• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.399-400
• /
• 2010

산업의 발전과 경제성장을 바탕으로 대한민국의 자동차 등록수는 매년 꾸준한 증가세를 보이고 있다. 이와 더불어 자동차 사고 또한 급격히 증가하고 있다. 대한민국은 OECD회원국중 교통사고 발생건수가 높은 편이고 사망자수 또한 상위에 랭크되어 있다. 이러한 사망자 수는 각 나라별 교통사고 발생건수 대비 사망자수와 비교시 높은 사망률을 보이고 있다. 또한 자동차 충돌 사고에서 빈번히 발생되는 운전자의 의식불명에 따른 초기 응급조치의 미흡, 뺑소니 또는 사고 후 방치되는 상황을 방지하기 위해 차량용 블랙박스와 사고발생 통보 시스템이 필요하다. 본 논문에서는 가속도센서를 이용하여 사고 발생시 충격 임계점을 계산한 후 사고 발생을 블루투스를 이용하여 스마트폰으로 전송한다, 또한, 교통사고 발생 후 환자의 응급 후송 및 2차 교통사고를 방지하기 위한 시스템의 필요성에 따라 블랙박스를 접목한 차량용 응급상황 감지 및 통보 시스템을 설계 및 구현하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.531-534
• /
• 2022

승차 공유, 카풀, 렌터카의 이용률이 증가하면서 많은 사용자가 동일한 차량에 로컬 액세스 할 수 있는 시나리오가 더욱 보편화됨에 따라 차량 네트워크에 대한 공격 가능성이 커지고 있다. 차량용 CAN Bus Network에 대한 DoS(Denial of Service), Fuzzy Attack 및 Replay Attack과 같은 공격은 일부 ECU(Electronic Controller Unit) 비활성 및 작동 불능 상태를 유발한다. 에어백, 제동 시스템과 같은 필수 시스템이 작동 불가 상태가 되어 운전자에게 치명적인 결과를 초래할 수 있다. 차량 네트워크 침입 탐지를 위하여 많은 연구가 진행되고 있으나, 기존 화이트리스트를 이용한 탐지 방법은 새로운 유형의 공격이 발생하거나 희소성이 높은 공격일 때 탐지하기 어렵다. 본 논문에서는 인공신경망 기반의 CAN 버스 네트워크 침입 탐지 기법을 제안한다. 제안하는 침입 탐지 기법은 2단계로 나누어 진다. 1단계에서 정상 패킷 분포를 학습한 VAE 모형이 이상 탐지를 수행한다. 이상 패킷으로 판정될 경우, 2단계에서 인코더로부터 추출된 잠재변수와 VAE의 재구성 오차를 이용하여 공격 유형을 분류한다. 분류 결과의 신뢰점수(Confidence score)가 임계치보다 낮을 경우 학습하지 않은 공격으로 판단한다. 본 연구 결과물은 정보보호 연구·개발 데이터 첼린지 2019 대회의 차량 이상징후 탐지 트랙에서 제공하는 정상 및 3종의 차량 공격시도 패킷 데이터를 대상으로 성능을 평가하였다. 실험을 통해 자동차 제조사의 규칙이나 정책을 사전에 정의하지 않더라도 낮은 오탐율로 비정상 패킷을 탐지해 낼 수 있음을 확인할 수 있다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.701-702
• /
• 2020

본 논문에서는 Jetson-Nano와 데스크탑에서 OpenCV와 YOLOv3 실시간 객체 인식 알고리즘을 이용하여 웹캠을 통해 주차장 등의 출입 차량 인식 통계 시스템을 개발하였다. 최근 에지컴퓨팅에 관심이 증가하고 있는 시점에서 Nvidia사에서 개발하여 보급하고 있는 Jetson-Nano에 YOLOv3 tiny와 OpenCV를 이용하여 차량인식을 수행하고, 구글에서 개발한 오픈 소스 Tesseract-OCR을 이용해 차량번호인식하여 입출차 혹은 주차시 차량정보를 확인할 수 있다. 딥러닝 학습 알고리즘에서 전기차 번호판의 특징점을 인식하여 전기차를 판별하여 일반차량이 전기차 주차구역에 불법주차하는 것을 모니터링할 수도 있다. 출입한 차량 데이터 베이스에서 입출차 시각, 차량번호, 전기차여부등이 확인 가능하다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.465-466
• /
• 2022

본 논문에서는 딥러닝 영상인식 기술을 활용한 객체검출 모델인 YOLOv4를 활용하여 차량의 모델과 번호판인식 시스템을 제안한다. 본 논문에서 제안하는 시스템은 실시간 영상처리기술인 YOLOv4를 사용하여 차량모델 인식과 번호판 영역 검출을 하고, CNN(Convolutional Neural Network)알고리즘을 이용하여 번호판의 글자와 숫자를 인식한다. 이러한 방법을 이용한다면 카메라 1대로 차량의 모델 인식과 번호판 인식이 가능하다. 차량모델 인식과 번호판 영역 검출에는 실제 데이터를 사용하였으며, 차량 번호판 문자 인식의 경우 실제 데이터와 가상 데이터를 사용하였다. 차량 모델 인식 정확도는 92.3%, 번호판 검출 98.9%, 번호판 문자 인식 94.2%를 기록하였다.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.9
• /
• pp.361-368
• /
• 2014

The LPR(License plate recognition) system has been developed to efficient control for complex traffic environment and currently be used in many places. However, because of light, noise, background changes, environmental changes, damaged plate, it only works limited environment, so it is difficult to use in real-time. This paper presents a heuristic segmentation algorithm for robust to noise and illumination changes and introduce a real-time license plate recognition system using it. In first step, We detect the plate utilized Haar-like feature and Adaboost. This method is possible to rapid detection used integral image and cascade structure. Second step, we determine the type of license plate with adaptive histogram equalization, bilateral filtering for denoise and segment accurate character based on adaptive threshold, pixel projection and associated with the prior knowledge. The last step is character recognition that used histogram of oriented gradients (HOG) and multi-layer perceptron(MLP) for number recognition and support vector machine(SVM) for number and Korean character classifier respectively. The experimental results show license plate detection rate of 94.29%, license plate false alarm rate of 2.94%. In character segmentation method, character hit rate is 97.23% and character false alarm rate is 1.37%. And in character recognition, the average character recognition rate is 98.38%. Total average running time in our proposed method is 140ms. It is possible to be real-time system with efficiency and robustness.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.71-91
• /
• 2018

In recent years, application of UAV(Unmanned Aerial Vehicle) to seed sowing and pest control has been actively carried out in the field of agriculture. In this study, UAS(Unmanned Aerial System) is constructed by combining image sensor of various wavelength band and SfM((Structure from Motion) based image analysis technique in UAV. Utilization of UAS based vegetation survey was investigated and the applicability of precision farming was examined. For this purposes, a UAS consisting of a combination of a VIS_RGB(Visible Red, Green, and Blue) image sensor, a modified BG_NIR(Blue Green_Near Infrared Red) image sensor, and a TIR(Thermal Infrared Red) sensor with a wide bandwidth of $7.5{\mu}m$ to $13.5{\mu}m$ was constructed for a low cost UAV. In addition, a total of ten vegetation indices were selected to investigate the chlorophyll, nitrogen and water contents of plants with visible, near infrared, and infrared wavelength's image sensors. The images of each wavelength band for the test area were analyzed and the correlation between the distribution of vegetation index and the vegetation index were compared with status of the previously surveyed vegetation and ground cover. The ability to perform vegetation state detection using images obtained by mounting multiple image sensors on low cost UAV was investigated. As the utility of UAS equipped with VIS_RGB, BG_NIR and TIR image sensors on the low cost UAV has proven to be more economical and efficient than previous vegetation survey methods that depend on satellites and aerial images, is expected to be used in areas such as precision agriculture, water and forest research.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.3
• /
• pp.945-953
• /
• 2018

In this paper, we use 3-D LIDAR for obstacle detection and avoidance maneuver for autonomous unmanned operation. It is aimed to avoid obstacle avoidance in unmanned water under marine condition using only single sensor. 3D lidar uses Quanergy's M8 sensor to collect surrounding obstacle data and includes layer information and intensity information in obstacle information. The collected data is converted into a three-dimensional Cartesian coordinate system, which is then mapped to a two-dimensional coordinate system. The data including the obstacle information converted into the two-dimensional coordinate system includes noise data on the water surface. So, basically, the noise data generated regularly is defined by defining a hypothetical region of interest based on the assumption of unmanned water. The noise data generated thereafter are set to a threshold value in the histogram data calculated by the Vector Field Histogram, And the noise data is removed in proportion to the amount of noise. Using the removed data, the relative object was searched according to the unmanned averaging motion, and the density map of the data was made while keeping one cell on the virtual grid map. A polar histogram was generated for the generated obstacle map, and the avoidance direction was selected using the boundary value.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.91-98
• /
• 2011

Road signs are part of the traffic facilities intended to guide drivers to their destinations in a safe and comfortable manner. Due to the creation of new routes, changes to the old routes, and the deterioration of road signs, road signs do require efforts to do ongoing field investigations and put the results in a database. The purpose of this study was to propose methodologies to do field investigations and build a database for road signs efficiently. For that purpose, a mobile mapping system was designed for field investigations. The designed mobile mapping system was comprised of three cameras to produce image information about road signs, GPS/IMU/DMI to obtain information about the position and attitude of a vehicle, and a laser scanner to generate information about the locations of road signs and routes. Also proposed in the study was a procedure to automatically detect the areas of road signs in the road signs images and recognize their characters.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.66-77
• /
• 2014

UTIS(Urban Traffic Information System) directly collects link travel time in urban area by using probe vehicles. Therefore it can estimate more accurate link travel speed compared to other traffic detection systems. However, UTIS includes some missing data caused by the lack of probe vehicles and RSEs on road network, system failures, and other factors. In this study, we suggest a new model, based on k-NN algorithm, for imputing missing data to provide more accurate travel time information. New imputation model is an adaptive k-NN which can flexibly adjust the number of nearest neighbors(NN) depending on the distribution of candidate objects. The evaluation result indicates that the new model successfully imputed missing speed data and significantly reduced the imputation error as compared with other models(ARIMA and etc). We have a plan to use the new imputation model improving traffic information service by applying UTIS Central Traffic Information Center.

• Journal of the Society of Disaster Information
• /
• v.17 no.4
• /
• pp.733-746
• /
• 2021

Purpose: This study was conducted for the purpose of selecting important events from among various events that may pose a risk to railway passengers. For this purpose, opinions of various railroad vehicle passengers and railway operator workers were investigated and analyzed. Method: The survey was conducted on 1,000 men and women in their 20s and 60s and 429 workers at 11 company across the country. A survey was conducted on the dangerous situations that may occur in subways, general railroads and high-speed rail vehicles targeting passengers. For railway operator workers, the questionnaire is limited to subway vehicles. Result: Among the passenger risk factors(abnormal behavior and dangerous situations) selected based on the frequency and importance of occurrence of passenger risk factors, the main risk factors are selected 'car door jamming', 'sexual harassment', 'intoxicating behavior', 'fighting' /assault', 'wandering around', and 'not wearing a mask'. Conclusion: The major risk factors affecting passengers were selected by surveying passengers and railway operators. we plan to develop a CCTV detection system with AI technology that can quickly and continuously detect the major risk factors of railway vehicles selected as a result of this study.