• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1261-1263
• /
• 2003

Based on twelve observational stations low meteorological visibility (LMV) data during November 2002 to April 2003, the spatial distribution of LMV over Hongkong area (113.8$^{\circ}$ E-114.4$^{\circ}$ E, 22.1$^{\circ}$ N-22.4$^{\circ}$ N) is studied, using a PCA method. Optical spectrum of NOAA-16 associated with LMV shows that the significant effect factors correlated with LMV in the leading mode are the difference or rate between the visible and near-IR channels and single visible channel. A successful retrieval of LMV is done and a regression equation with a multiple correlation coefficient of 0.67 is obtained.

• 대기
• /
• 제22권1호
• /
• pp.13-28
• /
• 2012

The $PM_{10}$ concentration data is useful for indentifying intensity and a transport way of Asian dust. However, it is difficult to identify them properly due to the limited spatial resolution and coverage. Therefore, a methodology to estimate $PM_{10}$ concentration using visibility data obtained from synoptic observation was developed. To derive the converting function, correlation between visibility and $PM_{10}$ concentration is investigated using visibility and $PM_{10}$ concentration data observed at 20 stations in Korea from 2005 to 2009. To minimize bias due to atmospheric moisture, data with higher relative humidity over a critical value were eliminated while deriving $PM_{10}$-visibility relationship. As a result, an exponentially decreasing function of visibility is obtained under the condition that relative humidity is less than 82%. Verification of the visibility converting function to $PM_{10}$ concentration was carried out for the dust cases in 2010. It was found that spatial distributions of $PM_{10}$ calculated by visibility are in good agreement with the observed $PM_{10}$ distribution, especially for the strong dust cases in 2010. And correlation between the derived and observed $PM_{10}$ concentration was 0.63. We applied the function to obtain distributions of $PM_{10}$ concentration over North Korea, in which concentration data are not available, and compared them with satellite derived dust index, IODI distributions for dust cases in 2010. It is shown that the visibility function estimates quite similar patterns of dust concentration with IODI image, which suggests that it can contribute for prediction by indentifying transport route of Asian dust.

• 한국국방경영분석학회지
• /
• 제31권2호
• /
• pp.13-27
• /
• 2005

The most portion of the Korean Army's ammunition management system has achieved efficiency and automation based on the Ammunition Information System (AIS). However, a few limitations for the automation system constructed at each site, exist in verifying the real time situation. At the present state of technology, the asset visibility of the located ammunitions is basically achieved. On the other hand, the ammunitions in the middle of transportation are difficult to achieve asset visibility. The RFID(Radio Frequency Identification) technology could be an appropriate solution in these circumstances. Therefore, the objective of this paper is to apply the RFID to improve defense asset management, total asset visibility and ammunition distribution efficiency in the ammunition management system of the Korean Army.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2004년도 추계학술대회 논문집
• /
• pp.411-412
• /
• 2004

• 한국조경학회지
• /
• 제26권3호
• /
• pp.78-78
• /
• 1998

The purpose of this research is to develop a CAD-based program for data analysis of digital elevation model(DEM) on the aspect of landscape assessment. When handling DEM data as a visual simulation of topographic landscape, it is basic interest to analyze visible area and visualize visual sensitivity distributions. In reference with landscape assessment, more intuitive and interactive visualizing tools are needed, specially in area of visual approach. For adaptability to landscape assessment, algorithmic approaches to visibility analysis and concepts for visual sensitivity calculation in this study were based on processing techniques of entity data control functions used in AutoCAD drawing database. Also, for the purpose of quantitative analysis, grid-type 3DFACE entities were adopted as mesh unit of DEM structure. Developed programs are composed of main part named VSI written in AutoLISP and two of interface modules written in dialog control language(DCL0 for user-oriented interactive usage. Definitions of camera points(view points) and target points(or observed area) are available alternatively in combined methods of representing scenic landscape, scenery, and sequential landscape. In the case of scene landscape(single camera to fixed target point), only visibility analysis in available. And total visibility, frequency of cumulative visibility, and visual sensitivity analysis are available in other cases. Visual sensitivity was thought as view angle(3 dimensional observed visual area) and the strengths were classified in user defined level referring to statistical characteristics of distribution. Visibility analysis routine of the VSI was proved to be more effective in the accuracy and time comparing with similar modules of existing AutoCAD third utility.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.186-195
• /
• 2017

Obtaining accurate visibility measurements is a common atmospheric optical problem, and of vital significance to civil aviation. To effectively evaluate and improve the accuracy of visibility measurements, an outdoor atmospheric simulation chamber with dimensions of $1.8{\times}1.6{\times}55.7m^3$ was constructed. The simulation chamber could provide a relatively homogeneous haze environment, in which the visibility varied from 10 km to 0.2 km over 5 hours. A baseline-changing visibility measurement system was constructed in the chamber. A mobile platform (receiver) was moved from 5 m to 45 m, stopping every 5 m, to measure and record the transmittance. The total least-squares method was used to fit the extinction coefficient. During the experiment conducted in the chamber, the unit weight variance was as low as $1.33{\times}10^{-4}$ under high-visibility conditions, and the coefficient of determination ($R^2$) was as high as 0.99 under low-visibility conditions, indicating high stability and accuracy of the system used to measure the extinction coefficients and strong consistency between repeated measurements. A Grimm portable aerosol spectrometer (PAS) was used to record the aerosol distribution, and then Mie theory was used to calculate the extinction coefficients. The theoretical results were found to be consistent with the measurements and exhibited a positive correlation, although they were higher than the measured values.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.182-183
• /
• 2007

In large area scanning with a micro-electron column, the optimal operation condition for the best visibility was studied. A micro-electron column can realize nearly unlimited scanning size with distribution of micro-electron columns, therefore applicable to large sized SEM or VSEM. The maximum scanning size with a micro-electron column was about $200cm^2$ when only one deflector was employed. However, a double deflector equipped micro-electron column provided 1.7 times larger scanning area with the same visibility as that of one deflector.

• 터널과지하공간
• /
• 제20권2호
• /
• pp.92-96
• /
• 2010

본 연구에서는 지하공간에서 화재 발생시 배연장비의 연기배출 성능을 평가하기 위하여 실험을 실시하였다. 배연장비로는 이동식 송풍기를 사용하였으며 가연물질로는 에탄올을 사용하였다. 한 변의 길이가 80cm의 정사각형 화원을 사용하였으며 최대 열방출률은 약 460 kW이다. 급기방식 배연의 영향을 평가하였다. 급기방식의 경우 실내의 가시도 향상 및 온도감소 효과를 확인할 수 있었다.

• Imaging Science in Dentistry
• /
• 제54권1호
• /
• pp.25-31
• /
• 2024

Purpose: The purpose of this study was to clarify the panoramic image differences of cleft alveolus patients with or without a cleft palate, with emphases on the visibility of the line formed by the junction between the nasal septum and nasal floor(the upper line) and the appearances of the maxillary lateral incisor. Materials and Methods: Panoramic radiographs of 238 patients with cleft alveolus were analyzed for the visibility of the upper line, including clear, obscure or invisible, and the appearances of the maxillary lateral incisor, regarding congenital absence, incomplete growth, delayed eruption and medial inclination. Differences in the distribution ratio of these visibility and appearances were verified between the patients with and without a cleft palate using the chi-square test. Results: There was a significant difference in the visibility distribution of the upper line between the patients with and without a cleft palate (p<0.05). In most of the patients with a cleft palate, the upper line was not observed. In the unilateral cleft alveolus patients, the medial inclination of the maxillary lateral incisor was more frequently observed in patients with a cleft palate than in patients without a cleft palate. Conclusion: Two differences were identified in panoramic appearances. The first was the disappearance (invisible appearance) of the upper line in patients with a cleft palate, and the second was a change in the medial inclination on the affected side maxillary lateral incisor in unilateral cleft alveolus patients with a cleft palate.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권8호
• /
• pp.241-249
• /
• 2021

The aim of the research is to evaluate the impact of social media marketing (with special reference to Facebook) on the brand preference of customers with regard to smart mobile phones. Since Facebook has become very popular today and a trend has arisen to use social media as a marketing tool, the researcher intended to evaluate the impact of social media marketing on brand preference, as the findings would provide valuable insight for future businesses. Social media as measured social media visibility, social media engagement, and social media influencewas the independent variableand brand preference was the dependent variable. The convenience sampling method was used where the sample was taken from a group of people easy to contact or to reach. A sample of 186 young males and females was selected. Factor loading and factor analysis were used to analyze the data and find the most influencing factors on brand preference. Reliability analysis, validity analysis, and regression analysiswere performed to analyze the data. The R² value is 0.320 implying that 32.00% of the variance in brand preference is explained by social media influence, social media engagement, and social media visibility. The findings show thatsocial media visibility, social media engagement, and social media influencehave a positive impact on brand preference.