• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 토목섬유기술위원회 학술세미나 논문집
• /
• pp.33-44
• /
• 2001

The generally known vertical drain methods for improvement of soft ground are Sand Drain, Sand Compaction Pile, Plastic Drain Board, and Pack Drain. Recently, Plastic Drain Board method application in soft ground is widely used. In this case study, it is compared with each other vertical drain methods from the results of monitorning and test embankment. The results of the analysis and the study show that Plastic Drain Board method is relatively acceptable as vertical drain method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1165-1172
• /
• 2006

In this study, an aspect of settlement, developed from different ground improvement method like suction drain method using vacuum pressure and vertical drain method using overburden pressure, was compared each other. In order to analyze settlement tendency of each method exactly, the finite element analysis program was used. The analyses of vertical settlement and lateral displacement for suction drain method and vertical drain method were conducted independently during the solving stage. The initial condition of drainage zone was fixed with 25m depth and 21m width. After the program analyses, the settlement condition had a different tendency with the ground improvement method. Especially, in the results of vertical drain method, the disparity of settlement between the middle of improved zone and unimproved zone. In the case of suction drain method, however, the difference of settlement was smaller than that of vertical drain method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1126-1131
• /
• 2009

Suction Drain Method is soft ground improvement technique, in which a vacuum pressure can be directly applied to the Vertical Drain Board to promote consolidation and strengthening the soft ground. This method does not require a surcharge load, different to embankment or vertical drain method. In this study, Using Suction-CAIN program, which optimize th Suction Drain method, estimate validity Suction Drain method on deep soft ground

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.373-382
• /
• 2007

In the vertical drain method, discharge capacity is generally one of the most important factor which affect on the estimation of the drain efficiency. However, adopting the drain considering discharge capacity only is not sufficiently considered method so that systematic criteria for adoption is necessary to choose the most suitable drain. Therefore, this study represents the application method considering behavior of the ground and vertical drain which is coupled together and ground improvement efficiency analyzing various cases of discharge capacity test performed in the recent soft ground improvement projects. According to the analysis, most drains tend to satisfy the required discharge capacity. It presents that deformed shape of the drains and well resistance estimation along the ground settlement, improvement efficiency by water content ratio along the depth and shear strength obtained after ground improvement should be considered altogether with the discharge capacity to select the proper drain. Also, appropriate adoption of drain material considering the ground condition is vital through analyzing the field measured data and comparing the result of the discharge capacity test as various vertical drain materials are being constructed continuously.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.692-701
• /
• 2009

The use of vertical drain method to improve the soft soil ground has been continuously increased in Korea such as Busan New Port, Saemangeum reclamation project and so on in Korea. Especially PBD(Plastic Board Drain), one of the vertical drain, has been widely used due to the economic feasibility, construction compatibility and quality control. However in case of using PBD, discharge capacity reduction caused by creep deformation of the PBD filter, bending, kinking and so on can be occurred. Therefore the purpose of this study is to solve these problems by developing Deformation-Compatible Vertical Drain, DCVD which allows to deform with consolidation settlement without bending and kinking of vertical drain. In order to investigate the performance of DCVD developed in this study, discharge capacity test, centrifuge model test and complex discharge capacity test for both PBD and DCVD are performed and the results are compared.

• 한국지반신소재학회논문집
• /
• 제9권2호
• /
• pp.11-20
• /
• 2010

본 연구에서는 국내에서 사용하고 있는 연직배수재의 통수능시험 평가방법과 국내 관련 시방기준들을 고찰하고 연직배수재통수능 시험시 결과에 영향을 미치는 인자로 동수경사 변화에 따른연직배수재의 통수능 시험 결과를 분석하였다. 국내 연직배수재의 통수능 평가시험방법으로 기존 Delft 방법에 근거한 KS K 0940(2008)이 최근 한국표준으로 등재되었으며, 이 시험방법을 사용하는 경우 동수경사의 변화에 따라 연직배수재의 통수능의 차이가 크게 나타날 가능성이 있는 것으로 확인되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1148-1154
• /
• 2006

Composite discharge capacity tests and smear effect tests are carried out to estimate the parameters for the reliability-based design of vertical drain method. Also the probabilistic and deterministic solutions of radial consolidation theory are presented. It compared to the result of reliability-based design and that of deterministic design using the tested and estimated parameters. The results indicated that the drain spacing is larger the deterministic method than the probabilistic method because the former is not considered the uncertainties in the properties of soil. The divergence of methods is dependent on the probability of achieving target degree of consolidation by a given time and the coefficient of variation(COV) of the coefficient of horizontal consolidation$(c_h)$.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1167-1174
• /
• 2008

Vertical drain method, which is one of the soft ground improvement methods, shorten s drain path to accelerate consolidation process and is applied in many sites. At a recent, composite discharge capacity experiment that analyze discharge amount by consolidation behavior with overburden pressure of soft ground in laboratory, simulates similarly with actuality. Geotechnical engineering problems such a s soft ground improvement are solved by numerical analysis by development of computer and numerical analysis techniques. Numerical analysis does that result is contrary by user's inexperience for choice of constitution model and application of analysis method. Therefore, this thesis experiments on composite discharge capacity test and study discharge capacity of drain and consolidation behavior of soft ground installed prefabricated vertical drain boards. Also, This thesis studied reasonable input parameters and constitution model by compare results of composite discharge capacity test and numerical analysis using PLAXIS that is 2D finial element numerical analysis program.

• 한국지반공학회논문집
• /
• 제27권4호
• /
• pp.77-87
• /
• 2011

이 연구에서는 실내에서 스미어가 발생한 지반을 모사하고 배수재 간격에 따른 스미어의 영향이 차후의 압밀거동에 미치는 영향을 분석하기 위하여 대형압밀챔버와 모형 맨드렐 관입 장비를 이용하여 다양한 압밀시험을 실시하였고 연직배수공법의 효율을 분석하였다. 실험결과 과압밀 영역에서는 스미어의 영향범위가 증가함에 따라 침하량도 증가하였으나, 정규압밀영역에서 스미어에 의한 침하량의 차이는 나타나지 않았다. 일반적으로 연직배수재를 설치한 경우 압밀속도를 향상시킬 수 있지만, 배수재 간격비가 감소하고 배수거리가 짧아지더라도 짧아진 배수거리만큼 압밀속도가 빨라지지는 않으며 오히려 압밀효율은 감소한다.

• 한국지반환경공학회 논문집
• /
• 제10권6호
• /
• pp.69-77
• /
• 2009

연약지반은 해성점토, 실트질, 사질토 등과 같은 지반으로 항만, 공항, 교량과 같은 구조물의 축조시 지지력 부족 및 침하, 전단변형 등의 문제점을 가진다. 이러한 문제점을 개선하고 연약지반의 조기 침하 및 강도증진을 위해 다양한 지반개량공법들이 적용되고 있으며 연약지반의 압밀에 소요되는 시간을 단축시키기 위해 연직배수공법이 많이 사용되고 있다. 특히, 연직배수공법에서 가장 많이 사용되는 배수재는 PBD(Plastic Board Drain)이다. 본 연구에서는 대심도 연약지반에 적용될 PBD공법에 대해 복합통수능실험을 실시하여 거동특성을 평가하였다. 그 결과, 상재압력의 증가에 따라 침하는 점진적으로 발생하였으며, 상재압력 $500kN/m^2$ 이후에는 간극수압의 소산에 따라 압밀침하가 진행되었다. 따라서 재하단계별 침하량의 변화는 간극수압의 소산에 따른 것임을 확인할 수 있었다. 또한, 연직 배수재의 통수능은 압력이 증가할수록 또 시간이 경과함에 따라 현저히 감소함을 알 수 있었다.