• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.33-41
• /
• 1999

This paper presents a method of actively controlling the interior noise by a trim panel with hybrid feedforward-feedback control loop. The control technique is designed to minimize the vibration of panel whose motion is limited to that of a piston (out-of-plane motion). The hybrid controller consists of an adaptive feedforward controller in conjunction with a linear quadratic Gaussian (LQG) feedback controller. In order to maintain control performance of both persistent and transient disturbances, the feedback loop speeds up the adaptation rate of feedforward controller by improving damping capacity of secondary plant related with the adaptation rule. Numerical simulation and experimental result indicate that the hybrid controller is a more effective method for reducing the vibration of the panel (and therefore the interior noise) compared to using feedforward controller.

• International Journal of Aeronautical and Space Sciences
• /
• v.3 no.1
• /
• pp.74-85
• /
• 2002

The numerical experiment has been conducted to investigate the unsteady shock wave reflecting phenomena. The cell-vertex finite-volume, Roe's upwind flux difference splitting method with unstructured grid is implemented to solve unsteady Euler equations. The $4^{th}$-order Runge-Kutta method is applied for time integration. A linear reconstruction of the flux vector using the least-square method is applied to obtain the $2^{nd}$-order accuracy for the spatial derivatives. For a better resolution of the shock wave and slipline, the dynamic grid adaptation technique is adopted. The new concept of grid adaptation technique, which is much simpler than that of conventional techniques, is introduced for the current study. Three error indicators (divergence and curl of velocity, and gradient of density) are used for the grid adaptation procedure. Considering the quality of the solution and the numerical efficiency, the grid adaptation procedure was updated up to $2^{nd}$ level at every 20 time steps. For the convenience of comparison with other experimental and analytical results, the case of interaction between the straight incoming shock wave and a sharp wedge is simulated for various flow conditions. The numerical results show good agreement with other experimental and analytical results, in the shock wave reflecting structure, slipline, and the trajectory of the triple points. Some critical cases show disagreement with the analytical results, but these cases also have been proven to show hysteresis phenomena.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.5
• /
• pp.505-511
• /
• 2011

In this paper, we have developed an automatic velocity control system of a small-sized commercial treadmill (belt length of 1.2 m and width of 0.5 m) which is widely used at home and health centers. The control objective is to automatically adjust the treadmill velocity so that the subject's position is maintained within the track when the subject walks at a variable velocity. The subject's position with respect to a reference point is measured by a low-cost sonar sensor located on the back of the subject. Based on an encoder sensor measurement at the treadmill motor, a state feedback control algorithm with Kalman filter was implemented to determine the velocity of the treadmill. In order to reduce the unnatural inertia force felt by the subject, a predefined acceleration limit was applied, which generated smooth velocity trajectories. The experimental results demonstrate the effectiveness of the proposed method in providing successful velocity changes in response to variable velocity walking without causing significant inertia force to the subject. In the pilot study with three subjects, users could change their walking velocity easily and naturally with small deviations during slow, medium, and fast walking. The proposed automatic velocity control algorithm can potentially be applied to any locomotion interface in an economical way without having to use sophisticated and expensive sensors and larger treadmills.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.807-813
• /
• 2007

Settling velocity is one of major parameters determining algal biomass in water quality modeling. In this study, the settling velocity of phytoplankton was measured in reservoir and stream sites of the Nakdong River, Korea. Settling velocities of various phytoplankton species were determined by measuring algal cell biomass settled in a sedimentation cylinder. Mean settling velocities were $0.22m\;day^{-1}$ in reservoir sites and $0.33m\;day^{-1}$ in stream sites, which were relatively higher compared with other default values suggested by water quality models (e.g. $0.1m\;day^{-1}$ in CE-QUAL-W2). The lower settling velocity in reservoirs than in stream implies the adaptation of phytoplakton to low turbulence in lentic environments. Cyanobacteria showed lower settling velocity ($0.2m\;day^{-1}$) than diatoms ($0.3m\;day^{-1}$), and this phenomenon may have resulted from buoyancy mechanisms of cyanobacteria. Cell volume did not show a significant correlation with settling velocity in this study, implying that conformation factors of colonies or other factors had large effects on settling velocity of algal cells as well as cell size. The result of this study may suggest proper coefficients of settling velocity of phytoplankton in the calibration of water quality model.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.3 no.1
• /
• pp.55-64
• /
• 2002

Objectives : Acupuncture therapy is known as a effective method to CVA with paralysis. To make clear about effectiveness of acupuncture affecting to active and static postural adaptation for the patient with hemiparesis, we studied whether acupuncture changed ability of maintenance with one leg standing posture, and character of gait such as gait velocity, cadence, stride length, step length and base of support. Methods : This clinical study has been carried out with 10 cases of CVA patient with hemiparesis. We treated patients with acupuncture for 4 weeks, estimated each paralytic leg and well leg before 1st treatment and after last treatment, and compared the change of one leg with the other. To estimate the change of ability of static postural adaptation, we checked the time of duration with one leg standing posture. And about active postural adaptation, we used temporal distance gait analysis with Ink-Foot-Print method. Results and Conclusions : In static postural adaptation, paralytic leg significantly improved the duration with one leg posture. And In active postural adaptation with gait analysis, paralytic leg showed significant improvement in stride length and step length. Base of support and cadence were also significantly improved.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.143-152
• /
• 1994

The velocity trajectory profile of trolley is designed to minimize both swinging while transportation of load and the stop position error at the final stop position. This profile is designed to be automatically programmed by the digital control algorithm when the length of chain and the desired travel distance are given as a priori. Also, to minimize both swinging and the stop position error the anti-swing controller which improves poor damping characteristics of the crane and the stop position controller are employed. The experimentalresults of sequential adaptation of the velocity trajectory profile and these two controllers show that this control scheme has excellent control performance as compared with that of the uncontrolled crane system.

• Journal of Sensor Science and Technology
• /
• v.17 no.4
• /
• pp.317-324
• /
• 2008

This paper presents an optical doppler tomography(ODT) system using a speaker as a method to achieve depth measurement in a flowing sample. The use of the speaker provides easy implementation with a low cost. The nonlinear characteristics of the speaker has hindered its adaptation because it produces inconsistent fringe frequencies at different depths. This paper reports an adaptive algorithm to compensate the nonlinear characteristics, and could, resultantly, acquire the Doppler frequency shift caused by the sample. The experiment utilizes a flowing scattering particle solution in a capillary tube at a certain flow rate. The Doppler frequency profile over the lumen was calculated by using spectrogram method. and we obtained the velocity image of the sample.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.3
• /
• pp.361-368
• /
• 2012

This paper presents an approach on the design of a nonlinear controller to track a reference velocity for an air-breathing supersonic vehicle. The nonlinear control scheme involves an adaptation of propulsive and aerodynamic characteristics in the equations of motion. In this paper, the coefficients of given thrust and drag functions are estimated and they are used to approximate the equations of motion under varying flight conditions. The form of the function of propulsive thrust is extracted from a thrust database which is given by preliminary engine input/output performance analysis. The aerodynamic drag is approximated as a function of angle of attack and fin deflection. The nonlinear controller, designed by using the approximated nonlinear control model equations, provides engine fuel supply command to follow the desired velocity varying with time. On the other hand, the stabilization of altitude, separated from the velocity control scheme, is done by a classical altitude hold autopilot design. Finally, several simulations are performed in order to demonstrate the relevance of the controller design regarding the vehicle.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.25-28
• /
• 1987

Design procedure of adaptive controller with variable load condition is present and applied to velocity control of small, permanent magnet DC servo motor. The state feedback control scheme is adopted and Recursive Least Squares algorithm is used for parameter estimation. In order to reduce the time consuming. In the procedure of adaptation-gain tuning of state feedback controller, approximate curve fitting technique is applied to the relations between load condition and poles of the system, load condition and feedback gains. With this method, fast adaptation can be accomplished. It is shown that this procedure can be applied not only to variable load condition but also to variation of other system constants, for example variation of resistance and inductance etc.. Simulation results is present for both cases - variable inertia load, variable motor resistance to verify performance improvements. This design procedure produces an adaptive con troller which is feasible for implementation with microprocessor by reducing calculation time.

• Journal of Environmental Science International
• /
• v.18 no.3
• /
• pp.333-343
• /
• 2009

This study presents the analysis of an atmospheric flow around a single-doppler radar located in a pseudo-site. The use of a doppler radar in meteorological field of wind engineering has become widespread over the last several decades, but it has generally been recognized that the single-Doppler radar yields only one single velocity component - the radial velocity($V_r$) so that some additional hypotheses or simplifications must be necessary to get proper wind forecast. Therefore, in order to get an accurate radial velocity($V_r$) in this study, the existing methods such as VAD(Velocity Azimuth Display) and VARD(Velocity Area Display) are reformulated and applied to match the previous study(Waldteufel and Corbin), which have been an important indicator for retrieving a radar velocity. The results presented in this study include the results from different assessment methods in a peudo-site of different wind fields. Unless the existing method can consider the proper decomposition of radial velocity in the real site, then authors suggest an appropriate curve-fitting to decrease the uncertainty errors by changing a grid adaptation rate or applying a weighting function with respect to the wind angle. It is concluded that provided properly formulated fitting function are used, the wind retrieval from the Doppler radar using VAD and VARD methods can be a viable tool for use in wind engineering problems searching for the wind resources.