• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권1호
• /
• pp.32-39
• /
• 2014

Traveling wave generation in a ring type stator has been studied. The basic working principle to create traveling wave has been modelled by the superposition of two orthogonal standing waves. Theoretical analysis shows that the length to radius ratio affects the frequency gap between two pseudo orthogonal modes used to create traveling wave. FEM simulation is then discussed and applied to validate the analytical model. At last, a possible optimal solution is reported with FEM verification.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.449-455
• /
• 2013

When a missile is launched, a fracture-type canister cover should be properly broken by a collision with a missile or inner pressure of a canister. The fracture performance of a canister cover should be evaluated by a test using a real missile; however, it is unrealistic due to high cost and time restriction in a design stage. In this study, a test technique is newly developed to predict fracture performance of a canister cover. The test was design to have same kinetic energy with a real missile test when the cover is collide with a missile. The effectiveness of the suggested test technique was proved by comparing the test result with that of a real missile test.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.189-190
• /
• 2015

This paper investigates an economic and highly efficient power converter topology and its modulation scheme for 60kW rapid EV charger system. The target system consists of three-phase three-switch buck-type rectifier topology. A new Carrier Based PWM scheme along with its simple implementation using logic gates is introduced in this paper. This PWM scheme replaces the diode rectifier equivalent switching state with an active switching state producing the effectively same current flowing path. As a result, the distortion of input current during the polarity reversal of capacitor line voltage can be mitigated. The proposed modulation technique is confirmed through simulation verification. The proposed modulation technique and its implementation scheme can expand the operation range of the three-phase three-switch buck-type rectifier having ac input and capacitor ripple current of high quality.

• Journal of Mechanical Science and Technology
• /
• 제20권6호
• /
• pp.770-781
• /
• 2006

This paper defined design constraints for the compound CVTs (continuously variable trans-missions) by combining power-circulation-mode CVTs and power-split-mode CVTs, which were proposed for connecting 2K-H I-type differential gear to V-belt-type CVU (Continuously Variable Unit). The design constraints are the necessary and sufficient conditions to avoid geometrical interferences among elements in the compound CVTs, and to guarantee smooth assembly between the power-circulation-mode CVT and power-split-mode CVT Two com-pound CVTs were designed and manufactured in accordance with the design constraints. With these compound CVTs, theoretical analysis and performance experiments were conducted. The results showed that the design constraints were valid and effective design method, and that the designed compound CVTs had the improved performance.

• 실천공학교육논문지
• /
• 제15권2호
• /
• pp.419-427
• /
• 2023

In this study, optimal adhesion conditions to alleviate defects caused by heat shrinkage with FDM type 3D printers with machine learning are researched. Machine learning is one of the "statistical methods of extracting the law from data" and can be classified as supervised learning, unsupervised learning and reinforcement learning. Among them, a function model for adhesion between the bed and the output is presented using supervised learning specialized for optimization, which can be expected to reduce output defects with FDM type 3D printers by deriving conditions for optimum adhesion between the bed and the output. Machine learning codes prepared using Python generate a function model that predicts the effect of operating variables on adhesion using data obtained through adhesion testing. The adhesion prediction data and verification data have been shown to be very consistent, and the potential of this method is explained by conclusions.

• 시스템엔지니어링학술지
• /
• 제20권spc1호
• /
• pp.76-89
• /
• 2024

This study investigates the impact of standardized underground logistics conainers on lower body muscle activation during warehouse tasks, comparing conventional roll containers(A type) with newly developed ones(B type). Through a detailed experimental setup involving electromyography(EMG) and tensiomyography(TMG), muscle activities of the lower limbs were quantitatively analyzed during loading unloading and transporting tasks. Results indicated no significant difference in muscle activation patters between the two rolltainer types, suggesting that the dimensions of these containers do not critically affect the muscular strain and workload. Furthermore, the TMG analysis revealed that muscle contraction velocity(Vc) increased in certain muscles when using the B-type rolltainer, indicating a potential for more efficient muscle engagement without increasing fatigue. This research underscores the importance of ergonomic considerations in the design of logistics equipment and suggests that further studies should focus on optimizing the interaction between human operators and logistical systems to enhance safety and efficiency in warehouse operations.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.30-37
• /
• 2007

The injection and spray characteristics of top-feed type injector was investigated under liquid phase injection fueled with liquefied petroleum gas (LPG). Different pressures and temperatures of fuel injection system were tested to identify the injection characteristics after hot soaking. MIE-scattering technique was used for verification of successful liquid phase injection after hot soaking. In case of bottom-feed type injector, the injection was accomplished at every experimental condition. In case of top-feed type injector, when the pressure of LPG was over 1.2 MPa, the injection was not executed. However, under the pressure were 1.2 MPa, the liquid phase injection after hot soaking was accomplished. The engine with top-feed type fuel injection equipment was restarted successfully after hot soaking.

• 한국분무공학회지
• /
• 제15권2호
• /
• pp.83-93
• /
• 2010

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feedwater heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare degree of shell wall thinning mitigation rate to squared type with mitigation rate of other type baffle plate, four different types of impingement baffle plate-squared, curved, mitigating type and multi-hole type-applied inside the shell. With these comparison data, this paper describes operation of experiments and numerical analysis which is composed similar condition with real feed water heater. And flow visualization is operated for verification of experiments and numerical analysis. In conclusion, this study shows that mitigating type and multi-hole type baffle plate are more effective than other baffle plate about prevention of pressure concentration and pressure value decrease.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.219-222
• /
• 2017

본 연구에서는 음성 사용자 인터페이스가 적용된 시스템 사용 중 오류가 발생했을 때 제공되는 피드백이 시스템에 대한 사용자의 평가에 어떠한 영향을 줄 것인지에 대해 알아보았다. 피드백 유형(확인 피드백, 정교화 피드백)과 오류 유형(인식 실패, 수행 실패)을 독립 변수로 하고 사용자의 주관적 평가와 피드백 수용성, 향후 이용 의도를 종속 변수로 하는 요인설계 실험연구를 진행하였다. 이원 다변량 분산분석을 한 결과, 피드백 유형만 사용자의 주관적 평가와 피드백 수용성, 향후 이용의도에 영향을 미치는 것으로 나타났다. 또한, 피드백 수용성에 대해 피드백 유형과 오류 유형의 상호작용 효과가 발견되었다. 따라서 VUI 설계 시, 오류 정보를 자세히 알려주는 피드백을 제공하는 것을 고려해 볼 수 있을 것이다.

• 한국방재안전학회논문집
• /
• 제15권3호
• /
• pp.67-77
• /
• 2022

국내에서는 I형 거더의 장경간화를 위한 수단으로써 U형 거더 개발을 시도하였으나, 포스트텐션 긴장방식에 따라 큰 자중으로 인하여 30 m이하 철도교 적용 사례가 대표적이며, 도로교는 시공 편의성과 보급성 논리에 따라 U형 거더의 적용 사례는 많지 않다. 본 연구는 이러한 포스트텐션 방식에 제한을 두지 않고 프리텐션 방식을 적용하여 단면 감소에 따른 자중 감소와 사용재료 절감을 유도하고자 한다. 또한, U형 거더 내부 반력대를 이용한 현장 프리텐션 긴장방법을 적용하고자 한다. 프리스트레스트 콘크리트 U형 단면 거더 교량은 콘크리트 바닥판 슬래브와 합성단면으로 구성된다. 단면이 폐합되어 개방형 단면인 PSC I형 대비 저항 강성 등의 구조적 성능향상과 제작 및 가설 단계에서 시공의 안전성 증대, 그리고 자중 경감에 기인하는 형고비 감소와 교량의 미적 경관성 확보가 가능하여 매우 효율적이고 경제적인 교량이다. 이로 인하여 고품질의 공장제작 부재와 현장에서 일체 타설로 효율적인 시공이 가능할 것으로 기대된다. 본 논문에서는 프리텐션 현장 긴장 방식 소개 및 긴장을 위한 정착블럭의 해석적 성능 검증에 대한 내용을 수록하였다.