• Nuclear Engineering and Technology
• /
• 제44권5호
• /
• pp.551-560
• /
• 2012

The Wolsong-1 (W-1) Phase-B pre-simulations were carried out in preparation for tests to be conducted for the restart of the reactor after a major refurbishment project that included replacement of the pressure tube. These pre-simulations for Wolsong-1 Phase-B differ from those in the past that were performed for the Wolsong-1,2,3,4 tests in that these tests use the WIMS/DRAGON/RFSP-IST code suite for verification of the tests and gadolinium instead of the traditional PPV/MULTICELL/RFSP code system and boron as poison in the moderator system. The use of gadolinium is deemed not to have domestically accumulated experience gained from the previous Phase-B tests. Thus, it is appropriate to conduct a study in order to gain a correct understanding and interpretation of potential differences in test results stemming from using gadolinium rather than boron. Although the calibration of the reactivity device will not be noticeably different using boron and gadolinium at a constant moderator temperature, the temperature dependency of the neutronic behavior due to the presence of gadolinium in the moderator system might be pronounced. The results of the pre-simulations using gadolinium revealed that the moderator temperature reactivity coefficients indeed showed significant differences in comparison with those with boron. In order to secure the validity of the analysis results, the newly acquired WIMS/DRAGON/RFSP-IST code suite was verified against the W-2,3,4 Phase-B test results. The results of the new code suite verifications revealed some overall improvements in accuracy; justification of the use of the code can be claimed for the validation of the W-1 Phase-B test results.

• 한국지반공학회지:지반
• /
• 제13권1호
• /
• pp.5-18
• /
• 1997

일반적으로 포화지반의 동적거동을 정확히 예편하기 위해서는 다공성(multi-phase) 재료모델과 그 모델을 이용하는 수치해석 프로그램의 개발이 필요하다. 본 논문에서는 높은 동하중을 받는 다공질 재료의 이론적인 거동해석 연구결과와 함께 기존 MPDAP(multi-phase dynamic analysis program)에 JWL(Jones-Withins-Lee) 모델을 삽입시켜 개발한 MPDAP에 대해 다루었다. JWL모델은 기존 모델과는 달리 폭약의 종류 및 특성 등을 고려할 수 있는 모델이다. 또한 본 논문에서는 개발된 프로그램의 적합성을 조사하기 위하여 몇몇 예제에 대한 검증해석을 수행하였다. 검증결과, 단일매체 (single-phase medium)에서의 탄성구형파의 전파특성 해석의 경우 해석결과와 이론해는 거의 일치하는 결과를 나타내었고, 일차원 선형 압밀해석의 경우과잉 간극수압은 Terzaghi의 이론해와 해석된 결과가 비교적 일치하는 경향성을 보여 주었다. 또한 포화지반에서의 평면 압축파 해석의 경우도 해석결과와 이미 검증된 프로그램 또는 완전해의 해석결과는 거의 유사하게 나타나는 것을 알 수 있었다.

• 한국해양공학회지
• /
• 제26권2호
• /
• pp.48-57
• /
• 2012

This paper deals with numerical analyses in the context of estimations of hydrodynamic motions and dynamic loads for a floating type offshore platform using some exclusive simulation code such as code for the simulation of a floating type of offshore crane based on multi-body dynamics, along with the commercial code AQWA. Verifications of numerical models are carried out by comparing the RAO results from the simulation code. In the verification analyses, hydrodynamic motions are examined in the frequency domain for the floating type offshore platform according to the mooring lines. Both the hydrodynamic motions and dynamic loads are estimated for floating type offshore platforms equipped with the catenary type and taut mooring lines. A review and comparison are carried out for the numerically estimated results. The structural safety of the connection parts in an offshore structure such as a floating type offshore platform is one of the most important design criteria in view of fatigue life. The dynamic loads in the connecting area between a floating type offshore platform and its mooring lines are estimated in detail according to variations in the mechanical properties of the mooring lines. The dynamic tension load on the mooring lines is also estimated.

• 정보보호학회논문지
• /
• 제28권4호
• /
• pp.987-997
• /
• 2018

블록체인의 tamper-free 특성으로 많은 응용들이 개발되고 있다. MIT Media Lab 등은 기존 학력 증명의 진본 여부를 확인하는 절차의 복잡한 문제를 해결하기 위해서 블록체인 기반 디지털 졸업장 시스템을 개발하였다. 기존의 연구는 public blockchain 기반으로 원칙적으로 누구나 디지털 졸업장을 발급자가 될 수 있으나 이를 해결하기 위한 방법을 명확히 제시하고 있지 않다. 기존의 학력 증명 블록체인 시스템은 블록체인의 무결성을 활용하지만 개인정보가 다수 들어 있는 졸업장의 기밀성 문제를 해결하지 못하고 있다. 본 논문에서는 최초로 private blockchain 기반으로 HyperCerts라 명명된 디지털 졸업장 시스템을 제안한다. Private blockchain 기반이므로 신원이 확인된 신뢰할 수 있는 자만이 디지털 졸업장을 발급할 수 있으며 practical byzantine fault tolerance를 합의 알고리즘으로 이용하여 작은 컴퓨팅 파워를 필요로 하며 합의에 따른 지연이 매우 적은 장점이 있다. 디지털 졸업장은 민감한 개인정보를 포함한다. 따라서 디지털 졸업장의 privacy는 보장되어야 한다. HyperCerts는 디지털 졸업장의 hash값만 분산 원장에 저장하므로 악의적 노드의 참여로 인한 개인정보 유출 문제를 원천적으로 차단한다. 또한 디지털 졸업장은 암호화되고 OTP와 함께 제공되어 복호화 횟수 제한 등으로 디지털졸업장이 유출되었을 때 무분별한 복호화를 방지하도록 하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.111-121
• /
• 1999

From the traffic analyses, and model constructions and verifications for speed prediction on the freeway ramp junctions with 70mph speed limit, the following results obtained: ⅰ) The traffic flow distribution showed a big difference depending on the time periods. Especially, more traffic flows were concentrated on the freeway junctions in the morning peak period when compared with the afternoon peak period. ⅱ) The occupancy distribution was also shown to be varied by a big difference depending on the time periods. Especially, the occupancy in the morning peak period showed over 100% increase when compared with the 24hours average occupancy, and the occupancy in the afternoon peak period over 25% increase when compared with the same occupancy.ⅲ) The speed distribution was not shown to have a big difference depending on the time periods. Especially, the speed in the morning peak period shown 10mph decrease when compared with the 24hours' average speed, but the speed did not show a big difference in the afternoon peak period.ⅳ) The analyses of variance showed a high explanatory power between the speed predictive models(SPM) constructed and the variables used, especially the upstream speed. ⅴ) The analysis of correlation for verifying the speed predictive models(SPM) constructed on the ramp junctions were shown to have a high correlation between observed data and predicted data. Especially, the correlation coefficients showed over 0.95 excluding the unstable condition on the diverge sectionⅵ) Speed predictive models constructed were shown to have the better results than the HCM models, even if the speed limits on the freeway were different between the HCM models and speed predictive models constructed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.131-140
• /
• 1999

Today freeway is experiencing a severe congestion with incoming or outgoing traffic through freeway ramps during the peak periods. Thus, the objectives of this study is to identify the traffic characteristics, analyze the relationships between the traffic characteristics and finally construct the delay predictive models on the ramp junctions of freeway with 70mph speed limit. From the traffic analyses, and model constructions and verifications for delay prediction on the ramp junctions of freeway, the following results were obtained: ⅰ) Traffic flow showed a big difference depending on the time periods. Especially, more traffic flows were concentrated on the freeway junctions in the morning peak period when compared with the afternoon peak period. ⅱ) The occupancy also showed a big difference depending on the time periods, and the downstream occupancy(Od) was especially shown to have a higher explanatory power for the delay predictive model construction on the ramp junction of freeway. ⅲ) The speed-occupancy curve showed a remarkable shift based on the occupancies observed ; Od < 9% and Od$\geq$9%. Especially, volume and occupancy were shown to be highly explanatory for delay prediction on the ramp junctions of freeway under Od$\geq$9%, but lowly for delay predicion on the ramp junctions of freeway under Od<9%. Rather, the driver characteristics or transportation conditions around the freeway were through to be a little higher explanatory for the delay perdiction under Od<9%. ⅳ) Integrated delay predictive models showed a higher explanatory power in the morning peak period, but a lower explanatory power in the non-peak periods.

• 농촌계획
• /
• 제18권3호
• /
• pp.1-11
• /
• 2012

This study postulates a study model to examine the effect on the local economy revitalization of a selection of local resources, the local innovation capability strengthening, the establishment of promotion system and the creation of revenues for the participant groups of the local industry promotion project. To accomplish study purposes, 169 response samples from 85 project groups which drive the local industry promotion project were verified using SPSS 12.0 and AMOS 5.0. The results showed that firstly, the selection of local resources had a significant effect on the local innovation capability strengthening. Secondly, the local innovation capability strengthening had a significant effect on the establishment of promotion system. Thirdly, the establishment of promotion system had a significant effect on the creation of revenues. Fourthly, the selection of local resources didn't have an effect on the revitalization of local economy. Fifthly, both the local innovation capability strengthening and the establishment of promotion system didn't have an effect on the revitalization of local economy. Sixthly, the creation of revenues had a significant effect on the revitalization of local economy. According to the verifications of study model, the revitalization of local economy is achieved by inducing creation of revenues through the local innovation capability strengthening and the establishment of promotion system after the selection of local resources. From these results, this study presents suggestions, limits of study and directions in the future study.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권5호
• /
• pp.56-67
• /
• 2012

In the present study, an enhanced subsurface prediction algorithm based on a non-parametric geostatistical model and a history matching technique through Gibbs sampler is developed and the iterative prediction improvement procedure is proposed. The developed model is applied to a simple two-dimensional synthetic case where domain is composed of three different hydrogeologic media with $500m{\times}40m$ scale. In the application, it is assumed that there are 4 independent pumping tests performed at different vertical interval and the history curves are acquired through numerical modeling. With two hypothetical borehole information and pumping test data, the proposed prediction model is applied iteratively and continuous improvements of the predictions with reduced uncertainties of the media distribution are observed. From the results and the qualitative/quantitative analysis, it is concluded that the proposed model is good for the subsurface prediction improvements where the history data is available as a supportive information. Once the proposed model be a matured technique, it is believed that the model can be applied to many groundwater, geothermal, gas and oil problems with conventional fluid flow simulators. However, the overall development is still in its preliminary step and further considerations needs to be incorporated to be a viable and practical prediction technique including multi-dimensional verifications, global optimization, etc. which have not been resolved in the present study.

• Nuclear Engineering and Technology
• /
• 제45권3호
• /
• pp.323-334
• /
• 2013

During a hypothetical core-disruptive accident (CDA) in a sodium-cooled fast reactor (SFR), degraded core materials can form roughly conically-shaped debris beds over the core-support structure and/or in the lower inlet plenum of the reactor vessel from rapid quenching and fragmentation of the core material pool. However, coolant boiling may ultimately lead to leveling of the debris bed, which is crucial to the relocation of the molten core and heat-removal capability of the debris bed. To clarify the mechanisms underlying this self-leveling behavior, a large number of experiments were performed within a variety of conditions in recent years, under the constructive collaboration between the Japan Atomic Energy Agency (JAEA) and Kyushu University (Japan). The present contribution synthesizes and gives detailed comparative analyses of those experiments. Effects of various experimental parameters that may have potential influence on the leveling process, such as boiling mode, particle size, particle density, particle shape, bubbling rate, water depth and column geometry, were investigated, thus giving a large palette of favorable data for the better understanding of CDAs, and improved verifications of computer models developed in advanced fast reactor safety analysis codes.

• 비파괴검사학회지
• /
• 제36권1호
• /
• pp.53-59
• /
• 2016

초음파 비선형 진단을 이용한 기법의 경우 재료의 단순 결함 검출뿐만 아니라 부식, 소성변형과 같은 미세손상을 평가할 때 주로 이용된다. 1차 조화파(primary wave)와 2차 조화파(second harmonic wave)의 진폭의 비를 이용하여 비선형성을 나타내며, 이러한 비선형성의 비교 결과를 진단에 사용한다. 실험 특성상 비선형성은 재료의 비선형성뿐만 아니라 장비의 비선형성 또한 포함하게 된다. 장비 비선형성은 사용자가 측정하고자 하는 값이 아니므로 오차로 작용하여 분석을 방해한다. 본 연구에서는 오차로 작용하는 장비의 비선형성을 감소시켜 보다 정확한 진단을 위해 체적파 혼합기법을 사용하였다. 체적파 혼합기법의 가장 큰 특징은 기존의 초음파 비선형 진단보다 장비의 비선형성을 줄일 수 있다는 점이다. 본 연구에서는 체적파 혼합기법을 이론 및 실험적으로 검증하였으며, 기존의 초음파 비선형 진단기법의 결과와 체적파 혼합기법의 결과를 비교하여 장단점 및 적용 가능성 분석에 초점을 두었다.