• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.545-546
• /
• 2008

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.30-31
• /
• 2016

Recently in the construction site is required various performance of mortar to deal with reliability, economy. Especially of environment-friendly, saving resources and high performance of mortar it began to require improvement of performance. Therefore, in this study, a series of tests was designed to develop a using mud flat mortar in view of the high absorption rate of tidal flats, to fix the water cement ratio to 70%. The mixing ratio were 10:0, 9:1, 8:2, 7:3, 6:4, 5:5, 4:6 of fine aggregate and mud flats. Compared the flow value, chloride content, compressive strength, tensile strength, and workability of fine aggregate the substituted mud flat mortar and basic cement mortar, present the basic data on the characteristics and effects of mud flat mortar.

• Journal of Environmental Science International
• /
• v.15 no.3
• /
• pp.243-252
• /
• 2006

The emergy concept was used to valuate the contributions of a tidal flat ecosystem included in the fourth stage reclamation plan for the Youngsan River area to the Korean economy. Emergy contributions of the ecosystem were compared with those of economic valuations performed on the same ecosystem. The tidal flat ecosystem contributed 3.55 million EmW/ha annually. This, however, cannot be compared directly with those of the economic valuations because both methodologies approach the valuation of ecosystems in different perspectives. The emergy methodology is a donor-based valuation in which what goes into making a product or service is measured, while the economic valuation is a receiver-based approach in which human receivers determine the value of an ecosystem product or service. An emergy valuation was conducted for the three ecosystem functions included in the economic valuations to compare the results of both methodologies on the same basis. Fishery production and pollutants removal contributed 9.86 million EmW/ha/yr and 0.88 million EmW/ha/yr, respective1y. The conservation value of the tidal flat ecosystem was 3.55 million EmW/ha/yr. Overall, the emergy valuation that try to include works of both human and nature on the same basis resulted in higher economic contribution of the tidal flat ecosystem than that calculated by the economic methodologies in which only human works are measured based on the willingness-to-pay of people. This study showed that the emergy concept could provide an alternative tool for policy decision-making regarding utilization and conservation of ecosystems by approaching the ecosystem valuation from a different perspective than that of economic methodologies.

• Journal of the Korean Mathematical Society
• /
• v.53 no.3
• /
• pp.623-643
• /
• 2016

In this paper, we study piecewise Noetherian (resp., piecewise w-Noetherian) properties in several settings including flat (resp., t-flat) overrings, Nagata rings, integral domains of finite character (resp., w-finite character), pullbacks of a certain type, polynomial rings, and D + XK[X] constructions.

• Bulletin of the Korean Mathematical Society
• /
• v.55 no.1
• /
• pp.227-237
• /
• 2018

In this paper, we study some geometric structures of a weakly cyclic Z-symmetric manifold (briefly, $[W CZS]_n$). More precisely, we prove that a conformally flat $[W CZS]_n$ satisfying certain conditions is special conformally flat and hence the manifold can be isometrically immersed in an Euclidean manifold $E^n+1$ as a hypersurface if the manifold is simply connected. Also we show that there exists a $[W CZS]_4$ with one parameter family of its associated 1-forms.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.863-864
• /
• 2010

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2007.11a
• /
• pp.193-198
• /
• 2007

KIER has been developing the anode supported flat tubular SOFC stack for the intermediate temperature $(700{\sim}800^{\circ}C)$ operation. for this purpose, we have first fabricated anode supported flat tubular cells by the optimization between the current collecting method and the induction brazing process. After that we designed the compact fuel & air manifold by adopting the simulation technique to uniformly supply fuel & air gas and the unique seal & insulation method to make the more compact stack. For making stack, the prepared anode-supported flat tubular cells with effective electrode area of $90cm^2$ of connected in series with 12 modules, in which one module consists of two cells connected in parallel. The performance of stack in 3 % humidified $H_2$ and air at $800^{\circ}C$ shows maximum power of 507 W. Through these experiments, we obtained basic & advanced technology of the anode-supported flat tubular cell and established the proprietary concept of the anode-supported flat tubular SOFC stack in KIER.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.2
• /
• pp.142-150
• /
• 2016

This paper developed new manufacture process technology of slim type flexible flat lighting product used lower power white LED. Flexible flat lighting is applied to letter sign lighting, traffic lighting, interior wall lighting, flat lighting, aquarium back lighting, wreath light etc. Main manufacture process technology were developed drawing software for electronics circuit, inkjet electronic circuit pattern and inkjet white ink coating. For pattern printing it was utilized for piezoelectonic inkjet head printing technology. Also high vacuum pressure laminating technology was waterproofing for LED flat lighting protection. Hence, form process technology we were manufactured for flexible flat lighting product of the power 12 W, input voltage 48 V and plane size $480{\times}480mm$. It acquired a these validity from experiment results.

• KSBB Journal
• /
• v.29 no.4
• /
• pp.225-231
• /
• 2014

A microbial fuel cell (MFC) and bioelectrochemical systems are novel bioprocesses which employ exoelectrogenic biofilm on electrode as a biocatalyst for electricity generation and various useful chemical production. Previous reports show that electrogenic biofilms of MFCs are time varying systems and dynamically interactive with the electrically conductive media (carbon paper as terminal electron acceptor). It has been reported that maximum power point tracking (MPPT) method can automatically control load by algorithm so that increase power generation and columbic efficiency. In this study, we developed logic based control strategy for external load resistance by using $LabVIEW^{TM}$ which increases the power production with using flat-plate MFCs and MPPT circuit board. The flat-plate MFCs inoculated with anaerobic digester sludge were stabilized with fixed external resistance from $1000{\Omega}$ to $100{\Omega}$. Automatic load control with MPPT started load from $52{\Omega}$ during 120 hours of operation. MPPT control strategy increased approximately 2.7 times of power production and power density (1.95 mW and $13.02mW/m^3$) compared to the initial values before application of MPPT (0.72 mW and $4.79mW/m^3$).

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.606-613
• /
• 2019

In this paper, a new method for flat sweeping automatic hold of wavelength swept laser has proposed. Through the performance test on the implemented laser, even 5 hours passed, the flat sweeping has held up well, and 56nm flat sweeping range, 1kHz sweeping frequency, and 8.8mW average optical power were obtained. This showes that the proposed can eliminate the necessity of hand-operated polarization control required for previous swept lasers in case of long time operation and also optical spectrum analyzer needed to monitor the sweeping spectrum status.