• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.5
• /
• pp.1662-1681
• /
• 2015

The efficient send and receive of information in VANET improves the efficiency of the safety and traffic services advertisment and discovery. However, if the V2V is the only communication system used, the restrictions of the urban environment and network drop the performance of VANET. In order to improve the performance of the network, it is necessary to use V2I communication as well as V2V communication. Therefore, RSUs must be placed in the environment. However due to the high costs of placement, the full coverage of the environment would not be possible. Therefore, it is necessary to optimally install a limited number of RSUs in the environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.12
• /
• pp.3416-3435
• /
• 2023

Task offloading in vehicular networks is hot topic in the development of autonomous driving. In these scenarios, due to the role of vehicles and pedestrians, task characteristics are changing constantly. The classical deep learning algorithm always uses a pre-trained neural network to optimize task offloading, which leads to system performance degradation. Therefore, this paper proposes a neural network fine-tuning task offloading algorithm, combining with location prediction for pedestrians and vehicles by the Payne model of fluid dynamics and the car-following model, respectively. After the locations are predicted, characteristics of tasks can be obtained and the neural network will be fine-tuned. Finally, the proposed algorithm continuously predicts task characteristics and fine-tunes a neural network to maintain high system performance and meet low delay requirements. From the simulation results, compared with other algorithms, the proposed algorithm still guarantees a lower task offloading delay, especially when congestion occurs.

• Journal of Information Processing Systems
• /
• v.7 no.2
• /
• pp.221-240
• /
• 2011

Vehicular networks are a promising application of mobile ad hoc networks. In this paper, we introduce an efficient broadcast technique, called CB-S (Cell Broadcast for Streets), for vehicular networks with occlusions such as skyscrapers. In this environment, the road network is fragmented into cells such that nodes in a cell can communicate with any node within a two cell distance. Each mobile node is equipped with a GPS (Global Positioning System) unit and a map of the cells. The cell map has information about the cells including their identifier and the coordinates of the upper-right and lower-left corner of each cell. CB-S has the following desirable property. Broadcast of a message is performed by rebroadcasting the message from every other cell in the terrain. This characteristic allows CB-S to achieve an efficient performance. Our simulation results indicate that messages always reach all nodes in the wireless network. This perfect coverage is achieved with minimal overhead. That is, CB-S uses a low number of nodes to disseminate the data packets as quickly as probabilistically possible. This efficiency gives it the advantage of low delay. To show these benefits, we give simulations results to compare CB-S with four other broadcast techniques. In practice, CB-S can be used for information dissemination, or to reduce the high cost of destination discovery in routing protocols. By also specify the radius of affected zone, CB-S is also more efficient when broadcast to a subset of the nodes is desirable.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.794-797
• /
• 2015

As the interest in VANET is increased, a study on the beacon message transmission between vehicles is actively being made. IEEE 802.11p/1609.4 standard is based on a multichannel system consisting of multiple service channels (SCH) and a control channel (CCH). Multiple SCHs are defined for nonsafety data transfer, while the CCH is used to broadcast safety messages called beacons and control messages (i.e., service advertisement messages). However, most messages broadcast in the only one CCH belong to safety application that must be contested in dense vehicular network. This paper suggests safety message transfer algorithm in dense vehicular congestion. The proposed algorithm is that the priority of safety messages is decided by decision tree and messages are stored in proper queues according to their priorities. Then, safety messages with higher priorities are sent in turn by CCH in the assigned time. The proposed algorithm decreases the beacon transmission delay and increase on the probability of a successful beacon reception in an IEEE 802.11p/1609.4-based network.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.423-434
• /
• 2007

Vehicular ad-hoc network (VANET), a kind of mobile ad-hoc network (MANET), is a key technology for building intelligent transportation system (ITS). VANET is automatically and temporarily established through vehicle-to-vehicle communication without network infrastructure. It has the characteristics that frequent changes of network topology and node density are occurred and messages are disseminated through several relay nodes in the network. Due to frequent change of network topology and node density, however, VANET requires an effective relay node selection scheme to disseminate messages through the multi-hop broadcast. In this paper, we propose a contention window based multi-hop broadcast scheme for VANET. Each node has an optimized contention window and competes with each other for a relay node. The experimental results show that the proposed scheme has a better performance than the distance-based deterministic broadcast scheme in terms of message propagation delay and network traffic.

• International Journal of Computer Science & Network Security
• /
• v.24 no.8
• /
• pp.139-144
• /
• 2024

VANETs have become one of the most attractive research areas in the world of wireless networks in recent years. Indeed, vehicular networks have become capable of optimizing road traffic, which significantly reduces the number of accidents through notifications exchanged between nearby vehicles. The routing function based on the opportunistic algorithm is a critical part of the vehicle's communication system and will therefore be an ideal target for attacks that could aim to prevent alert messages from reaching their destination, and thus endanger human lives. The black hole attack is a major threat to the security of VANETs. The main idea of this paper focuses on the analysis of this type of attack in VANETs using Discrete-Time Markov Chains (DTMC). and deduce at the end the effect of the number of malicious nodes on the delivery rate in the network.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.6
• /
• pp.35-41
• /
• 2010

The ubiquitous-transportation sensor network (u-TSN) system is a next generation transportation system that provides traffic information through analysis and processing periodic information from vehicles. In this paper, we propose the adequate transmission scheme from vehicles for collecting vehicular information. The conventional scheme is transmitting each vehicle information every 0.1s. A variable transmission period scheme is proposed in this paper according to vehicle speed. The proposed and conventional schemes are compared with computer simulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.624-627
• /
• 2014

In vehicular network, the basic goal is to provide vehicle safety service and commercial service such as ITS(Intelligent Transportation System) or video, etc on the road. And most research concentrated on transportation of safety message in congestion situation. It is important to allocate channel for safety message in congestion situation, but providing suitable service is also important problem in vehicular network. For this reason, IEEE 1609.4 allocate 4 multiple service channels (SCHs) for non-safety data transfer. But, in congestion situation with many vehicles, the contention for channel acquisition between services becomes more severe. So services are provided improperly because of lack of service channel. This paper suggests dynamic channel allocation algorithm. The proposed algorithm is that RSU(RaodSide Unit) maintain and manage the information about service and status of channels. On based of the SJF(Shortest Job First) scheduling using those information, RSU selects the most appropriate channel among the 4 SCHs allocated by IEEE 1609.4 in network congestion situation.

• Journal of Multimedia Information System
• /
• v.6 no.2
• /
• pp.61-66
• /
• 2019

VANET (Vehicular Ad-hoc Network) is a mobile Ad-hoc Network which deals with the moving vehicles. VANET supports Intelligent Transport Systems (ITS) which is related to different modes of transport and traffic management techniques. VANETs enabled users to be informed and make them safer. VANET uses IEEE 802.11p standard wireless access protocol for communication. An important and necessary issue of VANET is to design routing protocols. In a network, communication takes place by the use of the routing protocols. There are mainly two types of communications used such as Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I) in VANET. Vehicles can send and receive messages among them and also to and from infrastructure used. In this paper, AODV, DSR and DSDV are compared by analysing the results of simulation on various metrics such as average throughput, instant throughput, packet delivery ratio and residual energy. Findings indicates utilization of AODV and DSR is more applicable for these metrics as compared to DSDV. A network simulator (NS2) is used for simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.125-132
• /
• 2017

Vehicular safety service reduces traffic accidents and traffic congestion by informing drivers in advance of threats that may occur while driving using vehicle-to-vehicle (V2V) communications in a wireless environment. For vehicle safety services, every vehicle must broadcasts a Basic Safety Message(BSM) periodically. In congested traffic areas, however, network congestion can easily happen, reduce the message delivery ratio, increase end-to-end delay and destabilize vehicular safety service system. In this paper, to solve the network congestion problem in vehicle safety communications, we approximate the relationship between channel busy ratio and the number of vehicles and use it to estimate the total network congestion. We propose a new context-aware transmit power control algorithm which controls the transmission power based on total network congestion. The performance of the proposed algorithm is evaluated using Qualnet, a network simulator. As a result, the estimation of total network congestion is accurately approximated except in specific scenarios, and the packet error rate in vehicle safety communication is reduced through transmit power control.