• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.318-321
• /
• 2000

We showed that the change of Ar to $N_2$flow during the TiN deposition by the reactive sputtering decides the crystallinity of LPCVD W, as well as the electrical properties of the W-TiN/SiO$_2$Si capacitor. In particular, the threshold voltage can be controlled by the Ar to $N_2$ratio. As compared to the results obtained from the LPCVD W/SiO$_2$/Si MOS capacitor, the insertion of approximately 50 nm TiN film effectively prohibits the fluorine diffusion during the deposition and annealing of W films, resulting in negligible leakage currents at the low electric fields.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.963-966
• /
• 2001

The wideband DS-CDMA (W-CDMA) system is one of the candidates for the next generation mobile communication system known as IMT-2000. The important concept of W-CDMA is the introduction of intercell asynchronous operation. In this paper, we design and analyze the system level simulator for the International Mobile Tele communication - 2000 (IMT-2000) 3-rd generation partnership project (3GPP) system. We confirm how the simulator works by BER over different Eb/NO. This study will be expected to use as reference data in the development of asynchronous IMT-2000. In this paper, we analyze a physical layer of W-CDMA system and design a transmitter and receiver by using ADS (Advanced Design System). Also, we simulated a link level performance in Rayleigh fading channel environment. This study will be useful in the analysis and design of W-CDMA system.

• Design & Manufacturing
• /
• v.6 no.1
• /
• pp.58-62
• /
• 2012

Unlike conventional single special cut methods, W-EDM is a combination of multiple-effects. This study focuses on the effects of second cut on the roughness of surfaces treated with W-EDM. W-EDM is, to a large extent, typical unmanned-machining equipment, which represents NC machining equipment that allows long-time full automation. W-EMD is getting popular as a precise machining technology and STD11 is frequently used in press die manufacture. In this study, the former is applied to the latter to look at the effects of second cut on the roughness of surfaces treated with W-EDM.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.1
• /
• pp.13-16
• /
• 2001

Maltose and soluble starch were used as secondary sources of carbon for glucoamylase production by Aspergillus awamori in solid state fermentation. During batch cultivation, maltose above 2.5%(w/w) repressed glucoamylase production, but, by adding either 2.5% (w/w) maltose or 1.25% (w/w) soluble starch to fed-batch cultivations, glucoamylase activity was increased by 15% and 170% over standard medium, respectively. The data showed that maltose is a weak inducer of glucoamylase production in solid stat fermentation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.241-245
• /
• 2005

This study introduces the wind turbine (W/T) noise evaluation procedure required in the international standard (IEC 61400-11) and monitoring system for the evaluation. Noise emission characteristics of a 750kW W/T generator is investigated. Test and evaluation are performed on J48 W/T model which is under operation in Daekwanryung Wind Test Site. With the noise signal, meteorological data and W/T operational data are monitored in real time by the integrated monitoring system using LabVIEW. From the measured noise data, acoustic power level and tonality of the W/T are estimated under the wind speeds required by the international standard.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1278-1279
• /
• 2011

본 논문은 KEPCO에서 개발되어 실증이 완료된 3가지 종류의 충전기에 대해 설명한 것이다. 전기자동차용 충전기는 충전시간 및 용량에 따라 급속충전기, 완속충전스탠드, 홈충전기로 분류할 수 있으며, 설치장소 및 용도를 고려하여 설치하는 것이 바람직하다. 따라서 급속충전기는 50[kW]급의 기본형과 100[kW]급의 분리형으로, 완속충전스탠드는 7.7[kW]급의 기본형과 15.4[kW]급의 2소켓형으로, 홈충전기는 3.3 [kW]급의 단독형과 7.7[kW]급의 공동형으로 나누어 개발하도록 하였다. 본 논문에서는 이러한 충전기들을 정의하고, 구성을 설명하며, 기능 및 사양을 제시하고자 한다. 이를 통해 KEPCO에서 개발된 충전기와 충전기술 등이 국내 전기자동차 시장 활성화와 충전인프라 조기구축에 기여할 수 있음을 보이고자 한다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10c
• /
• pp.157-160
• /
• 1998

KS F 4419, which is dealt with the Inter-Locking block, states that water to cement ratio for manufacturing inter-locking block should be less than 25% and in KS F4419, the use of admixture is shown to be reluctant to recommend. In this paper, reinvestigation of some regulations in KS F 4419 are carried out. According to the experimental results, as W/C increases, flexural strength and compressive strength are tended to decrease, whereas they increases within certain range, Flexural strength and compressive strength have higher values in 1:2(W/C=35%), 1:4(W/C=45%) and 1:6(W/C=55%) of mix proportions. Moreover they have rather higher values with the containment of high range AE water-reducing agent. The absorption ratios decrease with the increase of W/C and the containment of high range AE water-reducing agent. Therefore, the regulations on the W/C and admixture in KS F 4419 reguire revision.

• Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.114-128
• /
• 2006

Recently MPEG (Moving Picture Experts Group) has started a new standardization activity called MPEG Multimedia Middleware (M3W). The M3W supports multimedia applications Independent of hardware and software such as operating systems so that the portability and interoperability of multimedia applications are greatly improved. In doing so, the M3W adopts the concept of a service-based middleware. The M3W standardizes a set of multimedia Application Programming Interfaces (APIs) and their implementations can be pro vided by third parties In the form of services. In this paper, we introduce the usage of XML metadata in describing the standard multimedia APIs and third party's services and also we explain the role of the XML Schema within the M3W in providing transparent access from application to the M3W services.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.658-666
• /
• 2003

In this paper, we analyzed standard and characteristic of portable microwave digital FPU(Field Pick Up) transmission system in AWGN channel environment as basis step of research about share way of M/W broadcasting relay frequency. And we analyzed system performance through simulator design. Domestic case, digitize progress about broadcasting relay is propeled. Therefore, we wish to utilize to basis data about interference evaluation and domestic broadcasting relay standardization for reassignment of M/W band broadcasting relay frequency.

• Journal of Korean Society for Atmospheric Environment
• /
• v.3 no.1
• /
• pp.1-12
• /
• 1987

A series of supported sulfided Ni-W/$\gamma-Al_2O_3$ and Co-W/$\gamma-Al_2O_3$ catalysts with different nickel and cobalt contents were studied in the hydrodenitrogenation of pyridine dissolved in n-heptane. The ranges of experimental conditions were at the temperatures between 453 and 753 K, and the pressures between 30 and 50 Bar. The catalytic activities with different nickel and cobalt contents were shown to be maximum at Ni/Ni+W = 0.2 - 0.3, Co/Co+W = 0.3 - 0.4. Pyridine conversion increased with pressure and temperature and the step of piperidine formation was found to be irreversible. The reaction orders in Ni-W/$\gamma-Al_2O_3$ and Co-W/$\gamma-Al_2O_3$ catalysts were the first with respect to pyridine and reaction rate constants decreased with increase of initial pyridine concentration and their activation energies were 12.98 and 9.23 kcal/mol, respectively.