• 대한기계학회논문집B
• /
• 제36권1호
• /
• pp.55-60
• /
• 2012

본 연구는 탄성 지지된 두 원기둥이 병렬로 배열되어 있을 때의 유력 진동 특성을 실험적으로 연구한 것이다. 구체적으로 2 원기둥의 각 간격(L/D, L:2 원기둥의 최단 거리, D:원기둥 직경)에서의 유속 변화에 따른 유력 진동 특성을 조사했다. 그리고 원기둥의 유력 진동 발생 메커니즘을 규명하기 위해 강제 진동 장치로 유력 진동을 정확히 재현한 가시화 실험을 하여 원기둥 주변의 흐름 패턴을 조사했다. 그 결과, 병렬 배열된 2 원기둥 사이의 스위칭 플로우의 변화에 따라 유력 진동 특성도 4 개의 패턴으로 변하는 것을 알 수 있었다. 그리고 직렬, 대각선, 병렬 배열된 2 원기둥 중에서 가장 유력 진동이 발생하기 쉬운 배열은 병렬 배열임을 본 연구를 통해 알 수 있었다.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.815-820
• /
• 2010

본 연구에서는 자동차용 가솔린엔진에 장착되는 인젝터의 연료공급 특성을 실험적으로 분석하였다. 4홀과 12홀 인젝터의 장착각 변화와 포트 마스킹의 형상변화에 따른 벽유량을 측정하고 분석하였다. 분무가시화 실험을 통하여 분무성장과정과 분사각, 연료미립화 및 분무도달거리를 분석하였다. 벽류측정 실험 결과, 벽유량은 흡기유동과 인젝터 장착각에 큰 영향을 받으며, 인젝터 장착각이 감소할수록 벽유량은 감소하였다. 마스킹의 경우 유동 면적이 감소하여 국소 유속이 증가할때 벽유량 감소에 효과를 보였다. 분무 가시화를 통하여 12홀 인젝터가 압력 변화에 대한 미립화의 강건성 측면에서 우수한 분무특성을 보였다.

• 융합정보논문지
• /
• 제9권10호
• /
• pp.87-93
• /
• 2019

치유 물질인 아마인유에 형광 물질을 소량 혼합한 혼합물을 코어 성분으로 하여 마이크로캡슐을 제조하였다. 이 마이크로캡슐을 코팅재 조성물에 균일하게 분산시켜 모르타르 표면에 도포함으로써 지기치유 보호코팅재를 제작하였다. 이 코팅재에 약 $100{\mu}m$ 폭의 스크래치 또는 균열 손상을 발생시킨 후 자외선을 조사하면서 관찰한 결과, 캡슐 함량이 증가할수록 형광 발광의 범위가 증가하였고, 20wt% 이상의 캡슐을 함유한 코팅재에서는 손상 부위가 치유물질로 거의 채워진 모습을 나타내었다. 물흡수도 시험 결과 20wt% 이상의 캡슐을 함유한 코팅재는 약 85%의 치유효율을 보였다. 손상 부위에서 나타나는 형광은 3m의 거리에서도 용이하게 식별되었다. 본 연구결과는 콘크리트 보호를 위한 마이크로캡슐형 자기치유 코팅재의 치유기능을 육안으로 용이하게 확인하는데 도움을 줄 것으로 기대된다.

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.23-34
• /
• 2020

Two-phase flow and heat transfer characteristics during the reflood phase of a single heated rod in the KHU reflood experimental facility were examined. Two-phase flow behavior during the reflooding experiment was carefully visualized along with transient temperature measurement at a point inside the heated rod. By numerically solving one-dimensional inverse heat conduction equation using the measured temperature data, time-resolved wall heat flux and temperature histories at the interface of the heated rod and coolant were obtained. Once water coolant was injected into the test section from the bottom to reflood the heated rod of >700℃, vast vapor bubbles and droplets were generated near the reflood front and dispersed flow film boiling consisted of continuous vapor flow and tiny liquid droplets appeared in the upper part. Following the dispersed flow film boiling, inverted annular/slug/churn flow film boiling regimes were sequentially observed and the wall temperature gradually decreased. When so-called minimum film boiling temperature reached, the stable vapor film between the heated rod and coolant was suddenly collapsed, resulting in the quenching transition from film boiling into nucleate boiling. The moving speed of the quench front measured in the present study showed a good agreement with prediction by a correlation in literature. The obtained results revealed that typical two-phase flow and heat transfer behaviors during the reflood phase of overheated fuel rods in light water nuclear reactors are well reproduced in the KHU facility. Thus, the verified reflood experimental facility can be used to explore the effects of other affecting parameters, such as CRUD, on the reflood heat transfer behaviors in practical nuclear reactors.

• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.94-101
• /
• 2022

The evaluation of the drag and lift as the aerodynamic performance of airfoils is essential. In addition, the analysis of the velocity and pressure fields is needed to support the physical mechanism of the force coefficients of the airfoil. Thus, the present study aims at establishing two different deep learning models to predict force coefficients and flow fields of the airfoil. One is the convolutional neural network (CNN) model to predict drag and lift coefficients of airfoil. Another is the Encoder-Decoder (ED) model to predict pressure distribution and velocity vector field. The images of airfoil section are applied as the input data of both models. Thus, the computational fluid dynamics (CFD) is adopted to form the dataset to training and test of both CNN models. The models are established by the convergence performance for the various hyperparameters. The prediction capability of the established CNN model and ED model is evaluated for the various NACA sections by comparing the true results obtained by the CFD, resulting in the high accurate prediction. It is noted that the predicted results near the leading edge, where the velocity has sharp gradient, reveal relatively lower accuracies. Therefore, the more and high resolved dataset are required to improve the highly nonlinear flow fields.

• 한국통신학회논문지
• /
• 제41권11호
• /
• pp.1557-1565
• /
• 2016

인간이 개입하지 않는 UAV 시스템은 다양한 행동을 자율적으로 수행하여 임무를 달성해야하는 어려움이 있다. 그러나 인간이 개입하지 않는 환경에서의 실제 실험은 많은 위험과 비용이 발생한다. 따라서 실제 환경 실험에 앞서 시뮬레이션 실험을 통한 검증이 필요함은 자명하다. 본 논문에서는 에이전트 기반 자율 UAV의 실험을 위한 3차원 가상환경과 이산사건 시뮬레이션 환경 구축하고 연동한 시스템을 제안한다. 재난 상황에서의 UAV 3기를 이용한 구조임무 시뮬레이션을 통해 그 유효성을 검증 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.49-59
• /
• 2010

Earthquake-induced liquefaction on saturated loose sand is well known in the world. Since Saemangeum Dike Project has a plan to be reclaimed with dredged sand on wide river, possibility of liquefaction should be checked. Section Dongjin5 was selected to evaluate possibility of liquefaction. Estimating method follows as 1) determination of PL value with SPT results, passing curve, and soil properties, 2) prediction for maximum earthquake acceleration, 3) calculation for FL value on depth with Korean specification for highway bridges, 4) visualization for possibility of liquefaction on all of project area with GIS 5) comparison with Japanese specification for highway bridges, Youd and Idriss method, and Andrus and Stokoe II method for verification, 6) ascertainment for the potential liquefaction with cyclic triaxial test. 7) establishing for countermeasure if needed. From the results, even though most of area covered with sand, no potential liquefaction exists except some areas. Those need to soil improvement with grout or attaching measurement on substructure.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.93-99
• /
• 2008

To improve the performance of plasma-DeNOx catalyst, a research on active system was performed experimentally. Two hydrocarbons, propane and diesel, were used as a reductant in this study. First, using propane, basic performances of plasma-DeNOx catalyst such as the effects of plasma and C/N ratio were measured at the various engine operating conditions. NOx conversion of catalyst was improved as plasma power or C/N ratio was increased. Next, diesel was injected in the exhaust gas flow as a reductant. The first test using diesel as a reductant is spray visualization in a high temperature flow and spray images were utilized for analysis of posterior test results. To evaluate the effect of an injection direction, it was compared with 6 installation methods of diesel injector due to THC concentrations at the inlet of plasma. From the results, injector was installed toward downstream direction below the pipe. Then, basic performances of plasma-DeNOx catalyst with various injection quantities were measured. As an injection quantity was increased, $NO_2$ conversion of plasma reactor was increased but NOx conversion of catalyst was nearly zero. This was because NOx conversion of catalyst had slowed as time goes by due to black particles which had been adhered to the catalyst.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.201-209
• /
• 2003

Virtual human models are widely used to save time and expense in vehicle safety studies. A human model is an essential tool to visualize and simulate a vehicle driver in virtual environments. This research is focused on creation and application of a human model fer virtual reality. The Korean anthropometric data published are selected to determine basic human model dimensions. These data are applied to GEBOD, a human body data generation program, which computes the body segment geometry, mass properties, joints locations and mechanical properties. The human model was constituted using MADYMO based on data from GEBOD. Frontal crash and bump passing test were simulated and the driver's motion data calculated were transmitted into the virtual environment. The human model was organized into scene graphs and its motion was visualized by virtual reality techniques including OpenGL Performer. The human model can be controlled by an arm master to test driver's behavior in the virtual environment.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.404-407
• /
• 2011

노즐 출구에서 유출되는 이차제트의 코안다 효과를 이용하는 유체역학적 추력편향제어 방법은 초음속 제트의 효율적인 추력편향을 위한 새로운 방법이다. 그동안 진행된 유동가시화 결과에서 관련 기술의 장단점이 관찰된 바 있으나 그 결과가 정성적인 한계가 있었다. 따라서 이차제트의 코안다 효과를 이용한 추력편향제어의 성능특성에 관한 정량적 관찰 연구가 진행되었으며, 이를 통한 시험장치 설계, 보정 및 자료획득 연구결과가 제시되었다.