• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.101-104
• /
• 1968

The author has corrected the patient of severe deep overbites by means of occlusal rehabilitation. The satisfied results obtained as follows; 1. The loss of occlusal surface due to occlusal wear rehabilitated anatomically, biologically and mechanically. 2. Decreased occlusal vertical dimension restored 2mm without inpairments of condylar function. 3. The satisfied masticatory efficiency will be obtained by changing the free way space from 7mm to 2mm. 4. The healthiness of periodontal structures maintained with the aid of most equitable distribution of masticatory forces.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.27.1-27.1
• /
• 2009

In recent years, ZnO nanostructures have drawn considerable attentions for the development of futuristic electronic devices due to their superior structural and optical properties. As the growth of ZnO nanowires by MOCVD is a bottom-up technique, the nature of substrates has a vital role for the dimension and alignment of the nanowires. However, in the pursuit of next generation ZnO based nanodevices, it would be highly preferred if well-ordered ZnO nanowires could be obtained on various substrates like sapphire, silicon, glass etc. Vertically aligned nanowires were grown on A and C-plane sapphire substrates, where as nanopencils were obtained on R-plane sapphire substrates. In addition, C-axis oriented vertical nanowires were also found using an interfacial layer(aluminum nitride film) on silicon substrates. On the other hand, long nanowires were found on Ga-doped ZnO film on glass substrates. Structural and optical properties of the ZnO nanowires on various substrates were also investigated.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.1
• /
• pp.37-42
• /
• 2011

Partial edentulism has multiple implications in relation to function, esthetics and future rehabilitative treatment. This case report illustrates the management of a patient with extreme consequences of partial edentulism. The main clinical findings were unopposed remaining teeth, overeruption of the remaining teeth, loss of vertical dimension of occlusion, and significant disfigurement of the occlusal plane. Following the diagnostic procedure, a well-coordinated prosthodontic treatment involving liaison with other dental disciplines was indicated. The management involved an innovative combination of fixed and removable prostheses in conjunction with crown lengthening surgery and strategic implant placement. Series of provisional prostheses were applied to facilitate the transition to the final treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.599-604
• /
• 1994

Very few reports are available on the occurrence of abnormality of both enamel and dentin. This case has some characteristiced of both amelogenesis imperfecta and dentinogenesis imperfecta. Clinically, the enamel of primary dentition was completely absent and when the permanent teeth came to the pediatric dept. of Dankook University Dental Hopital for treatment. Fixed-removable type resin plate was delivered to increase vertical dimension and to solve esthetic and functional defects. Hypoplastic teeth were restored either stainless steel crown or composite resin restoration or both. The periodic recall check and oral hygiene education are recommended.

• Solar Energy
• /
• v.10 no.1
• /
• pp.38-46
• /
• 1990

For the optimal design and the efficient operation of the double pipe type latent heat storage equipment, the effect of the parameters of the system were analysed. The statistical analysis showed that the theoretical and the experimental results of the volume change rate and the temperature variations were well agreed. Therefore, this theoretical model is reasonable to analyze two dimensional moving boundary problems. In the analysis of the effects of the parameters, the heat extraction fraction and the water outlet temperature of the system as function of the time were analysed depending on the initial temperature of PCM, water inlet temperature, water mass flow rate and the dimension of the inner tube.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.379-384
• /
• 2009

A human gaze detection and tracing method is importantly required for HMI(Human-Machine-Interface) like a Human-Serving robot. This paper proposed a novel three-dimension (3D) human gaze estimation method by using a face recognition, an orientation estimation and SVMs (Support Vector Machines). 2,400 images with the pan orientation range of $-90^{\circ}{\sim}90^{\circ}$ and tilt range of $-40^{\circ}{\sim}70^{\circ}$ with intervals unit of $10^{\circ}$ were used. A stereo camera was used to obtain the global coordinate of the center point between eyes and Gabor filter banks of horizontal and vertical orientation with 4 scales were used to extract the facial features. The experiment result shows that the error rate of proposed method is much improved than Liddell's.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.385-388
• /
• 2001

In part forming process of metal matrix composites, the die casting and squeeze casting process are limited the size and dimension in term of final parts without machining. The thixoforming process for metal matrix composites has numerous advantages compared to die casting squeeze casting and compocasting. However, for the thixoforming process, the billet with the desired volume fraction must be heated to obtain a uniform temperature distribution over the entire cross-sectional areas. To obtain the reheating conditions of composites, the particulate reinforced metal matrix composites for thixoforming were fabricated by combined stirring process which is simultaneously performed with electro-magnetic stirring and mechanical stirring process.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.12 no.2
• /
• pp.31-38
• /
• 2003

Amelogenesis imperfecta patients suffered common clinical problems of poor esthetics, teeth sensitivity, and loss of occlusal vertical dimension. Amelogenesis imperfecta is a group of inherited disorders primarily affecting dental enamel. Variants of amelogenesis imperfecta generally classified hypoplastic, hypocalcified, or hypomaturation types based on the primary enamel defects. The mildest problems were found in the pitted hypoplastic type whereas the most severe problems were encountered in the hypocalcified type amelogenesis imperfecta. Management stragies include composite resin veneer and jacket crowns for anterior teeth as well as steel crowns for posterior teeth. Knowledge of the clinical features and dental complications of each variants if amelogenesis impecta helps in the diagnosis of the condition and allows institution of early preventive measures. The objective of this paper is to provide a review of the current concepts of the wide spectrum of etiological factors involved in the pathogenesis of this significance clinical entity in the primary dentition.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.372-379
• /
• 2004

The model tests were conducted to assess the behavior characteristics of geogrid reinforced earth walls according to various surcharge loads and reinforcement spacing. The models were built in the box having dimension, 100cm tall, 140cm long, and 100cm wide. The reinforcement used was geogrid(tensile strength 2.26t/m). Decomposed granite soil(ML) was used as a backfill material. The LVDTs were installed on the model retaining walls to obtain the displacements of the facing. In the results, the maximum displacement of facing and tensile strain of geogrid was measured at 0.7H(H is wall height) from the bottom of reinforced wall.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.161-165
• /
• 2001

Recently, mega-float offshore structure is studied as one of the effective utilization of the ocean space. And mega-float structure are now being considered for various applications such as floating airports, offshore cities and so on. This mega-float structure is relatively flexible compared with real floating structures like large ships. when we estimate dynamic responses of these structures in waves, the elastic deformation is important, because vertical dimension is small compared with horizontal. The analysis of the dynamic response as it receives regular wave is studied. The finite element method is used in the analysis of structural section of this model. And the analysis is carried out using the boundary element method in the fluid division. In order to know the characteristics of the dynamic response of the mega-float structures, effects of wavelength, water depth, and wave direction on dynamic response of the floating structure are studied by use of numerical calculation.