• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.95-102
• /
• 2012

This study analyzed the observation characteristics with the subject of observation data through defining the change of the observation degree as attention /conscious observation /visual understanding. Furthermore, by obtaining the formular with which to estimate the subjects' observation amount, this study suggests a potential method for easier analysis of observation characteristics. The conclusions from the study are as the followings. First, the observation frequency was being generated with wide deviation among subjects while there was a flow-on characteristics depending on the degree of observation. These characteristics enabled the study to obtain the formular with which to estimate the observation amount. Second, the study could establish the area frequency by grade from the entire observation data. The area I was at most 4% for the area frequency but accounted for 18.2% of the entire effective observation time, and the area II 16% and 38.7% respectively. Accordingly, only considering the observation area distribution of the area I or the areas I and II shows which position of the space the subjects were observing. Third, with the subject of the relatively higher observation time at at the subject's observation characteristics, as the observation phase was getting higher, the observation time decreased more. Forth, by obtaining the formular to estimate the observation amount for observation data according to the change of observation degree, the study could find the estimating observation characteristics of additional subjects. The formular shortens the analysis time and facilitates the analysis process.

• Journal of Biomedical Engineering Research
• /
• v.28 no.2
• /
• pp.212-217
• /
• 2007

As a preliminary study for the development of electrical stimulation strategy of artificial retina, we set up a method fur the reconstruction of input intensity variation from retinal ganglion cell(RGC) responses. In order to estimate light intensity variation, we used an optimal linear filter trained from given stimulus intensity variation and multiple single unit spike trains from RGCs. By applying ON/OFF stimulation(ON duration: 2 sec, OFF duration: 5 sec) repetitively, we identified three functional types of ganglion cells according to when they respond to the ON/OFF stimulus actively: ON cell, OFF cell, and ON-OFF cell. Experiments were also performed using a Gaussian random stimulus and a binary random stimulus. The input intensity was updated once every 90 msec(i. e. 11 Hz) to present the stimulus. The result of reconstructing 11 Hz Gaussian and binary random stimulus was not satisfactory and showed low correlation between the original and reconstructed stimulus. In the case of ON/OFF stimulus in which temporal variation is slow, successful reconstruction was achieved and the correlation coefficient was as high as 0.8.

• Computers and Concrete
• /
• v.26 no.3
• /
• pp.203-211
• /
• 2020

Turkey is located in one of the most seismically active regions of in Europe. The majority of the population living in big cities are at high seismic risk due to insufficient structural resistance of the existing buildings. Such a seismic risk brings the need for a comprehensive seismic evaluation based on the risk analysis in Turkey. Determining the seismic resistance level of existing building stock against the earthquakes is the first step to reduce the damages in a possible earthquake. Recently in January 2020, the Elazig earthquake brought the importance of the issue again in the public. However, the excessive amount of building stock, labor, and resource problems made the implementation phase almost impossible and revealed the necessity to carry out alternative studies on this issue. This study aims for a detailed investigation of residential buildings in Antalya, Turkey. The approach proposed here can be considered an improved state of building survey methods previously identified in Turkey's Design Code. Antalya, Turkey's fifth most populous city, with a population over 2.5 Million, was investigated as divided into sub-regions to understand the vulnerability, and a threshold value found for the study area. In this study, 26,610 reinforced concrete buildings between 1 to 7 stories in Antalya were examined by using the rapid visual assessment method. A specific threshold value for the city of Antalya was determined with the second level examination and statistical methods carried out in the determined sub-region. With the micro zonation process, regions below the threshold value are defined as the priority areas that need to be examined in detail. The developed methodology can be easily calibrated for application in other cities and can be used to determine new threshold values for those cities.

• Computers and Concrete
• /
• v.31 no.3
• /
• pp.185-195
• /
• 2023

Antalya is located south part of minor Asia, one of the biggest cities in Türkiye. As a result of population growth and vast migration to Antalya, many parts of the city that were not suitable for construction due to its geological conditions have become urban areas, and most of these urban areas are full of poorly engineered buildings. Poor engineering has been combined with unplanned urbanization, that causes utter vulnerability to disasters in Antalya. When an earthquake-prone city, Antalya faces with an earthquake risk, fear arises in society. To overcome this problem, it has become necessary to investigate the building stock, expressed in hundreds of thousands, in a fast and reliable way and then perform an urban transformation to create the perception of structural safety. However, the excessive building stock, labor, and economic problems made the implementation stage challenging and revealed the necessity of finding alternative solutions in the field. The present study presents a novel approach for assessment and model based on a rapid visual inspection method to transform areas under earthquake risk in Türkiye. The approach aimed to rank the interventions for decision-making mechanisms by making comparisons in the scale hierarchy. In the present study, to investigate the proposed approach, over 26,000 buildings were examined in Antalya, which is the fifth largest city in Türkiye that has a population of over 2.5 Million. In the results of the study, the risk classification was defined in the framework of building, block, street, neighborhood, and district scales.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.313-322
• /
• 2020

The recognition of the risk hazards is a vital step to effectively prevent accidents on a construction site. The advanced development in computer vision systems and the availability of the large visual database related to construction site made it possible to take quick action in the event of human error and disaster situations that may occur during management supervision. Therefore, it is necessary to analyze the risk factors that need to be managed at the construction site and review appropriate and effective technical methods for each risk factor. This research focuses on analyzing Occupational Safety and Health Agency (OSHA) related to risk zone identification rules that can be adopted by the image recognition technology and classify their risk factors depending on the effective technical method. Therefore, this research developed a pattern-oriented classification of OSHA rules that can employ a large scale of safety hazard recognition. This research uses joint reasoning of risk zone Identification and numeric input by utilizing a stereo camera integrated with an image detection algorithm such as (YOLOv3) and Pyramid Stereo Matching Network (PSMNet). The research result identifies risk zones and raises alarm if a target object enters this zone. It also determines numerical information of a target, which recognizes the length, spacing, and angle of the target. Applying image detection joint logic algorithms might leverage the speed and accuracy of hazard detection due to merging more than one factor to prevent accidents in the job site.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.25-30
• /
• 2010

Purpose: This study was conducted to estimate the changes of corrected diopter and corrected visual acuity with the change in vertex distance. Also we aimed to provide basic data for refraction test. Methods: Using the trial lens, we measured the corrected diopter and corrected visual acuity after performing binocular balance test. We measured the changes of corrected diopter and corrected visual acuity in change of vertex distance. We analyzed statistical significance and relations between vertex distance and corrected diopter and corrected visual acuity. Results: There was no difference in corrected diopter with the change of vertex distance within -1.00D, but the corrected diopter increased with it over - 1.25D. In particular, the change of diopter was largest when the vertex distance increased 15 mm. At over 11.00D, there was large changes of diopter with the changes of vertex distance at 5 mm, 10 mm and 15 mm. On correlation analysis between the vertex distance and the corrected diopter, there was strong correlation (r=0.999 at 5 mm increase of vertex distance, r=0.982 at 10 mm increase and r=0.957 at 15 mm increase) and also there was significant (p<0.01). At the change of visual acuity in increased of vertex distance, the range of a decrease in visual acuity was large when the changes of vertex distance was largest. On correlation analysis between the vertex distance and the corrected visual acuity, there was strong correlation (r=0.969 at 5 mm increase of vertex distance, r=0.985 at 10 mm increase and r=0.994 at 15 mm increase) and also there was significant (p<0.01). Conclusions: The vertex distance was very important at the refraction test and at wearing spectacle. On correlation analysis between the vertex distance and the corrected diopter, and the corrected visual acuity, there was strong correlation and statistically significant. Therefore, the vertex distance should be kept at the refraction using trial lens, and the best fitting was made not to slipping forward, and so we suggested regular refitting of spectacle and the managing method of spectacle were educated to the spectacle wearers.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.119-128
• /
• 2014

This paper presents a new method for improving the quality of images corrupted by an external source that generates an attenuation and scattering of light like dust, water droplets and fog. Conventional defog methods typically encounter a distortion such that the restored image has low contrast and oversaturation of color in some regions because of the mis-estimated airlight and wrong media transmission. Therefore, in order to mitigate these problems, we propose a robust airlight selection method and local saturation evaluation method for estimating media transmission. The proposed method addresses the wrong media transmission and over-saturation problems caused by the mis-estimated airlight and thereby improves the restored image quality. The results of relevant experiments of the proposed method against conventional ones confirm the improved accuracy of atmospheric light estimation and the quality of restored images with regard to objective and subjective performance measures.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.527-536
• /
• 2010

This paper reports a reliable GRD (Ground Resolved Distance) measurement method of using natural targets instead of the method using artificial targets. For this, we developed an edge profile extraction technique suitable for natural targets. We demonstrated the accuracy and stability of this technique firstly by comparing GRD values generated by this technique visually inspected GRD values for artificial targets taken in laboratory environments. We then demonstrated the feasibility of GRD estimation from natural targets by comparing GRD values from natural targets to those from artificial targets using satellite images containing both artificial and natural targets. The GRDs measured from the proposed method were similar to the values from visual inspection and the GRDs measured from the natural targets were similar to the values from artificial targets. These results support our proposed method is able to measure reliable GRD from natural targets.

• Journal of the Korea Computer Graphics Society
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2012

Video-based modeling / rendering developed to produce photo-realistic video contents have been one of the important research topics in computer graphics and computer visions. To smoothly combine original input video clips and 3D graphic models, geometrical information of light sources and cameras used to capture a scene in the real world is essentially required. In this paper, we present a simple technique to estimate the position and orientation of an optimal light source from the topology of objects and the silhouettes of shadows appeared in the original video clips. The technique supports functions to generate well matched shadows as well as to render the inserted models by applying the estimated light sources. Shadows are known as an important visual cue that empirically indicates the relative location of objects in the 3D space. Thus our method can enhance realism in the final composed videos through the proposed shadow generation and rendering algorithms in real-time.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.184-188
• /
• 2008

Performance degradation of concrete structures is generally caused by structural deteriorations, such as cracks. It may result in serious defects of concrete structures. Methods of damage detection are used a visual angle of human or non-destructive test, and they are using various sensors. Problems of crack damage detection are occurred to directions of cracks by using 1 axial type of accelerometer in concrete element. In addition, these sensors are not used to occurring fire in RC building. Thermocouple sensors are able to using measurement of temperature in fire, and then deformations of main element and structures are not used. In this study, fundamental studies for development of multiple function sensor using 3 axial type of accelerometer and electric resistance property of thermocouple sensors are discussed estimation to stability of structures when happened form active load or fire, and so on.