correlation analysis is used to output the size necessary for torso prototype drawing by sort measure method and waist front length, back length, crotch length, shoulder point-cerricale-shoulder point, bust circumference, waist circumference, weight, etc, are set up as representative items calculation of regression of each type is suggested. 2. In the result of experiment of the first wearing clothing intended for 5 in each type and the whole 30, to develop torso prototype drawing method by short measure method, as we find some problems of the shape and propriety of neck root circumference line, the position of shoulder point, pulling or hold armpit parts, waist circumference line, the degree of dissatisfaction is high, so the second experiment of wearing clothing is propriety of each part is improved, all items except the length and quantity of shoulder dart, waist in back bodice, clearance quantity of hip circumference, and the place of shoulder line in side bodice. So, it was modifed and supplied and then the third torso prototyped drawing method by shout measure method was suggested. The third prototype drawing method was suggested, by modifying and supplying.

  • PDF

슬랙스 패턴의 허리뒤점 설계에 따른 외관 및 동작적합성 평가 (Evaluation of Appearance and Optimal for Motion According to the Back Waist Point of Slacks Pattern)

  • 권숙희;홍지운
    • 한국의류학회지
    • /
    • 제37권6호
    • /
    • pp.750-763
    • /
    • 2013
  • This research suggests pattern design methods for motion through an evaluation of the appearance and motion of three existing kinds of original patterns (K type, N type, and L type) and modified patterns designed by the researcher. The results of the study are as follows. First, the evaluation of appearances showed that the modified patterns of a standing posture received a higher evaluation compared to the original patterns only in N type and in a sitting posture. In addition, the degree of lowering or a natural feel by the pulling of the slacks waist belt in a sitting posture received a higher evaluation than the original patterns. Second, the evaluation of motions showed that modified patterns received a higher evaluation than the original patterns in almost all items. Per each pattern, it showed meaningful differences in questions asking about the degree of comfort as the whole in N type in crouching motions. The L type showed low scores as a whole (both in original patterns and modified patterns) and the K type showed meaningful differences in questions asking about the degree of comfort of the crista iliaca and groin region in the motion of walking at a normal walking pace, ascending stairs and bending the waist 90 degree to the front. Third, the measuring distance the between back waist point of the body and the back waist point of original patterns and modified patterns during motions showed that the modified patterns of all three patterns (N type, L type, and K type) showed less lowering compared to the original forms in the whole pattern as well as individual patterns. The design method of back waist point developed in this research can be regarded as a design method appropriate for motions.

3차원 가상착의를 활용한 방호복 평가 (Evaluation of Protective Clothing Using 3D Virtual Fitting)

  • 이옥경;이희란
    • 한국염색가공학회지
    • /
    • 제35권2호
    • /
    • pp.107-120
    • /
    • 2023
  • The purpose of this study was to analyze the patterns of D level protective clothing, improve their ease of movement by modifying the patterns, and validate the effectiveness of the improvements through 3D virtual fitting and subjective wearing evaluations. Based on previous studies that identified numerous complaints, the patterns of the neck, armpit, and waist areas were modified, resulting in the development of new patterns. To compare and analyze the improved protective clothing with the basic protective clothing, stress and strain were examined after 3D virtual fitting. Additionally, to assess the clothing's allowance, the overall distance between the avatar and the protective clothing, as well as the sectional circumference length and distance of each avatar body part, were measured. Furthermore, the improved protective clothing was manufactured, and a subjective wearing evaluation was conducted with ten males in their twenties as participants. The results showed that the improved protective clothing had evenly distributed stress, larger sectional circumference, and lower average cavity distance. The subjective wearing evaluation also revealed that the suit with improved patterns exhibited superior size suitability, reduced pulling sensation in different body parts, and increased ease of movement. In conclusion, this study confirmed that even minimal pattern modifications can enhance the functionality of protective clothing, alleviating discomfort for wearers.

기능성 농촌작업복 개발을 위한 예비연구 (A Pilot Study for the Development of Functional Rural Workwear)

  • 나승정;차수정
    • 패션비즈니스
    • /
    • 제28권1호
    • /
    • pp.113-130
    • /
    • 2024
  • A questionnaire survey of farmers engaged in actual farming was conducted to investigate the farmers' actual wearing conditions and preferences for agricultural workwear to develop workwear that is suitable for improved agricultural work efficiency. We extracted basic data necessary for the development of agricultural workwear. Analysis of the photographs taken showed differences in the shoes and gloves worn depending on the type of work. The percentages of men and women were equal among the agricultural workers. The age of the agricultural workers was analyzed and the results showed a higher percentage of those over 50 years old, indicating that the age of the agricultural workers was higher than in other industries. It was found that the waist, knees, and elbows of the workers were pulled during work, and analysis showed that the symptoms resulting from clothing pulling were more severe when the wearing dimensions were larger. It was recognized that the important aspects of workwear are those related to work, such as functionality, activity, and work efficiency. In addition to workwear, the most commonly worn auxiliary equipment was gloves, and other items included hats, armbands, work shoes, boots, seat chairs, and masks. When developing rural workwear, it is necessary to consider the fit, type of work, and materials of the workwear. Future research should focus on materials that can improve the functionality of workwear and pattern development that reflects physical and movement characteristics.

동북(東北)아시아 유의 기원(起源)과 그 교류(交流)에 관(關)한 연구(硏究) -$4{\sim}8$세기(世紀)를 중심(中心)으로- (A study on the origination and Transmission of Yu in Northeast Asia. -from the 4th Century to the 8th Century-)

  • 박경자;조선희
    • 복식
    • /
    • 제17권
    • /
    • pp.29-43
    • /
    • 1991
  • Yu was a type of dress worn on the upper part of the body which was commonly used in Northeast Asia. It was originally used by the Northern race for the need of courtesy as well as protecting cold. It was believed that Yu in Northeast Asia, which was called Kaftan, was came from Scythai lived in North Eurasian land around the Black sea. Scythians were the first-formed horse-riding race in the world and their civilization influenced those of far Asiatic sector along the steppe route. As their power expanded, their costume culture transmitted to the East(China, Korea, Japan). The upper garment, Yu, was characterized by the left-sided collars, narrow sleeves belted at the waist to the length of the hip line and the tight trouser on the lower part, which we commonly called HoBok(胡服) style. 1. Yu in Northeast Asia was originated from the Eurasians, Scythian Culture. Being exchanged, active style costumes were widely used among Chinese, Koreans and Japanese throughout centuries' including $4{\sim}8$ century. 2. Chinese Yu had a style of wide-sleeves and right-sided collars. The traditional costumes of Han race are consisted of wide-sleeved Yu on the upper and long-skirt on the lower part of the body. Before the adoptation of HoBok during reign of King Jo Mooryung in 307. B.C., HoBok style had already found in the remains since the Sang period. There were various names among Yu during the Han period. Seup, Sean Eui, Kye, Kyu were one of the styles and several names were meant for collar and sleeves. During $4{\sim}8$ centuries, clothes of right-sided collar were found, superior to that of left-sided and narrow sleeves were widely used both the royal and the humble. Various styles of decoration were seen in Yu around neck, back and sleeves comparing other nations. 3. Yu, in Korea, was typical style of Northern-bound HoBok. Both men and women had similarity in Yu style, narrow sleeves, left-sided collar, belted at the waist and to the length of hip line. Influenced by Han race, in the $4th{\sim}8th$ centuries, dual system of collar was found. But we cannot see major change in Yu and finally was connected to the present. 4. The original design of the Japanese costumes was not similar to that of Northern nomadic hunting race, which was suitable for horse-riding activities. Owing to the climates along the island, we could see various conditions ranging from the cold and to the warm. Influenced by the climates, pulling over the neck(Pancho style) were major design in Japan. As Korea was advanced earlier than Japan, Korean landed Japanese territory showing clothes. So primitive costumes had changes in style. During the $4th{\sim}8th$ period. The Korean mode was found in Haniwa (which was built to make sacrifices to the dead King) and costumes in Jeong Chang Won. Among the costumes in Jeong Chang Won, we put 3 or more costumes to the category of Yu characterizing elements of Korea and Tang period. From the $4th{\sim}8th$ century, China, Korea, Japan fell into the same cultural category, Scythai. Styles in Yu among three nations, we saw little differences, basically along times. Originated from the West Asia, Yu was transmitted to the far East changing Chinese costumes, Koreans melted it into the traditional elements and then influenced Japan.

  • PDF