• 한국대기환경학회지
• /
• 제23권3호
• /
• pp.265-276
• /
• 2007

The primary objective of this study is to investigate the effect of media on the performance of biofilters. Two types of experiments were carried out in this study. The first type of experiment used a biofilter with the media composed of three different packing materials of compost, peatmoss and GAC(granular activated carbon), whereas the second type used a biofilter with the media composed of compost only. It was found from the two experiments that the biofilter composed of compost, peatmoss and GAC showed better performance than the one composed of compost only with the higher toluene removal efficiency, lower pressure drop, and more uniform media moisture content. In particular, no appreciable media compression occurred for the biofilter composed of compost, peatmoss and GAC, whereas significant media compression took place in the biofilter composed of compost only. As suggested by the other researchers, it is likely that GAC may be responsible for the higher toluene removal efficiency in the case of the biofilter composed of mixed media especially for the early stage of biofiltration due to its adsorption capability of toluene of such high concentration as 300 ppm. It was also regarded that GAC may playa major role in maintaining lower media pressure drop in the case of the mixed media than the media with compost only because of its mechanical strength resisting to the compression. Nonetheless, further refined experiments may need to draw more accurate conclusion. The results of the additional test run using the same mixed media showed that the biofilter system using the mixed media can be consistently operated for more than 100 days very stably despite sudden change in operating conditions of temperature and flow rate.

• Journal of Forest and Environmental Science
• /
• 제25권2호
• /
• pp.111-118
• /
• 2009

Multiple shoot induction and plant regeneration using apical bud and nodal explants of 100 year old tree of Anthocephalus cadamba, an important sacred and medicinal tree in India was achieved for the first time. Aseptic explants cultured in Murashige and Skoog (MS) medium augmented with different concentrations of BAP (0.1, 0.5, 1.0, 2.5, 5.0 and 10 mg/l), when maintained for 60 days, healthy shoots were induced in presence of BAP (1 mg/l). Lower concentrations of BAP (0.1 - 0.5 mg/l) induced only one shoot per explant. Increase in number of shoots per explant was observed in presence of higher concentrations of BAP (2.5, 5.0 and 10 mg/l). However, elongation of shoots was completely inhibited. Bud break and shoot regeneration was largely associated with seasonal factors. Apical buds cultured during June to August exhibited early bud break within two weeks of initial culture. In rest of the months, bud break and shoot regeneration was very slow irrespective of the various concentrations of BAP used in the medium. Explants sourced from three different maturity levels of shoots indicated that actively growing shoots from the mother plant with 1 - 2 nodal segments was more suitable for culture initiation than the explants collected from mature shoots at dormant stage. Regenerated shoots with 2 - 3 pairs of leaves when transferred to half strength MS medium fortified with IBA (1 mg/l), 60% of the shoots induced healthy roots, indicating the possibility of large scale micropropagation.

• 콘크리트학회논문집
• /
• 제23권2호
• /
• pp.225-233
• /
• 2011

콘크리트는 타설 직후부터 온도 및 수분의 변화로 인한 체적 변화가 일어난다. 특히 초기 재령에서 발생하는 온도 수축과 건조 수축은 콘크리트에 균열을 유발할 수 있으며, 이는 콘크리트 내구성에 큰 영향을 끼친다. 중국에서는 저온에서 소성된 산화마그네슘(MgO) 분말을 시멘트 대체재로 사용한 콘크리트를 구조물에 적용할 경우, 수축에 대한 보상 효과를 얻을 수 있는 것으로 보고된 바 있다. 이 연구에서는 실험을 통하여 저온 소성한 MgO를 혼입한 시멘트 복합체의 다양한 특성을 규명하고자 하였다. 안정성 시험 결과 MgO 분말의 혼입에 따른 이상팽창이 유발되지 않음을 확인하였으며, MgO의 수화생성물 분석을 통해 MgO 분말이 장기 재령에서 수축을 보상하는 것을 확인하였다. 또한 적당한 MgO 분말의 혼입은 시멘트 복합체의 압축강도를 증진시키는 효과가 있었으며, MgO 분말의 혼입률이 높거나 양생 온도가 높을수록 MgO 분말의 팽창성에 따른 수축 보완 효과가 크게 나타났다.

• 한국콘텐츠학회논문지
• /
• 제16권1호
• /
• pp.52-59
• /
• 2016

동절기에 타설되는 대부분의 콘크리트 구조물에서 가설 초기단계에서의 양생방법의 선정은 매우 중요한 요소이다. 동절기에는 초기균열과 강도저하를 방지하기 위하여 열선과 조강시멘트를 이용한 발열양생방법을 주로 적용하게 된다. 하지만 그 적용기법의 단순화 및 경험적 판단에의 의존으로 인하여 대부분의 건설현장에서 최적의 양생방법을 선정하지 못하고 있는 실정이다. 이에 따라 본 논문에서는 비정상상태의 열전달 해법을 통하여 가장 적절한 열선의 가열온도, 기간, 열선 배치간격을 선정하는 평가 알고리즘을 개발하였다. 이를 위하여 관리 매개변수에 주안점을 둔 구조해석 시스템을 통한 사용자 중심의 OOP 루틴을 적용하였다. 본 시스템에서는 입력모듈, DB 모듈, DB저장 모듈, 해석모듈 및 결과분석모듈로 구분하였으며, 각 모듈간의 연계는 visual c# 루틴으로 처리하였다. 또한 그래픽 인터페이스와 DB 테이블은 사용자 편의성을 고려하여 개발하였다.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.105-113
• /
• 2009

The performance of a direct-injection type diesel engine often depends on the strength of swirl or squish, shape of combustion chamber, the number of nozzle holes, etc. This is of course because the combustion in the cylinder was affected by the mixture formation process. In this paper, combustion process of biodiesel fuel was studied by employing the piston which has several grooves with inclined plane on the piston crown to generate swirl during the compression stroke in the cylinder in order to improve the atomization of high viscosity fuel such as biodiesel fuel and toroidal type piston generally used in high speed diesel engine. To take a photograph of flame, single cylinder, four stroke diesel engine was remodeled into two stroke visible engine and high speed video camera was used. The results obtained are summarized as follows; (1) In the case of toroidal piston, when biodiesel fuel was supplied to plunger type injection system which has very low injection pressure as compared with common-rail injection system, the flame propagation speed was slowed and the maximum combustion pressure became lower. These phenomena became further aggravated as the fuel viscosity gets higher. (2) In the case of swirl groove piston, early stage of combustion such as rapid ignition timing and flame propagation was activated by intensifying the air flow in the cylinder. (3) Combustion process of biodiesel fuel was improved by the reason mentioned in paragraph (2) above. Consequently, the swirl grooves would also function to improve the combustion of high viscosity fuel.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.1005-1008
• /
• 2008

본 연구에서는 시멘트의 대체재로써 고로슬래그를 사용한 무시멘트 알칼리 활성화 고로슬래그 콘크리트의 배합에 따른 기본적인 역학적 특성에 대해 파악하였다. 압축강도에 영향을 줄 수 있는 변수를 기존의 모르터 연구 및 예비 실험을 통해 설정한 후 배합하여 1, 3, 7, 28, 56, 91일의 압축강도를 측정하였다. 압축강도 실험에서 알칼리 활성 고로슬래그 콘크리트는 OPC(보통 포틀랜드 시멘트) 콘크리트에 비해 초기 강도가 빠르게 발현되었으며, 특히 1, 3일 강도는 OPC 콘크리트보다 약 $1.5{\sim}3$배 정도 높게 나타났다. 응력-변형률 관계에서는 알칼리 활성 고로슬래그 콘크리트는 최대 응력 이후에 변형률이 $0.0020{\sim}0.0025$에서 콘크리트의 파괴가 급격히 발생하였으며, 규산나트륨을 많이 첨가한 경우 고강도 콘크리트처럼 취성적 파괴를 보였다.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.168-174
• /
• 2005

Nowadays, the companies use polymer materials for many purposes fur they have many advantages. The costs of these materials take up too high a proportion of the overall cost of products that use these materials as their major material. It is advantage for polymer industries to reduce these costs. The microcellular foaming process was developed in the early 1980s to solve this problem and proved to be quite successful. Microcellular foaming process uses inert gases such as $CO_2,\;N_2$. As these gases solve into polymer matrices, many properties are changed. The microcellular foaming process makes the glass transition temperature of polymers to low, and diminish the residual stress of polymer matrices. Besides, the microcellular foaming process has several merits, impact strength elevation, thermal insulation, noise insulation, and raw material saving etc. In previous research, many facts of microcellular foaming process are founded its characteristics. But previous researcher found the characteristics of microcellular foaming process with pure gas, for example $CO_2,\;N_2$ and so on, they did not found the characteristics of microcellular foaming process with one more gases. If one more gases inlet the resin, the characteristics of microcellular foaming process is changed very amazingly. In this paper, discuss on the characteristics of microcellular foaming process wi th gas cocktail about cell morphology.

• 한국문헌정보학회지
• /
• 제16권
• /
• pp.71-110
• /
• 1989

The purpose of this study is to investigate the influential factors creating the modern library thought in the latter part of Yi Dynasty. After Korea was forced to make a treaty opening up the country in 1876, Western civilization was introduced and reforms were carried out eventually. Various influential factors could be taken into consideration as follows. (1) The envoys to Japan after 1876 (2) Tourists party to Japan organized by Gentlemen in 1982 (3) The persons who studied abroad (4) Establishment of modern schools and development of publications: on the new learning. (5) News media and others Above all, the persons who studied abroad, such as Yu Gil Jun, Yun Chi Ho, etc., in early stage has contributed most to the extension of public recognition for modern library in Korea. Therefore it can be said that the formation of modern library thought in Korea was based on the theory of the Western library as was the Japan in the period of Meiji Restoration. Patriotic intelectualls in these days believed that reform of the educational system and the diffusion of knowledge was very much meeded in order to preserve an independent Korea and to build up national strength, and then nation-wide campaign for enlightenment was earried on. For that reason the movement of the national library establishment in 1906 also should be regarded from the same point of view, that is, as a part of the enlightenment campaign. Therefore it should not go unheeded that strong patriotism was always streamed under the ground of the library campaign as well as the new learning and new education campaign. Unfortunately every plan of Korean library movement had broken down and missed the chance for having experience of self-development because of the Japanese invasion.

• 한국공간구조학회논문집
• /
• 제18권4호
• /
• pp.113-121
• /
• 2018

U-flanged truss beam is composed of u-shaped upper steel flange, lower steel plate of 8mm or more thickness, and connecting lattice bars. Upper flange and lower plate are connected by the diagonal lattice bars welded on the upper and lower sides. In this study the structural experiments on the U-flanged truss beams with various shapes of upper flange were performed, and the flexural and shear capacities of U-flanged truss beam in the construction stage were evaluated. The principal test parameters were the shape of upper flange and the alignment space of diagonal lattice bars. In all the test specimens, the peak loads were determined by the buckling of lattice bar regardless of the upper flange shape. The test results have shown that the buckling of lattice bar is very important design factor and there is no need to reinforce the basic u-shaped upper flange. However, the early lattice buckling occurred in the truss beam with upper steel bars because of the insufficient strength and stiffness of upper chord, and the reinforcement in the upper chord is necessary. The formulae of Eurocode 3 (2005) have presented more exact evaluations of lattice buckling load than those of KBC 2016.

• 정보보호학회논문지
• /
• 제17권3호
• /
• pp.55-67
• /
• 2007

Ad Hoc 네트워크 환경에서 노드 스스로가 자신의 공개키와 비밀키를 생성하고 이를 시스템 인증 권한자에 의해 서명 받는 자기 초기화(또는 자기 조직화)기법에서 어떻게 인증서를 발급할 것이냐 하는 것은 인증 권한자가 초기에만 네트워크에 존재하는 시스템에서 해결해야하는 중요한 문제 중에 하나이다. 이러한 문제를 해결하기 위해서 앞선 연구들은 자기 초기화 기법에 관련된 연구들에서는 시스템 인증 권한자 자체를 처음부터 시스템에서 없는 것으로 가정하였거나, 인증서를 획득한 노드가 다시 부분 인증 권한자가 되어 다른 노드들을 부분 서명해주는 인증 확산 방식을 사용하였다. 이 논문에서는 대리 서명과 임계 서명 기법을 사용하여 기존의 연구에서 나타났던 여러 문제를 해결하는 방법을 소개하며, 이를 모의실험 등의 방법을 통해 성능과 보안성에 대해서 살펴보았다.