• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1031-1046
• /
• 2018

Vehicular ad hoc network (VANET) is a dedicated network to connect vehicles without any centralized administration or infrastructure. The wireless access in vehicular environments (WAVE) protocol leveraging IEEE 1609/802.11p is widely implemented for VANETs. However, in congested traffic situation, the performance of the WAVE system degrades significantly due to serious collision, especially for safety related broadcast services on the control channel (CCH) interval due to the inherent drawback of its collision avoidance mechanisms called carrier sense multiple access with collision avoidance (CSMA/CA). In this paper, we propose a method that can decrease the number of frame collisions in CCH with a few modifications to the IEEE 802.11p protocol. In the paper, vehicles still employ CSMA/CA to compete for the channel access opportunity. However, by taking advantage of periodicity of synchronization interval, a two-state switching scheme introducing two new inter frame space (IFS) is proposed to reduce the number of competing vehicles substantially and as a result, the collision probability is significantly decreased. The simulation results demonstrate the superiority of the proposed method in packet collision rate.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.115-122
• /
• 2017

In vehicular safety service, every vehicle broadcasts Basic Safety Message (BSM) periodically to inform neighbor vehicles of host vehicle information. However, this can cause network congestion in a region that is crowded with vehicles resulting in a reduction in the message delivery ratio and an increase in the end-to-end delay. Therefore, it could destabilize the vehicular safety service system. In this paper, in order to improve the congestion control and to consider the hidden node problem, we propose a congestion control scheme using entire network congestion level estimation combined with transmission power control, data rate control and time slot based transmission control algorithm. The performance of this scheme is evaluated using a Qualnet network simulator. The simulation result shows that our scheme mitigates network congestion in heavy traffic cases and enhances network capacity in light traffic cases, so that packet error rate is perfectly within 10% and entire network load level is maintained within 60~70%. Thus, it can be concluded that the proposed congestion control scheme has quite good performance.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.749-752
• /
• 2005

In this paper, we introduce an Intersection Collision Avoidance (ICA) system as a convergence example of Telematics and USN technology and show several requirements for the ICA system. Also, we propose a system design that satisfies the requirements of reliable vehicular data acquisition, real-time data transmission, and effective intersection collision prediction. The ICA system consists of vehicles, sensor nodes and a base station that can provide drivers with a reliable ICA service. Then, we propose several technological solutions needed when implementing the ICA system. Those are about sensor nodes deployment, vehicular information transmission, vehicular location data acquisition, and intersection collision prediction methods. We expect this system will be a good case study applied to real Telematics application based on USN technology.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3837-3859
• /
• 2014

Vehicular Ad hoc Networks (VANET) becomes more popular in industry, academia and government. However, Typical VANET is challenged by high speed mobility and insufficient spectrum resources over congested scenarios. To address those serious problems, some articles have introduced Cognitive Radio (CR) technology into VANET and formed CR-VANET. In this article, we propose an overview of CR-VANET by exploring different architectures and features. Moreover, we provide taxonomy of state-of-the-art papers in this emerging field and the key articles are well analyzed respectively. In addition, we illustrate both research and application frameworks of CR-VANET based on our works, and propose some open research issues for inspiring future work.

• Journal of Information Technology Services
• /
• v.11 no.4
• /
• pp.195-213
• /
• 2012

In ubiquitous environments, the Intelligent Transportation System (ITS) protocol is a typical service used to improve the quality of life for humans. The Vehicular Ad-hoc Network (VANET) protocol, a part of ITS, needs further study with regards to its support for high reliability, high speed mobility, data transmission efficiency, and so on. The IEEE 802.11 standard provides a high data rate channel, but it was designed for peer-to-peer network protocols. IEEE 802.11p also provides a high data rate channel, however, it only facilitates communication between roadside and on-board equipment. A VANET has characteristics that enable its topology to change rapidly; it can also be expanded to a multi-hop range network during communication. Therefore, the VANET protocol needs a way to infer the current topology information relating to VANET equipped vehicles. In this paper, we present the Multi-Beacon MAC Protocol, and propose a method to resolve the problem of beacon collisions in VANET through the use of this Multi-Beacon MAC protocol. Evaluation of the performance of Multi-Beacon MAC protocol by means of both mathematical analyses and simulation experiments indicate that the proposed method can effectively reduce beacon collisions and improve the throughput and the delay between vehicles in VANET systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.187-194
• /
• 2012

Vehicular communication networking is one of the most important building blocks of Intelligent Transportation System(ITS). The vehicular communication network is a wireless communication system enabling vehicles to communicate with each other as well as with roadside base stations. Especially, Wi-Fi based vehicle-to-infrastructure(V2I) communication is an emerging solution to improve the safety, traffic efficiency, and comfort of passengers. In this paper, we proposed a new communication hub platform for vehicles, and explained vehicle communication technology in short. Through car simulation results, we show thar our proposed system reduces signaling interference.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.9-15
• /
• 2014

In the ubiquitous computing environment, a ubiquitous vehicle will be a communication node in the vehicular network as well as the means of ground transportation. It will make humans and vehicles seamlessly and remotely connected. Especially, one of the prominent services in the ubiquitous vehicle is the vehicle remote operation. However, mutual-collaboration with the in-vehicle communication network, the vehicle-to-vehicle communication network and the vehicle-to-roadside communication network is required to provide vehicle remote operation services. In this paper, an Internet-based human-vehicle interfaces and a network architecture is presented to provide remote vehicle control and diagnosis services. The performance of the proposed system is evaluated through a design and implementation in terms of the round trip time taken to get a vehicle remote operation service.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.2
• /
• pp.529-546
• /
• 2012

To address the need for autonomous control of remote and distributed mobile systems, Machine-to-Machine (M2M) communications are rapidly gaining attention from both academia and industry. M2M communications have recently been deployed in smart grid, home networking, health care, and vehicular networking environments. This paper focuses on M2M communications in the vehicular networking context and investigates areas where M2M principles can improve vehicular networking. Since connected vehicles are essentially a network of machines that are communicating, preferably autonomously, vehicular networks can benefit a lot from M2M communications support. The M2M paradigm enhances vehicular networking by supporting large-scale deployment of devices, cross-platform networking, autonomous monitoring and control, visualization of the system and measurements, and security. We also present some of the challenges that still need to be addressed to fully enable M2M support in the vehicular networking environment. Of these, component standardization and data security management are considered to be the most significant challenges.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.12-20
• /
• 2008

Recent wireless communication technologies are envisioned as an innovative alternative to solve transportation problems. On ad hoc networks, as a wireless communication technology, nodes can communicate data without any infrastructure. In particular, vehicular ad hoc networks (VANETs), a specific ad hoc network applied to vehicles, enable vehicles equipped with a communication device to form decentralized traffic information systems in which vehicles share traffic information they experienced. This study investigated traffic information dissemination in a VANET-based traffic information system. For this study, an integrated transportation and communications simulation framework was developed, and experiments were conducted with real highway networks and traffic demands. The results showed that it took 3 minutes in the low traffic density situations (10 vehicle/lane.km) and 43 seconds in the high traffic density condition (40 vehicle/lane.km) to deliver traffic information of 5km away with 10% market penetration rate. In uncongested traffic conditions, information seems to be disseminated via equipped vehicles in the opposite direction. In congested traffic conditions, the sufficient availability of equipped vehicles traveling in the same direction reduces the chance to use vehicles in the opposing direction even though it is still possible.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.93-101
• /
• 2008

With a spread of mobile devices, the growing trend of integrating wireless communications technologies into transportation systems is advanced. In particular, vehicular ad hoc networks (VANETs) enable vehicles to share traffic information that they have through intervehicle communications. This research focused on the design of an integrated transportation and communication simulation framework to build an environment that is more realistic than previous studies developed for studying VANETs. Developing a VANET-based information model, this research designed an integrated transportation and communication simulation framework in which these independent simulation tools not supporting High Level Architecture (HLA) were tightly coupled and finely synchronized. As a case study, a VANET-based traffic information system was demonstrated based on a real road network and real traffic data. The experiment results showed that the simulation framework was well integrated. The simulation framework designed in this study is expected to contribute to developing the environment to experiment a wide range of VANET applications.