• 제목/요약/키워드: very early strength

검색결과 188건 처리시간 0.027초

진동이 양생중인 콘크리트에 미치는 영향에 관한 연구 (An Experimental Study on the Effects of Early-Age Vibrations on the Properties of Concrete)

  • 오병환;송혜금;조재열
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
    • /
    • pp.531-537
    • /
    • 1998
  • Recently, the pile driving or blasting works are increasingly done in many areas to perform large scale construction projects. The vibrations from these blasting works may affect the properties of concrete, especially young concrete. The purpose of present study is to explore the effects of vibration at early ages on the properties of concrete. To this end, comprehensive experimental study is conducted in the present study. The major test variables are peak particle velocity or vibration velocity and the age at vibration. The compressive strengths and bond strengths are measured for all the specimens at 28days after casting. The duration of vibration is fixed to 30 minutes for all cases. The results indicate that the strength increases for vibration velocity less than about 0.25cm/sec and decreases for vibration velocity larger than 0.5cm/sec. The effect of age at vibration is not pronounced and shows almost similar behavior for the age at vibration of 0 to 12 hours range. The present study provides some important guidelines to control the construction or vehicle vibrations for the concrete at very early ages.

  • PDF

화산재를 대량 사용한 콘크리트의 특성 (A Study on the Engineering Properties of Concrete Using High Volume of Volcanic Ash)

  • 조병완;구자갑;박승국;이연진
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
    • /
    • pp.33-36
    • /
    • 2005
  • Recently, the use of volcanic-ash as a part of cement content in concrete is very common. But, it has been indicated that the compressive strength of concrete using large amount of volcanic-ash as a part of cement content in early age is low and carbonation velocity is fast. To solve those problems, High Volume Volcanic-Ash Concrete which contained large amount of volcanic-ash as a part of fine aggregate has been proposed. This is an experimential study to compare and analyze the properties of High Volumn Volcanic-Ash Concrete according to the replacement method and ratio of volcanic-ash. For this purpose, the mix proportion of concrete according to the replacement method(PL, C10, C150, A10, A100, A150) And then slump, setting time, bleeding, compressive strength, tensile strength and carbornation test were performed. According to test results, it was found that the compressive strength of the concrete using the volcanic-ash as a part of fine aggregate(A) was higher than that of the concrete using the volcanic-ash as a part of cement content(C). And, the compressive strength of the A concrete increased in early age as well as in long tern age as the volcanic-ash content increased.

  • PDF

EVA와 초조강시멘트를 사용한 폴리머 시멘트 슬러리 도장철근의 부착강도에 관한 연구 (A Study on the Bond Strength of Coated Rebar by Polymer Cement Slurry Made of EVA and Ultra High-Early Strength Cement)

  • 형원길;조영국
    • 콘크리트학회논문집
    • /
    • 제27권6호
    • /
    • pp.633-640
    • /
    • 2015
  • 본 연구는 EVA와 초조강시멘트로 만든 폴리머 시멘트 슬러리(PCS)로 도장한 도장철근의 부착강도 개선에 영향을 미치는 PCS 도장재 배합에 관한 연구로 도장두께, 폴리머 시멘트비, 도장재의 양생재령을 변화시켜 배합을 설정하여 부착강도 시험을 실시하였다. 본 연구결과, PCS 도장철근의 부착강도는 거의 모든 배합에서 도장하지 않은 보통철근 및 에폭시철근에 비해 높은 부착강도를 나타냈는데 도장철근의 최대 부착강도는 보통철근에 비해 1.32배, 에폭시철근에 비해 1.38배 높게 나타났다. 도장두께는 대체로 얇은 도장두께인 $75{\mu}m$$100{\mu}m$에서 부착강도가 높게 나타났으며 폴리머 시멘트비에 따른 영향은 크게 나타나지 않았으나, 내구성면에서 폴리머 시멘트비를 80~100% 범위를 확보하는 것을 제안할 수 있었다. 또한 도장재의 양생재령에 있어서는 7일에서 가장 높은 부착강도를 나타냈으나, 재령 1일에 있어서도 보통철근과 에폭시철근에 비해 높은 부착강도를 보여 현장 시공성 측면에서 1일 재령을 제안 할 수 있었다.

초기재령에서 동결을 받은 고로슬래그 콘크리트의 강도발현특성에 관한 실험적 연구 (An Experimental Study on Strength Properties of Concrete Using Blast-Furnace Slag Subjected to Freezing at Early Age)

  • 최성우;반성수;유득현;최봉주
    • 콘크리트학회논문집
    • /
    • 제15권1호
    • /
    • pp.43-51
    • /
    • 2003
  • 동절기 콘크리트 시공에 있어서 낮은 외기온에 따른 콘크리트의 강도발현이 저하되며, 동결 및 융해에 따른 콘크리트의 내부조직의 이상으로 인해 내구성이 저하하는 것으로 알려져 있다. 따라서 한중콘크리트 제조시 조기강도를 확보하기 위해 혼화재의 사용을 경시하고 있는 실정이다. 본 연구는 한중콘크리트의 제조시 혼화재의 사용에 따른 초기동해의 영향을 평가하기 위한 실험을 실시한 것으로서, 초기동해를 입히기 위한 실험 조건으로서, 본 연구는 초기 재령에서 콘크리트에 영향을 미치는 동결온도 및 동결지속시간, 초기양생시간에 따른 혼화재를 사용한 콘크리트의 강도발현특성을 검토하였으며, 실험조건으로서 초기양생기간을 비빔 직후, 12, 24, 48시간, 동결시간을 12, 24, 48시간, 동결온도는 -1, -10, $-15^{\circ}C$로 설정하여 실험을 실시하였다. 본 연구의 실험결과 고로슬래그 미분말의 대체율이 증가할수록 초기재령에서의 강도발현은 지연되는 것으로 나타났으나, 응결을 고려할 경우 고로슬래그 미분말 대체율 20%까지는 거의 차이가 없는 것으로 나타났다. 또한 동결에 따른 강도발현특성을 살펴보면, 비빔 직후 동결시킨 경우에서는 동결온도와 상관없이 재령 28일에 있어서 동결 받지 않은 경우의 80%를 발현하는 것으로 나타났으나, 12시간 이상 양생을 실시한 후 동결시킨 경우에 있어서는 동결온도 및 동결시간과 상관없이 동결시키지 않은 경우와 거의 유사한 강도를 발현하는 것으로 나타났으며, 모든 실험조건에서 혼화재를 사용한 경우에 있어서는 고로슬래그 미분말에 의한 강도회복효과가 매우 큰 것으로 나타났다. 따라서 동절기 초기재령에서 적절한 양생을 실시한다면, 한중콘크리트 제조시 고로슬래그 및 플라이애시와 같은 혼화재의 사용에 따른 콘크리트의 성능향상 효과가 매우 클 것으로 사료된다.

콘크리트의 강도와 재령을 고려한 응력-변형률 관계식의 개발 (Development of Stress-Strain Relationship Considering Strength and Age of Concrete)

  • 오태근;이성태;김진근
    • 콘크리트학회논문집
    • /
    • 제13권5호
    • /
    • pp.447-456
    • /
    • 2001
  • 그 동안 많은 연구자들은 콘크리트의 응력-변형률 관계의 비선형 거동을 적절한 수식으로 나타내기 위해 많은 노력을 해 왔다. 그러나 이 응력-변형률 관계에 대한 대부분의 경험식은 경화된 콘크리트에 촛점을 맞추어 왔으며, 초기재령에서의 콘크리트의 거동을 잘 나타내지 못하였다. 여기서 초기재령에서 경화시까지 걸친 전 콘크리트의 재령에 대한 폭 넓은 이해는 콘크리트구조물의 내구성과 잔존수명을 평가하는데 있어서 매우 중요하다. 본 논문에서는 5가지의 강도수준과 12시간에서 28일까지의 재령에 대하여 응력-변형률 관계를 검토하였으며, 20$\pm$3$^{\circ}C$ 에서 수중양생된 ø100$\times$200mm의 원주공시체에 대하여 1축압축강도실험을 수행했다. 실험결과에 대한 회귀분석을 수행하여 강도와 재령에 따른 응력-변형률 관계의 모델식을 제시하였으며, 제시된 모델식의 검증을 위하여 실험결과와 기존의 실험결과와 모델식에 대한 해석적 검토도 수행하였다. 해석결과, 제시된 모델식이 실험결과와 잘 맞으며 응력-변형률 관계에 강도와 재령이 미치는 영향을 잘 나타내고 있음을 알 수 있었다.

적산온도 기반의 무선센서 네트워크(CIMS)를 이용한 현장타설 슬래브 및 벽체 콘크리트의 압축강도 추정 (Prediction of Strength Development of the Slab and Wall Concrete at Jobsite Applying Wireless Sensor Network (CIMS) based on Maturity)

  • 김상민;신세준;서항구;김종;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 봄 학술논문 발표대회
    • /
    • pp.23-24
    • /
    • 2020
  • In this study, the concrete compressive strength estimation system Concrete IoT Management System (hereinafter referred to as CIMS) was developed, and CIMS was applied to domestic field structure slabs and wall concrete to check whether CIMS is practically available and to estimate the accuracy of the initial strength estimation of concrete. As a result, it shows a very high correlation when the compressive strength of the specimen for structural management is compared with the estimated strength of CIMS in terms of integrated temperature, and it is expected to be gradually applied to domestic construction sites in the future.

  • PDF

옻나무 경사핑거접합재의 휨강도와 AE 특성 (The Bending Strength and Acoustic Emissions Properties of Sloped Finger-Jointed Rhus Verniciflua)

  • 변희섭;김사익
    • 한국가구학회지
    • /
    • 제10권2호
    • /
    • pp.73-78
    • /
    • 1999
  • This paper describes the relationship between the bending strength properties of sloped finger-jointed woods and the acoustic emissions(AEs) generated during the test. Rhus verniciflua pieces were cut in sloped-finger types and glued with three kinds of adhesives(polyvinyl acetate, polyvinyl-acryl acetate and oilic urethane resin). The slope ratios of finger joints were 0, 1.0, 1.5, and 2.0. The AE cumulative event count and cumulative count were measured during the bending test. The results were as follows: The lower the bending strength(load) was, the generation time of AE event count got and the higher the increasing rate of AE event count became in the sloped finger-jointed specimens bonded with polyvinyl acetate, polyvinyl-acryl acetate oilic urethane resin adhesives. Therefore, the slope from load-AE cumulative event count was very steep. The patterns of AE event count and count were very similar. The relationship between the MOR and the AE parameter from load and AE cumulatve event count in the early stage of the sloped finger-jointed specimens bonded with polyvinyl acetate, polyvinyl-acryl and oilic urethane resin adhesives was much greater than that between the MOE and the MOR. Therefore, the AE signals obtained during bending test are useful for estimating the strength of sloped finger-jointed Rhus verniciflua specimens.

  • PDF

Economic and Fast-track Rehabilitation of Concrete Pavements and Bridge Decks

  • Ramseyer, Chris;Chancellor, Brent;Kang, Thomas H.K.
    • International Journal of Concrete Structures and Materials
    • /
    • 제2권2호
    • /
    • pp.107-113
    • /
    • 2008
  • The last 10 years have seen considerable growth in the use of proprietary and special repair cements for concrete pavements in the state of Oklahoma. Many of these products lend themselves to "fast track" construction techniques that allow reopening to traffic within 12 hours or less. These products achieve high early strengths by accelerating the Portland cement hydration process for both Type I and Type III cements. In this paper, the important features of a durable repair which include strength, compatibility and bond or adhesion are first discussed. Then the development, testing and field implementation of the aforementioned materials are discussed including the learning curve required to implement a repair system, not just install a new material. Some of the materials discussed, while expensive on a cost per unit basis, hold great promise for economical use on fast track project.

매스부재를 고려한 고강도콘크리트의 수화발열상승속도 조절에 따른 자기수축 특성 (Properties of Autogenous Shrinkage according to Hydration Heat Velocity of High Strength Concrete Considering Mass Member)

  • 구경모;김규용;홍성현;남정수;신경수;길배수
    • 한국건축시공학회지
    • /
    • 제12권4호
    • /
    • pp.369-376
    • /
    • 2012
  • 본 연구에서는 초기재령에 있어 매스부재를 고려한 고강도콘크리트에 대해 수화발열상승속도를 저감시키기 위한 방안의 일환으로 열흡수성능이 있는 상전이물질을 사용하였다. 또한 수화발열상승속도의 조절에 의한 고강도콘크리트의 자기수축 특성 변화를 분석하고자 하였다. 그 결과, 상전이물질은 시멘트 수화반응을 촉진함으로서 초기재령에 빠른 응결시간과 높은 압축강도 발현을 나타냈다. 또한 수화열 및 수화발열상승속도를 저감시키고, 자기수축량을 감소시키는 결과를 나타내었다. 이를 통해 초기재령의 수화발열상승 속도의 조절에 의해 자기수축량의 저감이 가능하다고 판단된다.