• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.1
• /
• pp.92-97
• /
• 1997

Beverages using mountain edible herbs(MEH) were formulated by determining optimum ratio of juices of MEH to several other ingredients. Fermented beverages were made by mixing juices(1 volume) fermented with Lactobacillus helverticus with syrup(3 volumes), followed by homogenization and flavoring . The general analysis and quality change of the beverages during storage were Peformed. The analysis of the beverages showed that the pH of Synurus deltoides and Cirsium sctidens were 3.8 and 3.7, titratable acidities were 0.50 and 0.49, optical densities were 1.201 and 1.119, respectively, The pH and color were not significantly changed when Synurus deltoides and Cirsium sctidens were stored at room temperature and 37$^{\circ}C$ for 6 months. The pH of Synurs deltoides beverage ranged 3.95~3.96 and pH of Cirsium sctidens was 3.83~3.95 at room temperature and 3.87~3.98 at 37$^{\circ}C$, respectively. The analysis of fermented beverages showed that pHs of Synurus deltoides and Cirsium sctidens were 3.65 and 3.70, titratable acidities were 0.57 and 0.60. Solids-non-fat were 3.2 and 3.1, and total counts of lactic acid bacteria were 2.5$\times$10$^{8}$ and 4.0$\times$10$^{8}$ , respectively. The changes of pH and titratable acidities stored at 4$^{\circ}C$ for 15 days were 3.39~3.56 and 0.61~0.81 for Synurus deltoides and 3.48~3.67 and 0.60~0.78 for Cirsium sctidens, respectively.

• Economic and Environmental Geology
• /
• v.25 no.1
• /
• pp.27-39
• /
• 1992

Several pyrophyllite deposits occur around the Milyang area where Cretaceous andesitic rocks and spatially related granitic rocks are widely distributed. Pyrophyllite ores consist mainly of pyrophyllite, and quartz with small amount of sericite, pyrite, dumortierite, and diaspore. The andesitic rocks and spatially related granitic rocks in this area suggest that they could be formed from the same series of a calc-alkaline magma series. The contents of $SiO_2$, $Al_2O_3$, LOI(loss on ignition) are enriched, and $K_2O$, $Na_2O$, CaO, MgO, $Fe_2O_3$ are depleted in altered andesitic rocks and ores. Enrichment of As, Cr, Sr, V, Sb and depletion of Ba, Cs, Ni, Rb, U, Y, Co, Sc, Zn are characteristic during mineralization. The pyrophyllite ores can be discriminated from the altered-and unaltered wall-rocks by an increasing of $(La/Lu)_{cn}$ from 4.18~22.13 to 8.98~55.05. In R-mode cluster analysis, Yb-Lu-Y, La-Ce-Hf-Th-U-Zr, $TiO_2-V-Al_2O_3$, Sm-Eu, $CaO-Na_2O-MnO$, Cu-Zn-Ag, $K_2O-Rb$ are closely correlated. In the discriminant analysis of multi-element data, $P_2O_5$, As, Cr and $Fe_2O_3$, Sr are helpful to identify the ores from the unaltered-and altered wall-rocks. In the factor analysis, the factors of alteration of andesitic rocks and ore mineralization were extracted. In the change of ions per unit volume, $SiO_2$, $Al^{3+}$ and LOI are enriched and $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, $Mn^{2+}$ and $Fe^{3+}$ are depleted during the alteration processes. The Milyang and the Sungjin pyrophyllite deposits could be mineralized by hydrothermal alteration in a geochemical condition of low activity ratio of alkaline ions to hydrogen ion with reference to spatially related granitic rocks.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.522-526
• /
• 2007

Structural features and electrochemical performances of cokes pyrolized from oxidized cokes were examined, and compared with KOH-activated coke. Needle cokes ($d_{002}=3.5{\AA} $), having a graphene layer structure, were changed to a single phase of graphite oxide after oxidation treatment with an acidic solution having an $NaCLO_3$/needle coke composition ratio of above 7.5, and the inter-layer distance of the oxidized coke was expanded to $6.9{\AA} $ with increasing oxygen content. After heating at $200^{\circ}C$, the oxidized coke was pyrolized to the graphene layer structure with inter-layer distance of $3.6{\AA} $. However, the change of the inter-layer distance of the needle coke was not observed in the KOH activation process. On the other hand, an intercalation of electrolyte ions into the pyrolized coke, observed at first charge, occurred at 1.0 V, in which the value was lower than that of KOH-activation coke. The cell capacitor using pyrolized coke exhibited a lower internal resistance of $0.57{\Omega}$ in 1 kHz, and a larger capacitance per weight and volume of 30.3 F/g and 26.9 F/ml at the two-electrode system in the potential range 0~2.5 V than those of the cell capacitor using KOH-activation of coke. This better electrochemical performance may be associated with structure defects in the graphene layer derived from the process of the inter-layer expansion and shrinkage.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.587-592
• /
• 2013

In this study, we prepared pelletized porous carbon adsorbent (PCA) according to the different pyrolysis temperature using activated carbon and polyvinyl alcohol (PVA) as a binder for the removal of toluene, which is one of the representative volatile organic compounds (VOCs). We investigated physical characteristics of PCA using FE-SEM, BET, TGA and evaluated their adsorption capacity for toluene using GC. It was confirmed that the formability of pellets composed of the activated carbon, PVA and solvent of mass mixing ratio was 1 : 0.2 : 0.8 was the most outstanding. Toluene adsorption capacity was evaluated by measuring the maximum time when more than 99% of toluene adsorbed on the pellet. The specific surface area of the adsorbent pyrolyzed at $300^{\circ}C$ was measured as 4.7 times in $941.9m^2/g$ compared to that of the unpyrolyzed pellet. Micropore volume and toluene adsorption capacity of PCA increased fivefold to be 0.30 cc/g and thirteenfold to be 26 hours compared to that of the unpyrolyzed pellet, respectively. These results were attributed to the change of pore size and specific surface area due to the PVA content and the different pyrolysis temperature.

• Journal of the Korea Concrete Institute
• /
• v.23 no.6
• /
• pp.723-730
• /
• 2011

It is very important to experimentally evaluate concrete behavior at elevated temperature because aggregates make up approximately 80 percent of volume in concrete. In this study, an experiment to evaluate mechanical properties of normal weight and light weight concrete of 60 MPa was conducted. Based on loading level of 0, 20 and 40 percent, the tests of 28 days compressive strength, elastic modulus, thermal strain, total strain, and transient creep using ${\phi}100{\times}200mm$ cylindrical specimens at elevated temperature were performed. Then, the results were compared with CEB (Committes Euro-international du Beton) model code. The results showed that thermal strain of light weight concrete was smaller than normal weight concrete. Also, the results showed that compressive strength of light concrete at $700^{\circ}C$ was higher than normal weight concrete and CEB code, similar to that obtained at ambient temperature. Transient creep developed from loading at a critical temperature of $500^{\circ}C$ caused the concrete strains to change from expansion to compression. The transient creep test result showed that internal force was high when the ratio of shrinkage between concrete and aggregate was more influential than thermal expansion.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.5
• /
• pp.779-785
• /
• 1996

The qualities of bread and change of phytic acid during breadmaking with whole wheat flour were investigated. The ratios of ash contents in wheat flour and whole wheat flour were 0.41% and 1.57%, respectively. The ratios of fiber contents in wheat flour and whole wheat flour were 0.14% and 1.83%, respectively. In amino acid analysis, glutamic acid was determined to be 32~36g/100g protein, which was the highest. Lysine, glycine, arginine and aspartic acid were higher in whole wheat flour than those of wheat flour. Proline, glutamic acid, and phenylalanine were higher in wheat flour than those of whole wheat flour. The ratio of phytic acid content in wheat flour and whole wheat flour was 0.312% and 0.734%, respectively. The content of phytic acid during beadmaking was decreased approximately 65% after proofing, while this was almost constant in the process of oven baking. The content of phytic acid in bread with 3% yeast had less hydrolysis than that in bread with 5% yeast during breadmaking. The phytic acid content in the 0.1% yeast food was decreased more than the 0, 0.3, and 0.5% yeast food groups. As the amount of whole wheat flour increased, the volume of bread was decreased, and color became dark. The sensory evaluation was showed the quality of bread to be the highest when the amounts of coarse whole wheat flour and fine whole wheat flour was 20% and 30%, respectively. Though the amount of coarse whole wheat flour and fine whole wheat flour were increased up to 30% and 50%, respectively, external characteristics of bread was remained in normal.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.477-477
• /
• 2008

For more than three decades, the gate dielectrics in CMOS devices are $SiO_2$ because of its blocking properties of current in insulated gate FET channels. As the dimensions of feature size have been scaled down (width and the thickness is reduced down to 50 urn and 2 urn or less), gate leakage current is increased and reliability of $SiO_2$ is reduced. Many metal oxides such as $TiO_2$, $Ta_2O_4$, $SrTiO_3$, $Al_2O_3$, $HfO_2$ and $ZrO_2$ have been challenged for memory devices. These materials posses relatively high dielectric constant, but $HfO_2$ and $Al_2O_3$ did not provide sufficient advantages over $SiO_2$ or $Si_3N_4$ because of reaction with Si substrate. Recently, $HfO_2$ have been attracted attention because Hf forms the most stable oxide with the highest heat of formation. In addition, Hf can reduce the native oxide layer by creating $HfO_2$. However, new gate oxide candidates must satisfy a standard CMOS process. In order to fabricate high density memories with small feature size, the plasma etch process should be developed by well understanding and optimizing plasma behaviors. Therefore, it is necessary that the etch behavior of $HfO_2$ and plasma parameters are systematically investigated as functions of process parameters including gas mixing ratio, rf power, pressure and temperature to determine the mechanism of plasma induced damage. However, there is few studies on the the etch mechanism and the surface reactions in $BCl_3$ based plasma to etch $HfO_2$ thin films. In this work, the samples of $HfO_2$ were prepared on Si wafer with using atomic layer deposition. In our previous work, the maximum etch rate of $BCl_3$/Ar were obtained 20% $BCl_3$/ 80% Ar. Over 20% $BCl_3$ addition, the etch rate of $HfO_2$ decreased. The etching rate of $HfO_2$ and selectivity of $HfO_2$ to Si were investigated with using in inductively coupled plasma etching system (ICP) and $BCl_3/Cl_2$/Ar plasma. The change of volume densities of radical and atoms were monitored with using optical emission spectroscopy analysis (OES). The variations of components of etched surfaces for $HfO_2$ was investigated with using x-ray photo electron spectroscopy (XPS). In order to investigate the accumulation of etch by products during etch process, the exposed surface of $HfO_2$ in $BCl_3/Cl_2$/Ar plasma was compared with surface of as-doped $HfO_2$ and all the surfaces of samples were examined with field emission scanning electron microscopy and atomic force microscope (AFM).

• The Korean Journal of Mycology
• /
• v.44 no.3
• /
• pp.155-165
• /
• 2016

Domestic and international production of Tricholoma matsutake has decreased owing to matsutake forests being left alone, host plant disease, forest fires, climate change, and so on. In order to identify strains that are suitable for the production of T. matsutake-inoculated seedlings, Pinus densiflora seedlings were inoculated with T. matsutake after in vitro rooting and mycorrhization was examined in the roots of T. matsutake-inoculated seedlings after 6 months. The mycorrhization rate was greater than 80% for 5 strains (NIFoS 421, 434, 1681, 1984, and 2001) out of 19 total strains. Seven strains (NIFoS 434, 441, 561, 562, 1016, 1807, and 1812) showed shoot/root ratios of less than 3.0 and had a seedling shoot biomass of 2.0 to 4.8 times higher than that of the root. Eight strains (NIFoS 441, 561, 562, 1016, 1807, 1812, 1984, and 2001) stimulated increases in shoot volume and three stains (NIFoS 441, 562, and 1812) promoted the growth of root biomass by mycorrhizal formation. In conclusion, 4 strains (NIFoS 434, 561, 1984, and 2001) out of 19 total strains tested showed higher mycorrhization rates and seedling growth than those of the other strains. We expect that the use of these four strains may contribute to T. matsutake-inoculated seedling production.

• KSBB Journal
• /
• v.21 no.3
• /
• pp.224-229
• /
• 2006

FEMLAB is a powerful interactive environment for modeling, solving all kinds of scientific and engineering problems based on partial differential equations(PDEs). Separation process of chiral compound in HPLC columns was simulated by FEMLAB. To study change of elution profile with isotherm models, non-competitive and competitive Langmuir adsorption isotherm were adopted. Separated material was (R, S)-ibuprofen [(R, S)-2-(4-isobutyl phenyl) propionic acid], an anti-inflammatory agent, which retain the pharmacological activity in the (S)-(+)-enantiomer. Sample concentrations were changed from 0.5 mg/ml to 2.0 mg/ml at a flow rate of 1 ml/min and flow rate varied from 1 ml/min to 3 ml/min at an ibuprofen concentration of 2.0 mg/ml and $20{\mu}l$ of injection volume. Simulated results were well fitted with experimental data.

• Tuberculosis and Respiratory Diseases
• /
• v.77 no.1
• /
• pp.18-23
• /
• 2014

Background: Combined pulmonary fibrosis and emphysema (CPFE) have different pulmonary function tests (PFTs) and outcomes than idiopathic pulmonary fibrosis (IPF). The intention of this study was to identify unknown differences between CPFE and IPF by a retrospective comparison of clinical data including baseline and annual changes in pulmonary function, comorbidities, laboratory findings, clinical characteristics and cause of hospitalization. Methods: This study retrospectively enrolled patients with CPFE and IPF who had undergone PFTs once or several times per year during a follow-up period of three years. Baseline clinical characteristics and the annual changes in the pulmonary function during the follow-up period were compared between 26 with CPFE and 42 patients with IPF. Results: The baseline ratio of forced expiratory volume in one second to forced vital capacity ($FEV_1$/FVC%) in patients with CPFE was lower than that in patients with IPF ($78.6{\pm}1.7$ vs. $82.9{\pm}1.1$, p=0.041). The annual decrease in $FEV_1$/FVC in the CPFE was significantly higher than in the IPF. The annual decreases in diffusion capacity of carbon monoxide and FVC showed no significant differences between the two groups. The symptom durations of cough and sputum were in the CPFE significantly lower than in the IPF. The serum erythrocyte sedimentation rate level at the acute stage was significantly higher than in the IPF. There were no significant differences in the hospitalization rate and pneumonia was the most common cause of hospitalization in both study groups. Conclusion: The annual decrease of $FEV_1$/FVC was in patients with CPFE significantly higher than in the patients with IPF.