• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.1
• /
• pp.143-154
• /
• 2021

This study attempted to develop winter jackets and pants patterns reflecting the latest comfortable and active school uniform trends, using middle school boy avatars having various body shapes. Jacket and pants pattern-drawing methods and margins differed. Based on the results, research prototypes were prepared. Then, virtual wear prospective drawings, clothing pressure, and appearance were assessed according to body shape. Jackets were assessed using 25 factors, while pants were assessed using 19. Then, correlations between the jackets and pants were analyzed. According to the analysis, the reason why the dart & tuck position and margin were rated low was confirmed. In a virtual wear assessment on jacket patterns by body shape, a significant difference was found in all categories, except for fit and shape at the front bottom, sleeve length on the side, and the center back line. The virtual wear assessment on the pants patterns by body shape also revealed a significant difference in all categories, except for pants length. In jackets, a significant influence was observed around the shoulders and waist in Type 1 and around the belly in Type 2. On the contrary, for pants, a significant influence was found around the hip and waist in Type 1 and around back crotch in Type 2. Therefore, they should be considered when making of jackets and pants. The above results suggested that jacket and pants patterns should vary depending on body shape. It is anticipated that there should be further studies comparing brand-name school uniforms for middle school girls and school uniforms by body shape.

• The Korean Journal of Community Living Science
• /
• v.22 no.1
• /
• pp.53-61
• /
• 2011

We have made knitwear in a different way from the typical woven pattern; it does not have the dart, even for women's tops. The purpose of this research was to compare the fit and appearance of the torso pattern for circular knitted fabric between virtual try-on garments and real garments. First, a woman in her 20's was scanned by a 3D body scanner, and thus producing a virtual avatar. I prepared knit patterns and created a torso pattern appropriate for circular knitted fabric. Next, I measured the body size of the avatar. The 2D patterns for the torso and sleeves were developed using the Yuka Super ALPHA : Plus. The 3D virtual garments were made from the imported 2D patterns and were then tried on the 3D virtual avatars. Finally, the fit of the real garments and the virtual garments was compared. While the shape of the virtual try-on garments were similar to the real garments, the folding and sagging were different. This study found the length was the same as woven wear. However the actual bust size and the clothing size were the same which is not a typical characteristic of woven wear. In the case of hem measurement, more space was needed than actual body size but less space was needed than in woven patterns.

• Journal of Korea Multimedia Society
• /
• v.9 no.9
• /
• pp.1184-1195
• /
• 2006

The Internet has brought many changes in our daily lives. Now the recognition on the Internet fashion shopping matt has increased and it requires scientific and systematic research to understand the Internet fashion marketing system more correctly and to strengthen the marketing activity at the virtual space. A big shortcoming of an Internet fashion mall is that the consumers can't wear clothes themselves. Currently there is no system to cover the shortcoming, It would be nice if a 3D avata wears the clothes on behalf of a consumer after inputting the information of physical sizes of a consumer. The consumers can select many clothes, accessories and even the background. After establishing a complete virtual fashion shopping mall, the consumers who sue the Internet fashion shopping mall could wear the clothes at an online shop establishing an online shopping environment. It will be a sole way to ensure the trust of the consumers. This paper studies the read in reflection by PC camera and sample the edge detection. Virtual fitting system that wears virtual fitting model some clothes is establishment.

• Journal of the Korean Society of Costume
• /
• v.65 no.5
• /
• pp.62-73
• /
• 2015

The aim of this research is to propose the final shirt design modified for new senior women that fulfills their emotional and physical needs. The modifications were based on the results of in-depth interviews and literature search, and the study was conducted in order to understand the desires and preferences of senior women, as consumption of outdoor-wear by the group continues to increase. To develop the design of outdoor-wear that satisfies the physical and emotional qualities and preference of the new senior women, six different designs with lines, combined materials, as well as materials that were layered, pleated and draped were proposed using virtual-dressing simulation software. Then, the modified designs were derived from the six original designs by reflecting the opinions collected in the in-depth interviews with eleven women in their 50s. The responses in the interviewed showed a preference for lines, pleats and layers, as these features made the clothes look trendy, gave it a slender-look, and improved the body shape of the women. As the color is the critical factor for outdoor-wear, there was an overwhelming preference for primary colors by the women, which was in contrast to their color preference in general clothes. A sleeve design modification was proposed to convert the half-sleeves to 3/4-long sleeves in order to account for changes in body temperature at menopause, and to satisfy the aesthetic needs for covering wrinkles. Research of new senior outdoor-wear designs will help segment and differentiate strategies for the increasingly fierce competing outdoor market, as well as l provide directions in the design creation process using the simulation of 3D virtual model.

• The Journal of Korea Robotics Society
• /
• v.14 no.2
• /
• pp.150-156
• /
• 2019

Haptic systems have been widely used for both virtual reality and augmented reality application including game, entertainment, education and medical sectors. Clothing designers and retailers initiated using AR and VR technologies to help the consumers find style with the perfect fit. Most of the developed augmented reality shopping is implemented by overlapping the image of the clothes on the customer so that he/she can find the fit. However, those are only visual information and the customer cannot experience the real size and the stiffness of the clothes. In this paper, we present the haptic upper garment which provides the haptic feedback to the user using cables. By controlling the length of the cable, the size of the clothes is set and by stiffness control, the compliance of the fabric is implemented. The haptic garment is modeled for precise control and the distributed controller architecture is described. With the haptic upper garment, the user's experience of the virtual clothes is greatly enhanced.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.47-54
• /
• 2013

The main cause of die failure in hot forging is wear. Die wear directly generates the gradual loss of part tolerances, thereby causing deterioration in the dimensional accuracy of a forged part. It is very important to estimate forging cycles, called as die life, at which the die should be repaired or replaced. In this study, in order to estimate the hot forging die life, the finite element simulation of wear on an asymmetric part like a ball joint socket used in vehicle was carried out based on Archard's model. Finite element simulation results were compared with wear amounts of a used die that were measured using a contact stylus profilometer. The simulation results were in relatively good agreement with measurements obtained from the virtual die which was used by 7,000 forging cycles in a forging industry. Consequently, the die life in the hot forging of the ball joint socket was estimated by 10,500 forging cycles on the finisher die.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.75-81
• /
• 2021

With the development of advanced information and communication technology, Generation Z, familiar with digital culture, is drawing keen attention as a major consumer of the fashion industry. In this study, casual wear for Generation Z, who is proficient in digital devices and prefers information acquisition and lifestyle over the Internet, was designed using 3D virtual simulation and developed into four looks: Gulish, Sportive, Easy and Contemporary. The use of simulation of 3D virtual clothing in costume design can build digitalization of future fashion industry through convergence with digital fashion design planning and production process in fandemic environment and strengthen online platform distribution. In a business environment that continues to innovate to enhance work efficiency by introducing an Untouch fashion production system, the use of 3D virtual clothing technology can increase the efficiency of sustainable management through 3D sample production, online fitting, modification, and final critic processes to reduce the time and cost of human and physical resources and review.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.237-246
• /
• 2021

This study aims to analyze short sleeve cycling tops from three brands for a change in garment fit and pressure depending on the static and cycling postures. To this end, it used a 3D virtual garment system to virtualize the garments. Further, a cross-section of the 3D virtual garment data was obtained, and the space length was measured in the design-X program to prove the objectivity of the 3D virtual garment. The results indicated that three brands had a large space length at the front than the back because of the bent posture in cycling. Therefore, appropriate ease was required for the waist and abdomen. Although there were various cutting lines of the bodice panel by brand, the design of the cutting lines should consider the changes in the surface to reflect the bent posture in cycling. The results of this experiment confirmed that the wrinkles present in the 3D virtual garment were reflected in the cross-section and that the space length was small in the high-stress area, as shown in red. Therefore, it was proven the stress of the 3D virtual garment could be used for 3D virtual garment evaluation.

• The Research Journal of the Costume Culture
• /
• v.31 no.5
• /
• pp.627-639
• /
• 2023

This study seeks to increase the satisfaction of elderly men when purchasing and wearing ready-to-wear clothes by designing a slacks pattern suitable for their body type, which is determined by analyzing their lower bodies using virtual avatars and 3D virtual simulation system. The study found the following. First, based on virtual visualization of the comparison slacks pattern, the waistline position was consistently the lowest scored question among the evaluation survey items. Interpretation of this dissatisfaction suggests that, because the front waistline falls below the abdomen, the lower body, and especially the abdominal shape, is unpleasantly emphasized. Second, by using a virtual simulation system, the study developed a new slacks pattern that considered the concerns of elderly men. The primary measurement changes were as follows: front waist girth W/4+1.5cm+0.5cm, back waist girth W/4+1.5cm-0.5cm, front hip girth H/4+2.5cm-0.5cm, back hip girth H/4+2.5cm+0.5cm. Third, the new slacks pattern's appearance was evaluated more highly than the comparison pattern, confirming the new pattern's appropriateness for elderly men. This study demonstrates how slacks and other clothing patterns designed in a 3D virtual garment simulator can be used to design more appealing clothing for elderly men, increasing the satisfaction of wearing ready-made clothes at older ages.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.275-283
• /
• 2023

The progressive wear of teeth is a physiologic process of aging, but excessive wear can lead to occlusal disharmony, tooth sensitivity and pulp exposure, decreased masticatory efficiency, and aesthetic problems. It should be treated by evaluating the cause of tooth wear and establishing a stable centric relation with appropriate vertical dimension of occlusion and occlusal plane. The present case report successfully rehabilitated a full-mouth case of a severely worn dentition with the use of digital facebow transfer and virtual articulator.