• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.102-111
• /
• 2009

In this paper, we propose a de-interlacing algorithm that combines a motion compensation (MC) method and the vertical-temporal filter with motion compensation (MC V-T filter) according to motion compensation reliability. The MC method represent one of the best ways of improving the resolution of de-interlaced frames, but it may introduce motion compensation artifacts in regions with incorrect motion information. In these regions, the MC V-T filter that is very robust to motion vector errors can be used to correct motion compensation artifacts. The combination between two methods is controlled by the motion compensation reliability that is measured by analyzing the estimated motion vectors and the results of MC. The motion compensation reliability contains information about motion compensation artifacts of MC results and determines the combination weight according to this information. Therefore, the combination rule of the proposed method is more accurate than those of the conventional methods and it enables the proposed method to provide high quality video sequences without producing any visible artifacts. Experimental results with various test sequences show that the proposed algorithm outperforms conventional algorithms in terms of both visual and numerical criteria.

• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.205-214
• /
• 2012

Crack widths play an important role in the serviceability limit state. When crack widths are controlled sufficiently, the reinforcement corrosion can be reduced using only existing concrete cover thickness due to low permeability in the region of finely distributed hair-cracks. Thus, the knowledge about the tensile crack opening is essential in designing more durable concrete structures. Therefore, numerous researches related to the topic have been performed. Nevertheless accurate measurement of a crack width is not a simple task due to several reasons such as unknown potential crack formation location and crack opening damaging strain gages. In order to overcome these difficulties and measure precise crack widths, a displacement measurement system was developed using digital image correlation. Accuracy calibration tests gave an average measurement error of 0.069 pixels and a standard deviation of 0.050 pixels. Direct tensile test was performed using ultra high performance concrete specimens. Crack widths at both notched and unnotched locations were measured and compared with clip-in gages at various loading steps to obtain crack opening profile. Tensile deformation characteristics of concrete were well visualized using displacement vectors and full-field displacement contour maps. The proposed technique made it possible to measure crack widths at arbitrary locations, which is difficult with conventional gages such as clip-in gages or displacement transducers.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.319-326
• /
• 2020

PRNGs(Pseudorandom number generators) are essential for generating encryption keys for to secure online communication. A bitstream generated by the PRNG must be generated at high speed to encrypt the big data effectively in a symmetric key cryptosystem and should ensure the randomness of the level to pass through the several statistical tests. CA(Cellular Automata) based PRNGs are known to be easy to implement in hardware and to have better randomness than LFSR based PRNGs. In this paper, we design PRNGs based on PMLCA(Programable Maximum Length CA) that can generate effective key sequences in symmetric key cryptosystem. The proposed PRNGs generate bit streams through nonlinear control method. First, we design a PRNG based on an (m,n)-cell PMLCA ℙ with a single complement vector that produces linear sequences with the long period and analyze the period and the generating polynomial of ℙ. Next, we design an (m,n)-cell PC-MLCA based PRNG with two complement vectors that have the same period as ℙ and generate nonlinear sequences, and analyze the location of outputting the nonlinear sequence.

• International Journal of Oral Biology
• /
• v.34 no.1
• /
• pp.21-28
• /
• 2009

Mutations in DLX3 are associated with both autosomal dominant hypoplastic hypomaturation amelogenesis imperfecta (ADHHAI) and tricho-dento-osseous (TDO) syndrome. ADHHAI is caused by a c.561_562delCT (2bp-del DLX3) mutation whereas TDO syndrome is associated with a c.571_574delGGGG (4bp-del DLX3) mutation. However, although the causal relationships between DLX3 and an enamel phenotype have been established, the pathophysiological role of DLX3 mutations in enamel development has not yet been clarified. In our current study, we prepared expression vectors for wild type and deletion mutant DLX3 products (4bp-del DLX3, 2bp-del DLX3) and examined the effects of their overexpression on the expression of the enamel matrix proteins and proteases. Wild type DLX3 enhanced the expression of matrix metalloprotease 20 (MMP20) mRNA and protein in murine ameloblast-like cells. However, neither a 4bp-del nor 2bp-del DLX3 increased MMP20 expression. Wild type DLX3, but not the above DLX3 mutants, also increased the activity of reporters containing 1.5 kb or 0.5 kb of the MMP20 promoter. An examination of protein stability showed that the half-life of wild type DLX3 protein was less than 12 h whilst that of both deletion mutants was longer than 24 h. Endogenous Dlx3 was also found to be continuously expressed during ameloblast differentiation. Since inactivating mutations in the gene encoding MMP20 are associated with amelogenesis imperfecta, the inability of 4bp-del or 2bp-del DLX3 to induce MMP20 expression suggests a possible involvement of such mutations in the enamel phenotype associated with TDO syndrome or ADHHAI.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.4 s.310
• /
• pp.37-45
• /
• 2006

In this paper, we propose the development of MHLA(Modulatory Hippocampus Learning Algorithm) which remodel a principle of brain of hippocampus. Hippocampus takes charge auto-associative memory and controlling functions of long-term or short-term memory strengthening. We organize auto-associative memory based 3 steps system(DG, CA3, CAl) and improve speed of learning by addition of modulator to long-term memory learning. In hippocampal system, according to the 3 steps order, information applies statistical deviation on Dentate Gyrus region and is labelled to responsive pattern by adjustment of a good impression. In CA3 region, pattern is reorganized by auto-associative memory. In CAI region, convergence of connection weight which is used long-term memory is learned fast by neural networks which is applied modulator. To measure performance of MHLA, PCA(Principal Component Analysis) is applied to face images which are classified by pose, expression and picture quality. Next, we calculate feature vectors and learn by MHLA. Finally, we confirm cognitive rate. The results of experiments, we can compare a proposed method of other methods, and we can confirm that the proposed method is superior to the existing method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6B
• /
• pp.930-939
• /
• 2010

Recently, many researches for making more comfortable input device based on gaze detection have been vigorously performed in human computer interaction. However, these previous researches are difficult to be used in IPTV environment because these methods need additional wearing devices or do not work at a distance. To overcome these problems, we propose a new way of controlling IPTV interface by using a detected face and eye positions in single static camera. And although face or eyes are not detected successfully by using Adaboost algorithm, we can control IPTV interface by using motion vectors calculated by pyramidal KLT (Kanade-Lucas-Tomasi) feature tracker. These are two novelties of our research compared to previous works. This research has following advantages. Different from previous research, the proposed method can be used at a distance about 2m. Since the proposed method does not require a user to wear additional equipments, there is no limitation of face movement and it has high convenience. Experimental results showed that the proposed method could be operated at real-time speed of 15 frames per second. Wd confirmed that the previous input device could be sufficiently replaced by the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.118-125
• /
• 2014

An approximation of speed of sound in the measurement plane is essential for the inverse estimation of temperature. To this end, an inverse problem relating the measured retarded time data in between set of sensors and actuators array located on the wall is formulated. The involved transfer matrix and its coefficient vectors approximate speed of sound of the measurement plane by using the radial basis function with finite number of interpolation points deployed inside the target field. Then, the temperature field can be reconstructed by using spatial interpolation technique, which can achieve high spatial resolution with proper number of interpolation points. A large number of retarded time data of acoustic paths in between sensors and arrays are needed to obtain accurate reconstruction result. However, the shortage of interpolation points due to practical limitations can cause the decrease of spatial resolution and deterioration of the reconstruction result. In this works, a regeneration for obtaining the additional retarded time data for an arbitrary acoustic path is suggested to overcome the shortage of interpolation points. By applying the regeneration technique, many interpolation points can be deployed inside the field by increasing the number of retarded time data. As a simulation example, two rectangular duct sections having arbitrary temperature distribution are reconstructed by two different data set: measured data only, combination of measured and regenerated data. The result shows a decrease in reconstruction error by 15 % by combining the original and regenerated retarded time data.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.175-181
• /
• 1985

Agrobacterium tumefaciens induces cancerous growths called crown galls at wound sites on dicotyledonous plants. A large plasmid called Ti plasmid is responsible for virulence. Upon tumor induction, part of the plasmid, termed T-DNA, becomes integrated into plant genome and its genetic sequences are expressed. These properties allow Ti plasmids to be used as gene vectors in plants. Several in vitro methods for the transfer of Ti plasmid into plant cell have been developed. One of them is the treatment of bacterial spheroplasts and plant protoplasts mixture with polyethylene glycol that is generally used as fusogen in cell-to-cell fusion. Several workers investigated the interaction of bacterial spheroplasts with plant protoplasts in the presence of polyethylene glycol and suggested that the interaction is not fusion but endocytosis. In this report we observed the interaction of Agrobacterium tumefaciens spheroplasts with Nicotiana tabacum protoplasts by electron microscope. Agrobacterium tumefaciens spheroplasts and Nicotiana tabacum protoplasts were prepared and mixed in the presence of polyethylene glycol and high pH-high $Ca^{2+}$ buffer. Then the interaction of the spheroplasts with the protoplasts was examined by transmission electron microscope. After the treatment of polyethylene glycol the spheroplasts adhered to the surface of the protoplasts and then they were engulfed by the protoplasts. After the high pH-high $Ca^{2+}$ buffer treatment the engulfed spheroplasts lost their cell integrity. No fusion process was observed. Thus all these observations suggest that the introduction process of Agrobacterium tumefaciens spheroplasts into Nicotiana tabacum protoplasts with the aid of polyethylene glycol is endocytosis.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.192-200
• /
• 2008

Multimodal biometrics is a method for personal authentication and verification using more than two types of biometrics data. RBF based score-level fusion uses pattern recognition algorithm for multimodal biometrics, seeking the optimal decision boundary to classify score feature vectors each of which consists of matching scores obtained from several unimodal biometrics system for each sample. In this case, all matching scores are assumed to have the same reliability. However, in recent research it is reported that the quality of input sample affects the result of biometrics. Currently the matching scores having low reliability caused by low quality of samples are not currently considered for pattern recognition modelling in multimodal biometrics. To solve this problem, in this paper, we proposed the RBF based score-level fusion approach which employs quality information of input biometrics data to adjust decision boundary. As a result the proposed method with Qualify information showed better recognition performance than both the unimodal biometrics and the usual RBF based score-level fusion without using quality information.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.859-869
• /
• 2007

Naked DNA and standard vectors have been previously used for gene delivery. Among these, PEI can efficiently condense DNA and has high intrinsic endosomal activities. The aim of this study is to investigate whether the cationic polycation PEI could increase the transfection efficiency of BMP expressing DNA using a vector-loaded collagen sponge model. BMP-2/pcDNA3.1 plasmid was constructed by subcloning human BMP-2 cDNA into the pcDNA3.1 plasmid vector. PEI/DNA complexes were prepared by mixing PEI and BMP-2/pcDNA3.1 and the constructed complexes were loaded into the collagen sponges. In vitro studies, BMSCs were transfected with the PEI/BMP-2/pcDNA3.1 complexes from collgen sponge. The level of secreted BMP-2 and alkaline phosphatase activities of transfected BMSCs were significantly higher in PEI/BMP-2/pcDNA3.1 group than in BMP-2/pcDNA3.1 group (p<0.05). Transfected BMSCs were cultured and mineralization was observed only in cells treated with PEI/BMP-2/pcDNA3.1 complexes. In vivo studies, PEI/BMP-2/pcDNA3.1/collagen, BMP-2/pcDNA3.1/collagen and blank collagen were grafted in skeletal muscle of nude mice. Ectopic bone formation was shown in PEI/BMP-2/pcDNA3.1/collagen grafted mouse 4 weeks postimplantation, while not in BMP-2/pcDNA3.1 grafted tissue. This study suggests that PEI-condensed DNA encoding for BMP-2 is capable of inducing bone formation in ectopic site and might increase the transfection rate of BMP-2/pcDNA3.1. As a non-viral vector, PEI offers the potential in gene therapy for bone engineering.