• 소음진동
• /
• 제9권6호
• /
• pp.1200-1209
• /
• 1999

This paper reports a peculiar example of flow-induced vibration in a very large plant and the whole procedure of reducing the vibration. During the operation of flue gas desurfurization unit of the thermal power plant, serious vibration was dtected at all around the plant. The worst vibration was recorded on the heat exchanger surface, which weighed 180 tones, as 17.8 m/$s^2$ in vibration amplitude at 34 Hz. To identify the vibration, frequency analysis on the response vibration as well as on the expected excitation forces and the system resonance was executed. This investigation revealed that the cause of the vibration was vortex shedding from the circular pipes in the heat exchanger. Vortices from the pipes excited acoustic resonance in the heat exchanger room, which, in turn, made the structure vibrate. Through inserting the baffles between the pipes, which had an effect of cutting the acoustic wave at resonance frequency, the vibration was eliminated dramatically.

• 전자공학회논문지
• /
• 제53권10호
• /
• pp.109-115
• /
• 2016

이 논문에서는 레이저를 통한 진동판 스캔과 열화상 카메라를 사용한 진동판 촬영, 두 가지 방법을 비교하며 슬림 스피커의 분할 진동을 검출하는 방법에 대해 살펴본다. 슬림 스피커는 평판형의 구조적인 특성상 분할진동이 두드러지게 나타나고, 설치되는 공간이 좁아 무빙 코일에서 발생하는 열의 냉각이 제한적이다. 이런 특성으로 인해 슬림 스피커에서 분할진동이 제품의 품질에 큰 영향을 미친다. 본 연구에서는 진동판에서 일어나는 분할진동의 영향과 무빙 코일에 의한 진동판의 열전달 관계를 비교 탐색한다. 비교를 위한 실험은 분할진동 모드의 측정과 진동판의 열 변화 측정을 진동판 스캔과 열화상 카메라 촬영의 2단계의 실험으로 진행한다. 동일 주파수에서 발생하는 분할진동 모드와 열전달 형태를 비교하여 서로 간에 어떤 영향을 미치고 있는 지 파악할 수 있다. 그리고 이를 통해 발견한 연관성을 통해 쉽게 촬영할 수 있는 열화상만으로도 슬림 스피커가 가지는 분할진동의 형태와 경향성을 빠르게 파악하여 최적 설계에 도움이 되는 자료로 사용할 수 있을 것이다.

• Composites Research
• /
• 제17권5호
• /
• pp.78-84
• /
• 2004

본 연구에서는 $\textrm{Al}_2\textrm{O}_3$와 Ti-6Al-4V로 이루어진 두 가지 유형의 경사기능재료 평판에 대한 열적 거동을 조사하였다. 경사기능 평판의 재료 물성치는 체적비의 멱지수 값에 따라 두께방향으로 연속적으로 변화하고, 평판의 윗면과 아랫면에 열하중이 가해지며 일정한 온도 조건을 유지한다고 가정하였다. FCM 사각 평판의 운동방정식은 해밀턴 변분 원리로 구하였으며, 나비에 기법으로 수치해를 얻었다. 체적비와 온도 변화에 대한 FCM 평판의 정적처짐과 고유진동수의 영향에 대하여 고찰하였다.

• Steel and Composite Structures
• /
• 제23권3호
• /
• pp.251-261
• /
• 2017

In this paper, thermal effect on the vibration and stability of initially stressed sandwich plates with functionally graded material (FGM) face sheets is analyzed. Material properties of FGM face sheet are graded continuously in the thickness direction. The variation of FGM properties assumes a simple power law distribution in terms of the volume fractions of the constituents. The governing equations of arbitrarily initially-stressed sandwich plates including the effects of transverse shear deformation and rotary inertia are derived. The initial stress is taken to be a combination of a uniaxial extensional stress and a pure bending stress in the examples. The eigenvalue problems are formed to study the vibration and buckling characteristics of simple supported initially stressed FGM/metal/FGM plates. The effects of volume fraction index, temperature rise, initial stress and layer thickness of metal on the natural frequencies and buckling loads are investigated. The results reveal that the volume fraction index, initial stresses and layer thickness of metal have significant influence on the vibration and stability of sandwich plates with FGM face sheets.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.259-263
• /
• 2006

The applicability of UPT (Ultrasound Pulse Thermography) for real-time defect detection of the ceramic heating plate is described. The ceramic heating plate with superior insulation and high radiation is used to control the water temperature in underwater environment. The underwater temperature control system can be damaged owing to the short circuit, which resulted from the defect of the ceramic heating plate. A high power ultrasonic energy with pulse duration of 280 ms was injected into the ceramic heating plate in the vertical direction. The ultrasound excited vibration energy sent into the component propagate inside the sample until they were converted to the heat in the vicinity of the defect. Therefore, an injection of the ultrasound pulse wave which results in heat generation, turns the defect into a local thermal wave transmitter. Its local emission is monitored and recorded via the thermal infrared camera at the surface which is processed by image recording system. Measurements were Performed on 4 kinds of samples, composed of 3 intact plates and the defect plate. The observed thermal image revealed two area of crack in the defective ceramic heating plate.

• 동력기계공학회지
• /
• 제17권3호
• /
• pp.23-27
• /
• 2013

In this research paper, we study on how to decrease the high vibration of turbine hood casings which are main facilities of power generation industry. Cause of Standard coal-fired power 500MW facilities turbine hoods' high vibration is that Natural frequency of hood casing designed in near domain frequency, when they are making hoods. We investigate to reduce high vibration at hood casing. We use FEM method to found how to avoid resonance, and test to confirm that our FEM result. We Finally attach minium mass plate at hood casing to avoid resonance and high vibration reduce lower $100{\mu}m$.

• Advances in nano research
• /
• 제10권1호
• /
• pp.25-42
• /
• 2021

In this article, the vibration behavior of embedded Functionally Graded Nanoplate (FGNP) employing nonlocal Kirchhoff's plate theory has been investigated under hygrothermal environment. The FGNP is considered to be supported by Winkler-Pasternak foundation. The Eringen's differential theory is used for size effect on the vibration of the FGNP. Rayleigh-Ritz method with orthogonal polynomials are employed for the governing equations and edge constraints. The advantage of this method is that it overcomes all the drawbacks of edge constraints and can easily handle any combinations of mixed edge constraints. The coefficients viz. moisture expansion, thermal expansion and elastic coefficients are considered to be transversely graded across the FGNP. The similarity of the calculated natural frequencies is examined with the previous research, and a good concurrency is seen. The objective of this article is to analyze the parameters' effect on the nondimensionalized frequency of embedded FGNP under hygrothermal environment subjected to all possible edge constraints. For this, uniform and linear rise of temperature and moisture concentration are considered. The study highlights that the nonlocal effect is pronounced for higher modes. Moreover, the effect of the Pasternak modulus is seen to be prominent compared to the Winkler modulus on non dimensionalized frequencies of FGNP.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.665-670
• /
• 2002

Pleasantness or quietness becomes one of the most important factors for residential designs recently. Especially for apartments, the noise generated by falling objects becomes a sensitive issue these days. To overcome the problem of the impact noise in apartments, the floor design has been changed. To reduce the transmissibility of the noise, composite floor structures are devised and implemented for the construction of apartments. In this paper, the noise reduction performance of a composite floor plate with holes is analyzed. Computational modelings for the structures are developed and its performance is evaluated by using the finite element method. The results show that the noise can be well reduced with the multi-layer composite floor plates with holes.

• 한국소음진동공학회논문집
• /
• 제13권2호
• /
• pp.144-150
• /
• 2003

Pleasantness or quietness becomes one of the most important factors for residential and office building designs recently. Especially for apartments, the noise generated by falling objects becomes a sensitive issue these days. To overcome the problem of the impact noise in apartments, the floor design has been changed. To reduce the transmissibility of the noise. composite floor structures ate devised and implemented for the construction of apartments. In this paper. the noise reduction) performance of a composite floor plate with holes is analyzed. Computational models for the structures are developed and its Performance is evaluated by using the finite element method. The results show that the noise can be significantly reduced with the multi-layer composite floor plates with holes.

• Steel and Composite Structures
• /
• 제50권5호
• /
• pp.563-581
• /
• 2024

This paper presents a novel finite element model for the free vibration analysis of variable-thickness functionally graded porous (FGP) microplates resting on Pasternak's medium in the hygro-thermal environment. The governing equations are established according to refined higher-order shear deformation plate theory (RPT) in construction with the modified couple stress theory. For the first time, three-node triangular elements with twelve degrees of freedom for each node are developed based on Hermitian interpolation functions to describe the in-plane displacements and transverse displacements of microplates. Two laws of variable thickness of FGP microplates, including the linear law and the nonlinear law in the x-direction are investigated. Effects of thermal and moisture changes on microplates are assumed to vary continuously from the bottom surface to the top surface and only cause tension loads in the plane, which does not change the material's mechanical properties. The numerical results of this work are compared with those of published data to verify the accuracy and reliability of the proposed method. In addition, the parameter study is conducted to explore the effects of geometrical and material properties such as the changing law of the thickness, length-scale parameter, and the parameters of the porosity, temperature, and humidity on the free vibration response of variable thickness FGP microplates. These results can be applied to design of microelectromechanical structures in practice.