한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
/
pp.133-136
/
2004
In this study, the characteristics of 3C-SiC ohmic contact were investigated. Titanium-tungsten(TiW) films were used for contact metalization. The ohmic contact resistivity between 3C-SiC and TiW was measured by HP4155 and then calculated with the circular transmission line method(C-TLM). And also the physical properties of TiW and the interface between TiW and 3C-SiC were analyzed using XRD and AES. TiW films make a good role of a diffusion barrier and their contact properties with 3C-SiC are stable at high temperature.
Let W(z) be a power series with operator coefficients such that multiplication by W(z) is contractive in C(z). The overlapping space $L(\varphi)$ of H(W) in C(z) is a Herglotz space with Herglotz function $\varphi(z)$ which satisfies $\varphi(z)+\varphi^*(z^{-1})=2[1-W^{*}(z^{-1})W(z)]$. The identity ${}_{L(\varphi)}={-}_{H(W)}$ holds for every f(z) in $L(\varphi)$ and for every vector c.
Let D be an integral domain with quotient field K,$\mathcal{I}(D)$ be the set of nonzero ideals of D, and $w$ be the star-operation on D defined by $I_w=\{x{\in}K{\mid}xJ{\subseteq}I$ for some $J{\in}\mathcal{I}(D)$ such that J is finitely generated and $J^{-1}=D\}$. The D is called a Pr$\ddot{u}$fer $v$-multiplication domain if $(II^{-1})_w=D$ for all nonzero finitely generated ideals I of D. In this paper, we show that D is a Pr$\ddot{u}$fer $v$-multiplication domain if and only if $(A{\cap}(B+C))_w=((A{\cap}B)+(A{\cap}C))_w$ for all $A,B,C{\in}\mathcal{I}(D)$, if and only if $(A(B{\cap}C))_w=(AB{\cap}AC)_w$ for all $A,B,C{\in}\mathcal{I}(D)$, if and only if $((A+B)(A{\cap}B))_w=(AB)_w$ for all $A,B{\in}\mathcal{I}(D)$, if and only if $((A+B):C)_w=((A:C)+(B:C))_w$ for all $A,B,C{\in}\mathcal{I}(D)$ with C finitely generated, if and only if $((a:b)+(b:a))_w=D$ for all nonzero $a,b{\in}D$, if and only if $(A:(B{\cap}C))_w=((A:B)+(A:C))_w$ for all $A,B,C{\in}\mathcal{I}(D)$ with B, C finitely generated.
W2C is synthesized through a reaction-sintering process from an ultrafine-W and WC powder mixture using spark plasma sintering (SPS). The effect of various parameters, such as W:WC molar ratio, sintering temperature, and sintering time, on the synthesis behavior of W2C is investigated through X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) analysis of the microstructure, and final sintered density. Further, the etching properties of a W2C specimen are analyzed. A W2C sintered specimen with a particle size of 2.0 ㎛ and a relative density over 98% could be obtained from a W-WC powder mixture with 55 mol%, after SPS at 1700℃ for 20 min under a pressure of 50 MPa. The sample etching rate is similar to that of SiC. Based on X-ray photoelectron spectroscopy (XPS) analysis, it is confirmed that fluorocarbon-based layers such as C-F and C-F2 with lower etch rates are also formed.
W-Ti-C-N based multiphase hard materials have been prepared from WC/TiN powder mixture. By sintering at and above 190$0^{\circ}C$, the two phases of powder mixture has transformed into intermixed W, W2C and Ti(C, N) phases. For the temperature range between 180$0^{\circ}C$ and 210$0^{\circ}C$, the sintered or hot pressed samples show maximum density and hardness. The seems that metallic W grains enhance the fracture toughness of materials. The wear resistance of the material is found to increase with increasing hardness.
$Al_2O_3$-SiC composites reinforced with SiC whisker ($SiC_w$) were fabricated using three different methods. In the first, $Al_2O_3-SiC_w$ starting materials were used. In the second, $Al_2O_3-SiC_w$-SiC particles ($SiC_p$) were used, which was intended to enhance the mechanical properties by $SiC_p$ reinforcement. In the third method, reaction-sintering was used with mullite-Al-C-$SiC_w$ starting materials. After hot-pressing at $1750^{\circ}C$ and 30 MPa for 1 h, the composites fabricated using $Al_2O_3-SiC_w$ and $Al_2O_3-SiC_w-SiC_p$ showed strong mechanical properties, by which the effects of reinforcement by $SiC_w$ and $SiC_p$ were confirmed. On the other hand, the mechanical properties of the composite fabricated by reaction-sintering were found to be inferior to those of the other $Al_2O_3$-SiC composites owing to its relatively lower density and the presence of ${\gamma}-Al_2O_3$ and ${\gamma}-Al_{2.67}O_4$. The greatest hardness and $K_{1C}$ were 20.37 GPa for the composite fabricated using $Al_2O_3-SiC_w$, and $4.9MPa{\cdot}m^{1/2}$ using $Al_2O_3-SiC_w-SiC_p$, respectively, which were much improved over those from the monolithic $Al_2O_3$.
Penicillium oxalicum (PENOX)은 잔디밭 토끼풀(Trifolium repens L.)의 방제를 위한 생물제제(biocontrol agent, BCA)로서의 잠재성을 보여왔다. 미생물제초균류에 의한 제초활성은 다양한 환경조건하에서 이들의 발아율, 생장력 및 기질이용성 등에 크게 영향을 받는다. 따라서 본 연구는 PENOX의 다양한 수분확성($0.94{\sim}0.995\;a_w$) 및 온도조건($18{\sim}30^{\circ}C$)하에서의 균사생장, 포자발아율 및 포자생성량을 glycerol로 조정된 MEA(malt extract agar) 배지를 사용하여 in vitro상에서 조사하였다. PENOX의 균사생장은 높은 수분활성조건($0.995\;a_w$)에서 가장 좋았으며 $30^{\circ}C$에서 가장 양호하였다. 또한 $0.995\;a_w$에서는 저온($20^{\circ}C$)에서도 균사생장이 대체로 양호하여 수분활성이 약간 낮은 조건($0.97\;a_w$)에서의 최대 균사생장율과 비슷한 균사생장율을 나타냈다. $0.97\;a_w$에서의 균사생장율은 $25^{\circ}C$와 $30^{\circ}C$조건간에 대체로 비슷한 결과를 나타냈으며 저온($20^{\circ}C$)에서는 매우 감소하였다. PENOX의 포자발아율도 $0.995\;a_w/30^{\circ}C$에서 가장 높았으며 수분활성이 감소할수록 낮아지는 경향을 나타냈다. 저온($18^{\circ}C$)에서의 발아전 지체시간(lag phase time)은 전 $a_w$ 조건하에서 6시간 이상 그리고 낮은 수분활성조건($0.94\;a_w$)하에서는 18과 $25^{\circ}C$에서 각 18, 12시간 이상으로 나타났다. 그러나 포자생성은 $0.995\;a_w$의 높은 수분조건에 비해 약간 낮은 $0.97\;a_w$ 조건에서, 그리고 고온($30^{\circ}C$)에 비해 저온조건($20^{\circ}C$) 하에서 훨씬 양호하였다. 한편, GN MicroPlate를 이용해 PENOX의 기질로서의 95개 탄소원에 대한 이용성을 조사한 결과 $0.995\;a_w/25^{\circ}C$에서의 생태적 생식역값(niche size)은 86으로 가장 높았으며 수분스트레스조건($0.955\;a_w$)에서는 그 이용성이 낮아져 그 값은 65를 나타냈다. 그리고 고온($30^{\circ}C$)에서는 $0.995\;a_w$ 및 $0.955\;a_w$에서는 각각 84와 50을 나타내 $0.995\;a_w$에서 보다 $0.955\;a_w$ 조건에서 탄소원 이용시 온도스트레스에 더 민감하게 반응하는 것으로 나타났다. 이러한 균류생태생리학적인 정보는 효과적인 BCA의 개발을 위한 기초자료로서 유용하게 활용될 수 있을 것이다.
(Ti.W)C complex carbide was synthesized by self-propagating high temperature synthesis (SHS) chemical furnace. Attempt to find the optimal condition for synthesis of (Ti.W)C the effects of molar ratio of Ti:W:C on the synthesized powders and mechanical properties were investigated, Optimum molar ratio of these synthe-sized powder was Ti:W:C=0.7:0.2:1.0 The bulk density M,O.R Hardness Fracture toughness of (Ti.W)C complex carbide sintered at 200$0^{\circ}C$ for 60 min by hot-pressing under the pressure of 20 MPa were 7.6g/cm3, 475 MPa, 17,.7 GPa respectively.
양식 잉어의 품질을 지질성분면에서 평가하기 위하여 천연 및 양식 잉어의 지질 조성 및 이들 지질의 구성지방산을 분석${\cdot}$비교하였고, 이스라엘 잉어의 지질성분과도 비교하였다. 또 양식 잉어 및 이스라엘 잉어의 지방산과 사료 지방산을 분석${\cdot}$비교한 결과는 다음과 같다. 1. 총지질 함량은 양식 잉어가 천연 잉어보다는 약간 낮은 반면 이스라엘 잉어와는 거의 비슷하였다. 부위별로는 천연 및 양식 잉어는 내장부가 가식부보다 총지질이 2배 이상 높았으나, 이스라엘 잉어는 가식부와 내장부가 거의 비슷하였다. 2. 천연 및 양식 잉어와 이스라엘 잉어의 지질 조성은 거의 비슷한 경향을 나타내고 있었다. 즉 중성지질이 대부분을 차지하고 당지질과 인지질은 아주 적었다. 또 부위별 지질 조성을 비교해 보면 중성지질의 함량은 천연 잉어의 경우는 내장부가 가식부보다 많은 반면 양식 잉어와 이스라엘 잉어는 그 반대였다. 가식부의 당지질과 인지질 함량은 양식 잉어의 경우는 당지질이 인지질보다 많은 반면 이스라엘 잉어는 인지질이 당지질보다 많았다. 또 중성지질은 TG의 함량이 가장 많았으며 인지질은 PC와 PE가 가장 많았다. 3. 가식부의 중성지질의 중요 구성지방산 함량은 $C_{18:1},\;C_{18:2},\;C_{18:3},\;C_{22:5},\;C_{22:6}$산은 양식 잉어가 천연 잉어보다 높은 반면, $C_{16:0},\;C_{18:0},\;C_{16:1},\;C_{20:4},\;C_{20:5}$산은 천연 잉어가 양식 잉어보다 높았다. 이스라엘잉어의 경우에는 $C_{18:2}$산의 함량이 천연 및 양식 잉어에 비해 상당히 높게 나타났다. 인지질의 경우는 $C_{18:0},\;C_{18:1},\;C_{18:2},\;C_{18:3},\;_C{22:6}$산은 양식산이 천연산보다 많은 반면 $C_{16:0},\;C_{16:1},\;C_{20:4},\;C_{20:5},\;C_{22:5}$산은 천연산이 양식산보다 높았다. 4. 중성지질의 불포화도(TUFA/TSFA)는 양식산이 천연산보다 약간 높았으며, 또 이스라엘 잉어는 양식 잉어보다도 약간 더 높았다. 인지질의 경우도 이스라엘 잉어>양식 잉어>천연 잉어의 순이었다. 필수지방산 함량(TEFA)은 중성지질의 경우 가식부는 양식 잉어가 천연 잉어보다 높은 반면 내장부는 천연 잉어가 양식 잉어보다 높았다. 인지질의 경우는 가식부에서 이스라엘 잉어가 천연 및 양식 잉어보다 약간 더 높고, 또 천연 잉어가 양식 잉어보다 높았다. 5. w3고도불포화지방산 함량 (w3 HUFA)은 중성지질의 경우는 필수지방산 함량의 경향과 거의 비슷하였고 인지질의 경우는 이스라엘 잉어가 가장 높고, 양식 잉어, 천연 잉어의 순이었다. 6. 사료 지방산(C)에 대한 양식 잉어의 지방산(A)의 비(A/C) 및 이스라엘 잉어의 지방산(B)의 비(B/C)를 비교하여 보면 양식 잉어는 $C_{20:5}\;w3(0.12),\;C_{22:5}\;w6(0.53),\;C_{22:5}\;w3(0.68),\;C_{22:6}\;w3(0.26)$산이 아주 낮았고, 이스라엘 잉어는 $C_{18:3}\;w3(0.61),\;C_{20:5}\;w3(0.11),\;C_{22:4}\;w6(0.16),\;C_{22:5}\;w6(0.07),\;C_{22:6}\;w3(1.53)$산이 아주 낮게 나타났다. 따라서 주로 이들 w3고도불포화지방산들이 polyene산의 생합성 및 성장률에 깊이 관계할 가능성이 있다고 판단되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.