• 제목/요약/키워드: vertical lift

검색결과 175건 처리시간 0.026초

운동이 안면두개골의 형태에 미치는 영향 (CRANIOFACIAL MORPHOLOGIC CHARACTERISTICS OF PROFESSIONAL SPORTSMEN)

  • 임은경;최영철
    • 대한소아치과학회지
    • /
    • 제30권4호
    • /
    • pp.563-575
    • /
    • 2003
  • 호흡기능 또는 근기능이 얼굴의 구조적 관계에 미치는 영향을 평가하고자 어려서부터 한가지 운동종목을 전공하여 온 체육대학 학생 137명을 운동의 유형에 따라, 지속적으로 심폐지구력이 많이 요구되는 운동군(1군), 심폐지구력이 많이 요구되기는 하나 1군보다는 적게 요구되는 운동군(2군), 그리고 순간적인 근력이 크게 요구되는 운동군(3군)으로 분류하고, 정모 및 측모 방사선사진을 계측학적으로 평가하여 다음과 같은 결론을 얻었다. 1. 머리너비길이지수는 모두 단두개에 속하였으며, 각 군간에 유의한 차이가 없었다(p>0.05). 2. 1군과 2군의 얼굴지수는 유의한 차이가 없었으나(p>0.05), 1군과 3군간, 2군과 3군간에는 현저한 차이가 있었다(p<0.05). 3. 얼굴지수와 높은 상관관계를 지닌 각 군의 계측항목은 전하안면높이(상관계수: $0.63{\sim}0.69$, p<0.001), 총안면높이, 전상치조높이, 전하치조높이 및 총안면두개높이 등이었다. 4. 3군의 두개계측치는 전상안면높이(상관계수: $0.36{\sim}0.55$, p<0.001) 및 전하안면높이(상관계수: $0.31{\sim}0.56$, p<0.001)와 높은 상관관계를 나타냈다. 5. 1군과 2군은 얼굴의 수직 계측치가 전반적으로 컸고, 3군은 수평 계측치가 크게 나타나는 경향을 보였다.

  • PDF

스마트 홈 서비스 로봇 맥봇II의 설계에 관한 연구 (A Study on Design of Smart Home Service Robot McBot II)

  • 김승우;김하이준
    • 한국산학기술학회논문지
    • /
    • 제12권4호
    • /
    • pp.1824-1832
    • /
    • 2011
  • 본 논문에서는 스마트 홈 서비스 로봇인 맥봇II(Mess-Cleanup Robot; McBot II)를 설계한다. 그것은 맥봇I에 비하여 더욱 지능적이고 실용적인 시스템으로 개발하였다. 지금까지 진공청소기는 가사 노동의 부담을 덜어주었지만 진공청소기를 운용하는 점에서 노동의 강도는 차이가 없다. 최근에 이 문제의 해결을 위해 상용화된 청소로봇이 나왔지만 큰 시장을 형성하지는 못했다. 왜냐하면 여전히 진공청소 이전에 큰 부피의 쓰레기나 신문, 옷가지 등을 정리정돈 하지 못하는 문제를 가지고 있다. 따라서 우리는 실제 환경에서 이 문제를 해결하기 위해 더 발전된 새로운 정리정돈 로봇 맥봇II를 개발한다. 특히, 본 논문에서는 로봇의 기계적인 설계와 기본적인 제어에 초점을 맞추어 논문을 구성한다. 맥봇II는 인간이 허리 및 손을 이용하여 정리 정돈 작업을 수행하는 메커니즘을 모델로 하여 설계되어 진다. 작업 시 인간의 허리 기능은 변화 범위가 큰 수직형 리프트와 전후진이 가능한 어깨 조인트 구조로 구현한다. 정리정돈 작업을 직접 수행하는 로봇 팔과 핸드는 실용성을 위하여 최소 자유도를 갖는 시스템으로 설계한다. 또한 맥봇II가 좁은 면적의 실내에서 장애물과의 충돌을 방지하면서 고속의 이동 능력을 갖기 위하여 홀로노믹(Holonomic)특성의 이동로봇으로 설계한다. 끝으로 최적화 설계로 구현된 로봇의 몸체/이동/로봇팔/핸드의 동작 제어 실험 결과들을 통하여 맥봇 II의 향상된 성능을 확인한다.

유도 맞잡기 타입에 따른 허벅다리걸기의 Kinematic 분석[I] (A Kinematic Analysis of Uchi-mata(inner thigh reaping throw) by Kumi-kata types in Judo)

  • 김의환;조동희;권문석
    • 한국운동역학회지
    • /
    • 제12권1호
    • /
    • pp.63-87
    • /
    • 2002
  • The purpose of this study was to analyze the kinematic variables when Uchi-mata(inner thigh reaping throw) performing by Kumi-kata(engagement position, basic hold) types A, B(A: grasping part-behind neck lapel, B: chest lapel) in Judo with three dimensional analysis technique DLT method by videography. The subjects were four male judokas who have been training in Yong-In University(YIU), on Korean Representative level and Uchi-mata is their tokui-nage(favorite technique), the throwing form was filmed on two S-VHS 16mm video camera( 30frame/sec. Panasonic). Kinematic variables were temporal, posture, and COG. The data collection was performing by Uchi-mata. Six good trials were collected for each condition (type A, B) among over 10 trials. The mean values and the standard deviation for each variable were obtained and used as basic factors for examining characteristics of Uchi-mata by Kumi-kata types. The results of this analysis were as follows : 1) Temporal variables The total time elapsed(TE) by Uchi-mata of types A, B were 1.45, 1.56 sec. respectively. Types A shorter than B. 2) Posture variables In performing of Uchi-mata, the range of flexion in type A, left elbow was $45^{\circ}$ and B was $89^{\circ}$ from Event 2(E2) to Event 6(E6). Type A and B were quite different in right elbow angle in Event1(E1). Left shoulder angle of type A was extended and type B was flexed in E4. Both types right shoulder angles were showed similar pattern. Also both hip angles(right/left) were showed similar pattern. When type A performed Uchi-mata the knee-angle of supporting foot showed $142^{\circ}$in the 1st stage of kake phase[KP], and extended to $147^{\circ}$in the 2nd stage of KP. And the foot-ankle angle of supporting foot showed $83^{\circ}$in the 1st stage of KP, and extended to $86^{\circ}$in the 2nd stage of KP. moreover, The knee angle of attacking foot showed $126^{\circ}$in the 1st stage of KP, and extended to $132^{\circ}$in the 2nd stage of KP, and the foot-ankle angle of attacking foot showed $106^{\circ}$in the 1st stage of KP, and extended to $121^{\circ}$in the 2nd stage of KP. When type B performed Uchi-mata the knee-angle of supporting foot showed $144^{\circ}$in the 1st stage of KP, and extended to $154^{\circ}$in the 2nd stage of KP. And the foot-ankle angle of supporting foot showed $83^{\circ}$in the 1st stage of KP, and extended to $92^{\circ}$in the 2nd stage of KP. moreover, The knee angle of attacking foot showed $132^{\circ}$in the 1st stage of KP, and extended to $140^{\circ}$in the 2nd stage of KP, and the foot-ankle angle of attacking foot showed $103^{\circ}$in the 1st stage of KP, and extended to $115^{\circ}$in the 2nd stage of KP. During Uchi-mata performing, type A showed pulling pattern and type B showed lift-pulling pattern. As Kumi-kata types, it were different to upper body(elbow, shoulder angle), but mostly similar to lower body(hip, knee, ankle angle) on both types. 3) C. O. G. variables When the subjects performed Uchi-mata, COG of type A, B up and down in vertical aspect was 71cm, 73.8cm in height from the foot in the 2nd stage of KP. As Kumi-kata types, it were different on medial-lateral direction aspect but weren't different in Kuzushi phase on vertical direction aspect.

안강망어법의 개량과 어장의 원해로의 확대를 위한 연구 - 1 . 어구의 모형실험 - (Study on the Improvement of Stow Net Fishing Technique and the Enlargement of Fishing Ground to the Distant Waters - 1 . Model Experiment of the Net -)

  • 이병기;김진건;이주희
    • 수산해양기술연구
    • /
    • 제24권2호
    • /
    • pp.55-64
    • /
    • 1988
  • 부산시 선적의 근해안강망 어선에서 사용하고 있는 어구의 1/10, 1/20 모형을 제작하여 흐름이 비교적 빠른 연안에서 전개상태를 측정 및 관찰한 결과는 다음과 같다. 1. 전개장치의 전개높이, 전개간극 등은 네갈랫줄의 상대적 길이에 따라 상당히 다르며, 보편적으로 사용하고 있는 바와 같이 네갈랫줄의 길이를 길게 하고, 맨 위쪽 줄의 길이를 그 보다는 짧게한 방식이 효과적이며, 가장 효과적인 것은 갈랫줄의 길이를 아래로부터 차례로 맨 아랫것 보다 5%, 9%, 4%씩 길게 한 것이 전개 높이, 전개간극, 전개면적 등의 모든 면에서 가장 효과적이었다. 2. 흐름이 빨라지면 등판과 밑판의 평면형상은 뜸줄과 발줄이 아주 심하게 만곡되고, 그물 길이의 2/5 정도까지는 망지가 뒤로 많이 쏠려서 망구에 있어서의 물의 여과를 혼란시켜 어군의 입망을 방해할 것 같고, 또 밑판이 해저의 장애물에 걸렸을 때는 파망의 우려가 크다. 3. 유체저항을 실물어구의 것으로 환산하면 R=29.2$\times$103 v1.65 이라고 표현되고, 이것을 그물의 설계상 구성요소를 고려한 식으로 바꾸면 R=5.9$\times$d/l$\times$abv1.65 이라고 표현된다.

  • PDF

칼슘포스페이트 나노-크리스탈이 코팅된 골이식재와 자가골을 병행 이용한 상악동 거상술 (SINUS FLOOR GRAFTING USING CALCIUM PHOSPHATE NANO-CRYSTAL COATED XENOGENIC BONE AND AUTOLOGOUS BONE)

  • 방강미;이보한;알라쉬단;유상배;성미애;김성민;장정원;김명진;고재승;이종호
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제31권3호
    • /
    • pp.243-248
    • /
    • 2009
  • Purpose: Rehabilitation of the edentulous posterior maxilla with dental implants often poses difficulty because of insufficient bone volume caused by pneumatization of the maxillary sinus and by crestal bone resorption. Sinus grafting technique was developed to increase the vertical height to overcome this problem. The present study was designed to evaluate the sinus floor augmentation with anorganic bovine bone (Bio-$cera^{TM}$) using histomorphometric and clinical measures. Patients and methods: Thirteen patients were involved in this study and underwent total 14 sinus lift procedures. Residual bone height was ${\geq}2mm$ and ${\leq}6mm$. Lateral window approach was used, with grafting using Bio-$cera^{TM}$ only(n=1) or mixed with autogenous bone from ramus and/or maxillary tuberosity(n=13). After 6 months of healing, implant sites were created with 3mm diameter trephine and biopsies taken for histomorphometric analysis. The parameters assessed were area fraction of new bone, graft material and connective tissue. Immediate and 6 months after grafting surgery, and 6 months after implantation, computed tomography (CT) was taken and the sinus graft was evaluated morphometric analysis. After implant installation at the grafted area, the clinical outcome was checked. Results: Histomorphometry was done in ten patients.Bio-$cera^{TM}$ particles were surrounded by newly formed bone. The graft particles and newly formed bone were surrounded by connective tissue including small capillaries in some fields. Imaging processing revealed $24.86{\pm}7.59%$ of new bone, $38.20{\pm}13.19%$ connective tissue, and $36.92{\pm}14.51%$ of remaining Bio-$cera^{TM}$ particles. All grafted sites received an implant, and in all cases sufficient bone height was achieved to install implants. The increase in ridge height was about $15.9{\pm}1.8mm$ immediately after operation (from 13mm to 19mm). After 6 months operation, ridge height was reduced about $11.5{\pm}13.5%$. After implant installation, average marginal bone loss after 6 months was $0.3{\pm}0.15mm$. Conclusion: Bio-$cera^{TM}$ showed new bone formation similar with Bio-$Oss^{(R)}$ histomorphometrically and appeared to be an effective bone substitute in maxillary sinus augmentation procedure with the residual bone height from 2 to 6mm.