• 제목/요약/키워드: ventilating holes

검색결과 7건 처리시간 0.023초

통기성 상자 구조물에 대한 유한요소 해석 (Finite Element Analysis of a Ventilating Box Structure)

  • 박종민;권순구
    • Journal of Biosystems Engineering
    • /
    • 제27권6호
    • /
    • pp.557-564
    • /
    • 2002
  • Corrugated board is an efficient low-cost structure material fur the boxes that are widely used for transporting, storing and distributing goods. Corrugated board is also considered as an orthotropic because the principal material directions are the same as in paperboard. The purpose of this study was to elucidate the principal design parameters of ventilating box through the FEA on the various types of ventilating hole. From the viewpoint of the stress distribution and stress level, the optimum pattern and location of the ventilating hole were vertically oblong, and symmetry position with a short distance to the right and left from the center of front and rear panel. And, the optimum location and pattern of hand hole were a short distance to the top from the center of both side panels, and modified shape to increase the radius of curvature of both side in horizontal oblong. In general, the optimum pattern and location of both the ventilating hole and hand hole based on the FEM analysis were well verified by experimental investigation. It is suggested that decrease in compressive strength of the box could be minimized in the same ventilating hole area under the condition of the length of major axis of ventilating hole is less than 1/4 of box length, the ratio of minor axis/major axis is 113.5∼l/2.5, and number of the ventilating holes is even and symmetrical.

양파 간이저장시 통풍조건 및 통풍구 재료의 크기가 저장에 미치는 영향 (Effects of Ventilation Condition and Ventilating Hole Sizes to Improve Quality Onion(Allium cepu. L) under Room Temperature)

  • 이찬중;김희대;정은호;김우일;서전규
    • 한국식품저장유통학회지
    • /
    • 제8권4호
    • /
    • pp.356-361
    • /
    • 2001
  • 양파 간이저장시 노지야적에 의해 발생하는 부패를 감소시켜 망과의 안전저장을 위하여 조립식 간이하우스를 이용하여 통풍조건 및 통풍구 재료의 크기에 따른 저장성을 조사한 결과는 다음과 같다. 평균온도는 노지야적에 비해 강제통풍에서 0.3~3.6$^{\circ}C$높았고, 무통풍에 비해서는 1.4~8.2$^{\circ}C$가 낮았다. 그러나 처리간 유의차는 없었다. 상대습도는 통풍처리구에서 무통풍 및 노지야적에 비해 약간 높았다. 구중감소율은 노지야적에서는 2.5%, 무통풍에서는 2.9%, 자연통풍 2단에서는 3%, 강제통풍 2단에서는 4.3%였다. 8월 하순까지의 부패율은 자연통풍 2단 27.7%, 강제통풍 2단 25.4%,인데 비해 무통풍 34.6%, 노지야적 37.8%로 통풍처리구에서 부패가 적었다. 통붕구 재료의 크기가 클수록 평균기온은 조금 낮았고, 상대습도는 7월에 조금 높은 경향을 보이다가 8월 이후에는 차이가 거의 없었다. 통풍 파이프 표면의 풍속은 통풍구의 크기가 작을수록 강했으며, 부위별로는 중간부위가 양끝쪽보다 낮았다. 부패율은 75mm통풍구 17.9%, 100mm통풍구 15.3%, 125mm통풍구 14.1%로 통풍구 크기가 클수록 부패는 적었다.

  • PDF

원형 석굴암 상부구조의 장마철 결로 및 열전달 현상의 실험적 연구 (Experimental investigation of dew formation and heat transfer in the original upper structure of Sokkuram grotto)

  • 이진기;송태호
    • 설비공학논문집
    • /
    • 제11권5호
    • /
    • pp.588-597
    • /
    • 1999
  • Sokkuram grotto, a UNESCO cultural heritage in Kyongju Korea, was originally covered with crushed rocks over its dome with ventilating holes. The grotto was perfectly preserved for more than 12 centuries until the upper structure was replaced with a concrete dome in the early 20th century to protect from total collapse. Since then, heavy dew formed on the granite surface to seriously damage the sculptures until it was further remodeled with air-conditioning facilities in the 60s. It is considered that the original upper porous structure had a dehumidifying capability. This research is made to unveil the dehumidifying mechanism of the rock layer during the rainy season in that area. A rock layer and a concrete layer are tested in a temperature/humidity-controlled room. No dew formation is observed for the two specimen for continued sunny days or continued rainy days. However, heavy dew formed on the concrete surface for a sunny day after long rainy days. It is thought that the sun evaporates water on the ground and dew is formed at the surface as the highly humid air touches the yet cold concrete. On the contrary, no dew formation is observed for the rock layer at any time. Even in the above worst situation, air flows downward through the cool rock layer and moisture is removed before reaching inside. Temperature measurement, flow visualization, observation of dew formation and measurement of air velocity are made to verify the mechanisms.

  • PDF

운전석 에어백을 장착한 중형 트럭의 승객거동해석을 위한 유한요소 모델의 개발 (Development of a Finite Element Model for Studying the Occupant Behavior of a Mid-Size Truck with a Driver Side Airbag)

  • 홍창섭;오재윤;이대창
    • 한국정밀공학회지
    • /
    • 제17권4호
    • /
    • pp.220-225
    • /
    • 2000
  • This paper develops a finite element model for studying occupant behavior of a mid-size truck equipped with a driver side airbag. The developed model simulates an occupant behavior using PAM-CRASH/PAM-SAFE in super computer SP2. The model is developed based on a sled test. A 50% hybrid dummy III is used for measuring head and chest accelerations and femur loads, and major injury coefficients such as HIC, CA and femur load. Inferior components such as foot rest, seat, kneebolster, crash pad, etc. are roughly modeled and defined by a rigid material model. And contact type II is used for detecting a contact with dummy. Contact type II definition uses force-deflection relationship of each body Such components as steering column which directly affect on the occupant injuy are modeled in detail and defined by an elastic-plastic material model. Airbag cushion is modeled using rivet elements. Airbag cover groove is modeled using rivet elements. Airbag tether is modeled as nonlinear bar elements. Airbag model has two vent holes to ventilating the exploded gas. Airbag is folded close to the real airbag folding procedure, and folded cautiously in order not to have initial penetration. A vehicle pulse acquired from 31mph frontal barrier test is used as input signal for the simulation. The simulation conditions are tuned to the sled test ones. The measured dummy accelerations and major injury coefficients, and filmed dummy behavior and airbag inflation process using high speed camera are compared to the simulation results to verify the developed finite element model.

  • PDF

상품성 제고를 위한 고구마 수확 후 관리 및 출하기술 (Postharvest Handling and Marketing Management for Making High Salability of Sweetpotatoes)

  • Jeong, Byeong-Choon
    • 한국식품저장유통학회:학술대회논문집
    • /
    • 한국식품저장유통학회 2001년도 임시총회 및 제18차 학술발표회 발표논문초록집
    • /
    • pp.51-64
    • /
    • 2001
  • The qualities including taste of sweetpotato stored during the winter which can display in the spring market in Korea are affected by availability of storage for the roots. In order to make high storage availability of sweetpotato, the postharvest handlings should be done thoroughly from the moment of harvest until shipping them to the market. A lot of procedures that must be handled carefully for improving postharvest management are as follows; digging, trimming, gathering, putting in storage containers, carrying them from field to house, curing, storing, washing, drying, selecting marketable roots, packing and shipping to the market, etc.. Sweetpotatoes have a high moisture content, and a relatively thin and delicate skin, and are sensitive to chilling, so careless postharvest handling can lead to both quantitative and qualitative losses which may be extremely high in some circumstances. From now on research has concentrated on the improvement of postharvest conditions to increase yield and lower disease rates. Storage, which makes sweetpotatoes available through out the year, benefits both the producer and the consumer. Seven very important points must be needed in order to get the best quality marketable roots in the storing of sweetpotatos : $\circled1$The storage house must be clean and sanitary, $\circled2$The crop must be harvested before the first frost to avoid low-temperature injury, $\circled3$Particular care must be taken to avoid cutting, bruising, or other injuries of the sweetpotatoes during digging, picking up, grading, placing in containers, and moving to the storage house, $\circled4$Select sound, disease-free roots for storage $\circled5$Sweetpotatoes should be stored in properly stacked containers $\circled6$Cure immediately after harvest, preferably at 32∼33$^{\circ}C$ and 90 to 95 percent relative humidity for 4 to 7 days, After curing the temperature should be reduced to 13$^{\circ}C$ to 16$^{\circ}C$ by ventilating the storage with outside air. $\circled7$Store at 12$^{\circ}C$ to 14$^{\circ}C$ and a relative humidity of 80 to 85 percent. Storage houses should be located on suitable sites and should be tightly constructed and insulated so that temperature and humidity will be uniform. Sweetpotatoes are usually not washed and graded, and lately sometimes washed, graded, waxed, before being shipped to market. Consumer packaging of sweetpotatoes in paper boxes(10-15kg) or film bags is done mainly to aid marketing. The shelf life of washed roots in consumer packs in only 1 to 2 weeks. Weight loss of roots during marketing is much less in perforated film bags than in mesh and paper bags. Perforation of 0.8 to 1kg polyethylene bags with about six 6mm holes is essential ; to lower the internal relative humidity and avoid excessive sprouting, rooting, and dampness. Development and use of better postharvest handling with good storage facilities or marketing methods can minimize sweetpotate losses and has an effect of indirectly increasing productivity and farmer’s income.

국화과 기생초, 각시취 및 저먼캐모마일 새싹채소의 발아, 재배 및 저장에 미치는 환경요인 (Environment Factors for Germination, Growing and Storage of Sprout Vegetables of Coreopsis tinctoria Nutt., Saussurea pulchella (Fisch.) Fisch. and Matricaria recutica L.)

  • 이무열;신소림;장영득;이철희
    • 한국자원식물학회지
    • /
    • 제22권2호
    • /
    • pp.136-144
    • /
    • 2009
  • 기생초, 각시취 및 저먼케모마일의 종자를 $15{\sim}30^{\circ}C$에서 각각 명조건과 암조건으로 20일 동안 발아시킨 결과 기생초는 $15^{\circ}C$, 암조건에서 4일 후에 83.0%, 각시취는 $25^{\circ}C$, 명조건 20일 후에 51.7%, 저먼케모마일은 $25^{\circ}C$, 암조건에서 4일 후에 90.3%의 발아율을 보였다. 발아된 종자를 암조건에서 길이생장을 시킨 결과 기생초는 $30^{\circ}C$에서 5일, 각시취는 $25^{\circ}C$에서 6일, 저먼캐모마일은 $20^{\circ}C$에서 6일 재배하는 것이 좋을 것으로 생각되었다. 3종 모두 녹화처리시 길이생장이 감소하는 특징을 보였으나, 기생초와 각시취 새싹채소는 길이생장이 억제되는 대신 부피생장 이 왕성한 특징을 보였다. 녹화처리에 대한 생육반응은 각기 다르게 나타나 기생초는 녹화 3일, 각시취는 2일이 적합하였으며, 저먼케모마일은 녹화처리를 하지 않고 출하하는 것이 좋은 것으로 나타났다. 3종 모두 수확 후 밀봉되는 용기에 포장하는 것이 수분 감소량을 억제시키면서 오래 저장할 수 있는 것으로 나타났다. 그러나 종에 따라 온도와 통기구의 유무에 따른 수분 감소량 및 갈변 억제 등 품질 유지에 다양한 반응을 보이므로, 판매 형태 및 주기에 따라 저장환경을 달리하는 것이 좋을 것으로 생각된다.

홍만선의 '산림경제(山林經濟)'에서 본 조경식물 재배(종수법(種樹法))와 가꾸기(양화법(養花法)) (A Study on the Planting and Cultivate of Hong Man-Seon(1643~1715)'s 'Salimkyungjae (山林經濟, The Economy of Forest)')

  • 신상섭
    • 헤리티지:역사와 과학
    • /
    • 제44권3호
    • /
    • pp.18-43
    • /
    • 2011
  • 우리나라 최초의 농업과학기술 종합교본으로 평가되고 있는 홍만선(洪萬選 : 1643~1715년)의 편저, '산림경제'를 대상으로 추적한 조경 식물 관련 재배(종수(種樹))와 가꾸기(양화(養花))에 대한 연구 결과는 다음과 같다. 첫째, '산림'은 벼슬하지 않고 초야에 묻혀 즐기는 것이고, '산림경제'는 의향에 따라 꽃과 나무를 심고 새와 물고기를 기르는 것인데, 10년 계획으로 알맞은 나무를 심으면 봄에는 꽃을 볼 수 있고 여름에는 그늘을 즐길 수 있으며, 가을에는 열매를 먹을 수 있고 자산을 늘리는 방법임을 역설하고 있다. 특히, 꽃과 나무를 가꾸고 재배하기 위해서는 생태적인 특성을 잘 이해해야 한다는 중요성을 강조하고 있다. 둘째, 조선시대에 등장하는 식물의 출현 종은 초기에 비해 중기 이후 증가하는 경향이 뚜렷한데, '산림경제'에서 그 증가 경향을 추적할 수 있으며, 여기에 기술된 52종의 성상은 교목 31종, 관목 8종, 기타 3종, 초본 10종으로 분석되어 교목의 비중이 높게 나타나고 28종에 이르는 유실수 등 이용후생의 경향이 표출된다. 셋째, 식목 길일은 음력으로 정월이 가장 좋고(상시(上時)) 2월이 차선이며 3월이 가장 나쁜 시기(하시(下時))임을 제시하였다. 한편, 이식에는 숙토를 많이 붙여 분 뜨기 하고, 남쪽 가지를 원래 방향에 맞춰 심으며, 묻혔던 높이만큼 복토하여 버팀목을 세워야 함을 설명하였다. 또한, 1치 정도 깊이로 씨를 심으면 새순이 잘 나고, 꺾꽂이는 3월 상순에 손가락 굵기 만한 것을 골라 5치 길이로 심는 것이 좋다 하였다. 접붙이기는 싹이 틀 때가 좋고, 과일나무를 접붙일 때 남쪽으로 뻗은 가지를 쓰면 열매가 많이 달리며, 정월에 곁가지들을 전정하면 힘이 갈리지 않고 열매가 탐스러우며 굵어진다 하였다. 특히, 식재 적기를 음력 정월로 기술하고 있는 점을 감안할 때 오늘날 식재 적기 판단에 중요한 시사점을 준다 하겠다. 넷째, 꽃나무 가꾸기와 관련하여 분재는 정월이나 2월 거름흙을 주고 옮겨 심거나 씨를 뿌리는데, 꽃망울이 맺히면 거름 물을 주어 3~4월에 분을 올리는 것을 권장하였다. 말똥을 물에 섞어 꽃나무에 주면 일찍 꽃이 피고, 붉은 꽃을 희게 하려면 유황 연기를 이용하며, 화분은 반음지에 벽돌로 괴어 주는 것이 좋고, 석류 치자 동백 사계화 등은 꽃이 진 뒤 흙에 묻어주는 것이 좋다하였다. 꽃나무는 담 밑에 심으면 가지가 집 쪽으로 기울어지므로 자주 돌려놓아야 하고, 햇볕이 잘 드는 움 속에 씨앗을 갈무리하는데 출입구 겸 환기구를 남쪽으로 내서 화분 관리에 편하도록 해야 한다 하였다. 다섯째, 정월 초하룻날 닭이 울 때 횃불로 과수나무를 그을리면 잠복중인 벌레를 살충할 수 있고, 청명일 새벽에 볏짚을 매달아두면 모충(毛蟲)이 잠복소에 유인되며, 과수에 발생한 벌레는 유황가루로 구멍을 막아 질식시키거나 유황불로 훈연하는 방제법을 제시하고 있다. 한편, 토양조건과 관련하여 비옥토의 중요성을 언급하면서 건강한 식물을 키울 수 있고 병충해를 예방할 수 있는 최선의 방법임을 제시하고 있다.