• Journal of Korean Society of Disaster and Security
• /
• v.16 no.1
• /
• pp.105-113
• /
• 2023

Jeollanam-do has 25 land-to-island and island-to-island bridges, the largest number in Korea. It is a local government rich in specialized marine and tourism resources centered on the archipelago and the sea bridges connecting them. However, in the case of sea-crossing bridges, when strong winds or typhoons occur, there is an issue that increases anxiety among users and local residents due to excessive vibration of the bridge, apart from structural safety of the bridge. In fact, in the case of Cheonsa Bridge in Shinan-gun, which was recently opened in 2019, vehicle traffic restrictions due to strong winds and excessive vibrations frequently occurred, resulting in complaints from local residents and drivers due to increased anxiety. Therefore, based on the data measured using IoT measurement technology, it is possible to relieve local residents' anxiety about the safety management of marine bridges by providing quantitative and accurate bridge vibration levels related to traffic and wind conditions of bridges in real time to local residents. This study uses the existing measurement system and IoT sensor to constantly observe the wind speed and vibration of the marine bridge, and transmits it to local residents and managers to relieve anxiety about the safety and traffic of the sea-crossing bridge, and strong winds and to develop technologies capable of preemptively responding to large-scale disasters.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.1-10
• /
• 2023

This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.

• Korean Security Journal
• /
• no.21
• /
• pp.155-175
• /
• 2009

RFID that provide automatic identification by reading a tag attached to material through radio frequency without direct touch has some specification, such as rapid identification, long distance identification and penetration, so it is being used for distribution, transportation and safety by using the frequency of 125KHz, 134KHz, 13.56MHz, 433.92MHz, 900MHz, and 2.45GHz. Also it is one of main part of Ubiquitous that means connecting to net-work any time and any place they want. RFID is expected to be new growth industry worldwide, so Korean government think it as prospective field and promote research project and exhibition business program to linked with industry effectively. RFID could be used for access control of person and vehicle according to section and for personal certify with password. RFID can provide more confident security than magnetic card, so it could be used to prevent forgery of register card, passport and the others. Active RFID could be used for protecting operation service using it's long distance date transmission by application with positioning system. And RFID's identification and tracking function can provide effective visitor management through visitor's register, personal identification, position check and can control visitor's movement in the secure area without their approval. Also RFID can make possible of the efficient management and prevention of loss of carrying equipments and others. RFID could be applied to copying machine to manager and control it's user, copying quantity and It could provide some function such as observation of copy content, access control of user. RFID tag adhered to small storage device prevent carrying out of item using the position tracking function and control carrying-in and carrying-out of material efficiently. magnetic card and smart card have been doing good job in identification and control of person, but RFID can do above functions. RFID is very useful device but we should consider the prevention of privacy during its application.

• Korean Security Journal
• /
• no.61
• /
• pp.285-305
• /
• 2019

In the bill of [Act on Certified Detective and Certified Detective Business] (hereinafter referred to as the Certified Detective Act) proposed and represented by the member of National Assembly, Lee Wan-Yong in 2017, the legislative point of view showed that various incidents and accidents, including new crimes, are frequently increasing as society develops and becomes more complex, however, it is not possible to solve all the incidents and accidents with the investigation force of the state alone due to manpower and budget, and therefore, a certified detective or private investigator are required. According to the decision of the Constitutional Court in June 2018, Article 40 (4) of the Act on the Use and Protection of Credit Information is concerned with 'finding the location and contact information of a specific person or investigating privacy other than commerce relations such as financial transactions' are prohibited. It is for the purpose of preventing illegal acts in the process of investigation such as the location, contact information, and the privacy of a specific person and protecting the privacy and tranquility of personal privacy from misuse and abuse of the personal information etc. Such 'privacy investigation business' currently operates in the form of self-employment business, which becomes a social issue as some companies illegally collect and provide such privacy information by using illegal cameras or vehicle location trackers and also comes to be the objects of clampdown of the investigative agency. Considering this reality, because it is difficult to find a resolution to materialize the legislative purpose of the Act on the use and protection of credit information other than prohibiting 'investigation business including privacy etc' and it is possible to run a similar type of business as a detective business in the scope that the laws of credit research business, security service business, the position of the Constitutional Court is that 'the ban on the investigations of privacy etc' does not infringe the claimant's freedom to choose a job. In addition to this decision, the precedent positions of the Constitutional Court have been that, in principle, the legislative regulation of a particular occupation was a matter of legislative policy determined by the legislator's political, economic and social considerations, unless otherwise there were any special circumstances, and. the Constitutional Court also widely recognized the legislative formation rights of legislators in the qualifications system related to the freedom of a job. In this regard, this study examines the problems and improvement plans of the certified detective system, focusing on the certified detective bill recently under discussion, and tries to establish a legal basis for the certified detective and certified detective business, in order to cultivate and institutionalize the certified detective business, and to suggest methodologies to seek for the development of the businesses and protect the rights of the people.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.82-94
• /
• 2008

Airport GIS is a comprehensive information system to improve security and efficiency of airport. At the initial stage to make it real, the current status of domestic and international regulations along with relevant standardization bas been reviewed. Gimpo Airport becomes a test-bed to get some ideas about how to bring the airport GIS into workflow by building service model and basic design based on current status and demand analysis of the airport. The 6 service models primarily brought into the project are as follows: (1) Local vehicles safety management in airside, (2) Intelligent traffic control between flights and vehicles at main cross points, (3) Dynamic safety management against FOD in airside and breakage on pavement, (4) Special support vehicle management such as deicing remotely controlled, (5) Response and support for fire vehicles and ambulances of signatory institutions in emergency. The upcoming research topic aims at drawing a specific design and building integrated system in the future.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2090-2100
• /
• 2011

Railway rail fastening system is the critical device which gives big influences to not only the vehicle driving stability and the orbit's structural stability against the impulsive load, but also the noise vibration and the ride comfort. As a part of the low-carbon green growth, the importance of the railroad industry is getting highlights on its excellent energy-efficiency and eco-friendliness. However, so far the Korea's domestic rail fastening system technology is not so good and the technical reliance to abroad is very heavy. In this study, we conducted comparative analysis on the rail fastening system with new and used one of the same type. And those systems are imported by Seoul Metro and are being used by it. With this basis, we developed the components and the materials and then, established the durability assessment methods appropriate to the Korean domestic circumstances. And through the reliability qualification test on the 7 parts of the rail fastening system, we've improved the reliability and guaranteed the 15 years of service lifetime. ($B_{10}Life15$) Establishment and standardization of Reliability Standard on the parts of the rail fastening system such as anti-vibration pads, guide-plate, screw spike made it possible to perform the internationally fair assessment. And it is thought that we can satisfy the manufactures' and consumers' needs of cost-cutting and qualification security by shortening of assessment period on rail fastening system.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.1-10
• /
• 2001

Speech has a good characteristics of which car drivers busy to concern with miscellaneous operation can make use in convenient handling and manipulating of devices. By utilizing this, this works proposes a speaker verification method for protecting cars from being stolen and identifying a person trying to access critical on-line services. In this, continuant phonemes recognition which uses language information of speech and MLP(mult-layer perceptron) which has some advantages against previous stochastic methods are adopted. The recognition method, though, involves huge computation amount for learning, so it is somewhat difficult to adopt this in speaker verification application in which speakers should enroll themselves at real time. To relieve this problem, this works presents a solution that introduces speaker cohort models from speaker verification score normalization technique established before, dividing background speakers into small cohorts in advance. As a result, this enables computation burden to be reduced through classifying the enrolling speaker into one of those cohorts and going through enrollment for only that cohort.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.55-62
• /
• 2014

FTSR(Flight Termination System Receiver) is a device that receives a ground command signal to abort a flight mission when abnormal conditions occur in the space launch vehicle. The secure tone command message shall consist of a series of 11 character tone pattern. Each character consists of the sum of two tones which taken from a set of 7 tones defined by IRIG(Inter-Range Instrumentation Group) in the audio frequency range. The MHA(Modified High alphabet) command adds a security feature to the secure tone command by using the predefined difference code. In order to check the function and performance of MHA FTSR, which is under development, for KSLV-II, the testbed should have functions of RF signal generation, receiver's output port monitoring, RS-422 communication and test data management. In this paper, we first briefly introduce MHA command and FTSR interface, and then show the LavVIEW based testbed include its H/W configuration, S/W implementation and test results.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.252-263
• /
• 2016

Road sign is an important street furniture that gives some information such as road conditions, driving direction and condition for a driver. Thus, road sign is a major target of image recognition for self-driving car, ADAS(autonomous vehicle and intelligent driver assistance systems), and ITS(intelligent transport systems). In this paper, an enhanced road sign recognition system is proposed for MMS(Mobile Mapping System) using the single camera and GPS. For the proposed system, first, a road sign recognition scheme is proposed. this scheme is composed of detection and classification step. In the detection step, object candidate regions are extracted in image frames using hybrid road sign detection scheme that is based on color and shape features of road signs. And, in the classification step, the area of candidate regions and road sign template are compared. Second, a Geo-marking scheme for geo-content that is consist of road sign image and coordinate value is proposed. If the serious situation such as car accident is happened, this scheme can protect geographical information of road sign against illegal users. By experiments with test video set, in the three parts that are road sign recognition, coordinate value estimation and geo-marking, it is confirmed that proposed schemes can be used for MMS in commercial area.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.83-90
• /
• 2020

Disasters are causing significant damage to the lives and property of our society and are recognized as social problems that need to be solved nationally and globally. The 4th industrial revolution technologies affecting society as a whole such as the Internet of Things(IoT), Artificial Intelligence(AI), Drones(Unmanned Aerial Vehicles), and Big Data are continuously absorbed into the disaster and safety industries as scientific and technological tools for solving social problems. Very soon, twenty-nine domestic UAV-related organizations/companies will complete the construction of a multicopter type small UAV integrated system ('17~'20) that can be operated at disaster and security sites. The current work considers and proposes the mid-to-long term R&D direction of disaster UAV as a strategic asset of the national disaster response system. First, the trends of disaster and safety industry and policy are analyzed. Subsequently, the development status and future plans of small UAV, securing shortage technology, and strengthening competitiveness are analyzed. Finally, step-by-step R&D direction of disaster UAV in terms of development strategy, specialized mission, platform, communication, and control and operation is proposed.