• 복식문화연구
• /
• 제22권3호
• /
• pp.503-510
• /
• 2014

Nowdays, costumer's washing behavior were often times for remove to light-duty dirt. The purpose of this study is to provide the most effective washing conditions of detergent concentration and temperature conditions for help save energy and water resources required to the washing process. Washing conditions were as follows: 2 kinds of detergents and 4 types of artificially soiled fabrics were used. Detergent concentration was 0%, -10%, and -20% below the recommended conc. of manufacturer's standard. Temperature of bath was $20^{\circ}C$ and $40^{\circ}C$. The results of this study were as follows: First, washing performances of all kind of artificially soiled fabric improved as the temperature of bath at $40^{\circ}C$. Second, the test was conducted under the condition of decreasing respectively -10% and -20% below of the recommended concentration of manufacturer's standard detergent. The average of washing efficiency was not considerably affected by the reduction of 10% below of manufacturer's standard. Third, in case of the water temperature were $20^{\circ}C$, polyester/cotton blended fiber were higher degree of washing efficiency than cotton fiber.

• 한국의류학회지
• /
• 제36권2호
• /
• pp.127-137
• /
• 2012

This study focuses on the optimal washing conditions for dry cleaning recommended fabrics to minimize dimensional changes using wet cleaning. We suggest water-based alternatives to a perchloroethylene based cleaning process. Wool and rayon fabrics were laundered under various washing conditions and then air-dried for 24hrs. All specimens were extended after spinning and shrunk after drying. This is probably because the fibers were swollen and extended by wetting. The wool fabrics were shown to be acutely influenced by washing temperature and mechanical force. The optimal washing conditions for wool fabric to minimize the dimensional change implied a normal washing temperature and minimized mechanical force. For rayon specimens, dimensional change by a hand wash showed a remarkable decrease compared with a machine wash. Rayon fabric seemed to be influenced by the quantity of water contained in the fabric after spinning and washing time. Therefore, the desirable washing conditions for rayon fabric are to reduce the time required for washing and to increase the spin speed.

• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.31-41
• /
• 2006

Functional properties are available with sputtering. But sputtering treatment alone cannot got a good fastness performance to washing, rubbing and light. This research was objected to investigate optimum condition by sputtering on polyester through various processing conditions such as ion current and treatment time, and then various resin treated onto metal coated polyester fabrics in order to increase washing fastness of metal membrane. As the results, the optimum conditions revealed 1500 mA of ion current, 2 min of treatment time in sputter, and suitable resin concentrations were 2% of o.w.s (on the weight of solution) in resin treatment. Therefore, we could get enhanced anti-static effect and flex stiffness as well as washing fastness in sputtered polyester fabric with various resin treatment, for example, melamine and polyurethane.

• Human Ecology Research
• /
• 제56권5호
• /
• pp.417-424
• /
• 2018

The use stage of a textile product impacts sustainability more significantly than other stages of the product's life cycle due to repeated washing and drying. This study determines efficient washing conditions, with high detergency, to reduce energy consumption from excessive washing and improve the washing process sustainability. Detergency was measured at various washing temperatures ($20^{\circ}C$, $40^{\circ}C$, and $60^{\circ}C$) and time (10 min, 20 min, and 30 min) using standardized soiled fabrics, i.e., 100% cotton, polyester/cotton (65%/35%), and 100% polyester woven fabric soiled with pigment/sebum, carbon black/mineral oil, soot/mineral oil, cocoa, blood, and red wine. Detergency at the washing condition of $20^{\circ}C$ and 30 min was higher than that at $40^{\circ}C$ and 10 min. In addition, detergency at the condition of $40^{\circ}C$ and 30 min was also higher than that at $60^{\circ}C$ and 10 minutes. This may be because a reduced washing effect at low washing temperatures was complemented by increased mechanical action over a long time. Further, washing temperature and time, with the same detergency, differed based on the type of fiber and soil. Also, the influence of a detergent on the detergency depends on the type of soil. The results suggest that energy and detergent have been consumed more than necessary in actual laundry. According to each type of fiber and soil, washing conditions designed to reduce the energy consumption of the washing process while maintaining the same detergency, were determined.

• 한국식품조리과학회지
• /
• 제21권5호
• /
• pp.703-708
• /
• 2005

The purposes of this study were to establish washing conditions for vegetable salad to reduce the microbial hazard by using sodium hypochlorite solution and eventually to implement HACCP for salad processing. By using the salad production line of Shinkeum Co. located in Gwacheon, Gyunggi-do, salad samples were washed under several washing conditions (chlorine dip period, chlorine concentration, rinse time, etc.) to determine the most effective conditions. The original washing line consisted of 3 baths (100 ppm chlorine water dip, water rinse, and water rinse), each with a capacity of 100 L of tap water and 5 kg of salad. First, the salad samples were washed with 100 ppm of sodium hypochlorite solution for various dip times (3, 6, 9, 12 min); however, only a 1 log- or less-reduction in total microbial counts was achieved in all groups and the time of chlorine water dip was not a significant factor in reducing the microbial hazard. When another water bath was added before the chlorine water dip (4-bath washing), a 2 log-reduction in total microbial counts was achieved. This result suggested the importance of pre-dipping salad materials in water before chlorine treatment to reduce the organic load on the surface of the vegetables. Coliforms were not detected at all after washing. As the concentration of chlorine $(50{\sim}150\;ppm)$ and rinse time $(0.5{\sim}2\;min)$ increased, greater microbial reduction was achieved; however, physical damage of the salad was observed. Finally, the optimum washing conditions for salad were determined as 3 min-water dip, 3 min-chlorine (100 ppm) dip, 2 min-rinse, and 2 min-rinse.

• 한국의류학회지
• /
• 제12권1호
• /
• pp.69-80
• /
• 1988

In this study, we have compared the relative importance of various washing condition affecting on soil release for P/C blended fabrics. P/C blended fabrics were soiled by the pad-dry method with aqueous and oily soil. The washing procedures of soiled samples were performed by Atlas Launder-Ometer with 27 wash conditions which are combinations of wash temp. wash time and detergent cone. The degree of soil-release was evaluated with CIE 1976 Lab color difference before and after washing. Multiple regression analysis was used to evaluate the optimum wash conditions and the relative importance of the factors providing maximum soilremoval.

• 한국의류산업학회지
• /
• 제9권6호
• /
• pp.671-678
• /
• 2007

Formulations of compact and supercompact heavy-duty detergents, which are being used widely around the world, differ from those of conventional heavy-duty detergents. Significant differences in composition exist between the compact detergents and the conventional detergents. The compact detergents have a higher content of surfactants, oxygen bleach and enzymes than the conventional detergents. We have studied to find the most effective washing conditions of artificially soiled cloths with a commercial, supercompact, heavy-duty detergent and a drum type washing machine which is becoming the preferred type in Korea. Moreover, we have studied the washing performance with an impeller type washing machine, which has heretofore been the most popular type in East Asia. With the drum-type washing machine, washing performances improved as the washing temperatures went up and the washing times were lengthened. Though the rate of soil removal with a double recommended dosage was higher than with the recommended amount at $20^{\circ}C$, the effects of the higher dosage decreased as the washing temperatures increased. Finally, the washing performances with the two different dosages were the same at $60^{\circ}C$. The washing performances at $40^{\circ}C$ with the recommended dosage for 90 minutes were the same as with the double recommended dosage for 45 minutes. The soil removal efficiencies with the impeller-type washing machine were much lower than those of the drum-type washing machine. The reasons for this were the higher bath ratio that led to the lower concentration of wash liquor, the shorter washing time, and the lower washing temperature.

• 한국의류학회지
• /
• 제20권6호
• /
• pp.1048-1061
• /
• 1996

The most important practical feature that represents the performance of a washing machine is its ability to remove stains or soils from clothes. There are various tests to measure a washing machine's ability to remove stains or soils from clothes. The results of these tests are dependent upon the kind of soiled fabrics used. Moreover, these results may reflect some aspects of the effectiveness of a washing machine in cleaning clothes due to the paritcular compositions of chemicals which comprise soils in soiled fabrics and the particular conditions in which the results are evaluated. After selecting factors presumed to have a major effect on the cleaning ability of a washing machine and choosing most widely used soiled fabrics, we use experimetal statistics methods to screen real factors from them that influence the cleaning ability of a washing machine in a statistically significant manner for each soiled fabric. Using the least number of experimental rules required to extract the necessary information, we then proceed to present the study on the relations between the sets of selected factors and the soiled fabrics. We would then suggest which soiled fabrics is the best for evaluating the performance in cleaning clothes of a washing machine based on the above study.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.431-439
• /
• 1996

본 연구에서 탐구된 새로운 설계조건과 설계원칙들을 적용함으로써 세탁기용 트랜스미션으로 대표되는 기계 시스템을 효과적으로 설계할 수 있었다. 개발된 자동설계 프로그램을 이용함으로써 다양한 설계시뮬레이션을 단기간에 수행할 수 있었으며 설계 실무자로 하여금 설계변수와 상태변수 등에 관한 민감도를 파악하게 하는데 매우 효과적이었다. 본 연구에서 새롭게 제안된 시스템 설계조건들과 설계원치기들은 세탁기용 트랜스미션 뿐만 아닌 일반적인 기계시스템 설계시에도 적용될 수 있는 것으로 판단된다.

• 대한가정학회지
• /
• 제19권1호
• /
• pp.39-45
• /
• 1981

The fishes that are mostly used in our homes such as Pacific Mackeral, hair Tail and Alaska Pollack were devided into Freezing group, Refrigerating group and Room temperature group according to storage temperature. TVB-N, TMA-N, TMA-O and pp.H. were measured in natural state, after water washing and 3% NaCl-water washing. The results are as follows: 1. Regardless of the kinds of fishes, TVB-N in room temperature showed that rottenness first appeared after 5~8 hours in raw state, 6~12 hours in water washing, and 8~12 hours in 3% NaCl-water washing. 2. Regardless of freezing and refrigeration, Pacific Mackeral became rotten after 14 days in raw state, 14~17 days in water washing and 17 days in 3% NaCl water washing. Alaska Pollack and Hair Tail showed rottenness after 8 days in raw state, 11 days in water and 3% NaCl water washing. 3. Even in hot summer days, freshness could be preserved for 10 days if fishes were freezed ($-20^{\circ}C$) or refrigerated (4~$8^{\circ}C$) after bowel excluded, washed in NaCl water and enveloped in poly-ethylene bag.