• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.279-286
• /
• 2017

This review paper evaluates different kinds of synthesis methods for calcite precipitated calcium carbonates by using different materials. The various processing routes of calcite with different compositions are reported and the possible optimum conditions required to synthesize a desired particle sizes of calcite are predicted. This paper mainly focuses on that the calcite morphology and size of the particles by carbonation process using loop reactors. In this regard, we have investigated various parameters such as $CO_2$ flow rate, Ca $(OH)_2$ concentration, temperature, pH effect, reaction time and loop reactor mechanism with orifice diameter. The research results illustrate the formation of well-defined and pure calcite crystals with controlled crystal growth and particle size, without additives or organic solvents. The crystal growth and particle size can be controlled, and smaller sizes are obtained by decreasing the Ca $(OH)_2$ concentration and increasing the $CO_2$ flow rate at lower temperatures with suitable pH. The crystal structure of obtained calcite was characterized by using X-ray diffraction method and the morphology by scanning electron microscope (SEM). The result of x-ray diffraction recognized that the calcite phase of calcium carbonate was the dominating crystalline structure.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S1
• /
• pp.40-68
• /
• 1995

As silicon divice geometrics become smaller and aspect ratios larger, processing technoloty is moving from PVD into the area of CVD and OMCVD. Many new source materials are in the research and development stage, and have placed challenging demands on materials delivery technology. This paper will describe the many successes achieved with various delivery methods including thermal, bubblers, pressure-based and Direct Liquid Injection.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.34-34
• /
• 2010

Absolute electron-impact cross sections for molecular targets including their radicals are important in developing plasma reactors and testing various plasma processing gases. However, low-energy electron collision data for these gases are sparse and only the limited cross section data are available. In this presentation, the methods and the status of measurements of, mainly, absolute elastic cross sections for electron-polyatomic molecule collisions will be discussed with recent results from Chungnam National University. Elastic cross sections are essential for the absolute scale conversion of inelastic cross sections, as well as for testing computational methods.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.606-607
• /
• 2014

Due to Web Services' platform and language independent nature, many business corporations have used them for the integration of various applications. However, the growing amount of available Web Services on Web forms a new problem - how to select and recommend an appropriate Web Service that matches the user requirements. In this paper, we investigate recommendation methods in Web Services, and discuss their strength and limitations.

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.970-980
• /
• 2018

We evaluated the effects of pre-cooking methods on the quality of reheated marinated pork loin. Frozen marinated pork loins cooked using various methods (boiling, grilling, pan frying, infrared cooking, and superheated steam cooking) were reheated in a microwave, and their pH, color, cooking loss, re-heating loss, total loss, thiobarbituric acid reactive substance (TBARS) value, sensory properties, and shear force were determined. Although all parameters varied with different cooking methods, lightness values and TBARS values showed the tendency to decrease and increase, respectively, after reheating. Superheated steam-cooked samples showed the lowest values of cooking loss, total loss, TBARS value, and shear force (p<0.05) and the highest lightness, redness, and yellowssness values and juiciness, chewiness, and overall acceptability scores (p<0.05). These results show that pre-cooking with superheated steam maintains the quality characteristics of marinated pork loin upon reheating. Therefore, pre-cooking with superheated steam may be beneficial for the commercial distribution of frozen cooked marinated pork loin.

• Food Science of Animal Resources
• /
• v.42 no.5
• /
• pp.861-873
• /
• 2022

The drying of duck blood provides safety and commercial benefits, but each drying method has its own characteristics. Moreover, information on the effects of diverse drying methods on the quality of duck blood is limited. This study aimed to investigate the effects of various drying methods on the chemical and functional properties of duck blood. The physicochemical characteristics and functional properties of duck blood subjected to spray drying (SD), freeze drying (FD), vacuum drying (VD), and hot air drying (HD) were examined. The carbonyl content of FD duck blood powder was the lowest and the thermal stability was higher than that of the other treatments (p<0.05). The gel obtained from spray-dried blood displayed the lowest malondialdehyde content. The hardness, gumminess, and chewiness were the highest in the heat-induced gel prepared from FD duck blood powder (p<0.05). The gel obtained from FD duck blood displayed a denser structure than the other gel samples. Taken together, the FD duck blood exhibited excellent chemical properties and processing suitability.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.3
• /
• pp.165-170
• /
• 2019

Recently, modern society has come up with the importance of video processing as various imaging systems have developed. However, deterioration occurs in the process of transmitting, processing, and storing video data for various reasons. Deterioration will damage the original image, and the typical noise is Salt and Pepper noise. There are A-TMF, CWMF, and linear interpolation as the means to eliminate Salt and Pepper noise. However, these methods show somewhat poor noise abatement performance in high-density noise areas. Therefore, this paper proposes an algorithm to eliminate noise using modified linear interpolation. To prove the validity of the proposed algorithm, PSNR, Profile was used to compare it with existing methods.

• ETRI Journal
• /
• v.18 no.3
• /
• pp.107-125
• /
• 1996

In this paper, we define the general requirements of ATM switching systems such as scalability, distributed fashion, and modularity. Also we propose a practical implementation of a scalable ATM switching system whose capacity can be easily expanded. Firstly, the architecture of the system is discussed with an emphasis on system scalability, modularity of subsystems and the simple control network of the design requirements. Secondly, we suggest the three types of distributed call/connection control schemes that are suitable for our switching system. We also estimate their call processing capacity on the average and make a comparison of them under the various system architectures. Since our scalable switching system can be constructed to perform the call processing functions on the various levels of the system capacity, it has much adaptability at the various evolution phases or regions of the network environment.

• Transactions of Materials Processing
• /
• v.32 no.3
• /
• pp.114-121
• /
• 2023

During rolling, rolling mill rolls endure wear when shaping metal billets into a desired form, such as bars, plates, and shapes. Such wear affects the lifespan of the rolls and product quality. Therefore, in addition to rigidity, wear performance is a key factor influencing the performance of rolling mill rolls. Conventional methods such as casting and forging have been used to manufacture rolling mill rolls. However, powder alloying methods are increasingly being adopted to enhance wear resistance. These powder manufacturing methods include atomization, canning to shape the powder, hot isostatic pressing to combine the powder alloy with conventional metals, and various wear performance tests on rolls prepared with powder alloys. In this study, numerical simulations and experimental tests were used to develop and elucidate the wear analysis mechanism of rolling mill rolls. The wear characteristics of the rolls under various rolling conditions were analyzed. In addition, experimental tests (wear and surface analysis tests) and wear theory (Archard wear model) were used to evaluate wear. These tests were performed on two different materials in various powder states to evaluate the different aspects of wear resistance. In particular, this study identifies the factors influencing the wear behavior of rolling mill rolls and proposes an analytical approach based on the actual production of products. The developed wear analysis mechanism can serve the future development of rolls with high wear resistance using new materials. Moreover, it can be applied in the mechanical and wear performance testing of new products.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.3
• /
• pp.515-521
• /
• 2020

Deep learning methods have been effectively used to provide great improvement in various research fields such as machine learning, image processing and computer vision. One of the most frequently used deep learning methods in image processing is the convolutional neural networks. Compared to the traditional artificial neural networks, convolutional neural networks do not use the predefined kernels, but instead they learn data specific kernels. This property makes them to be used as feature extractors as well. In this study, we compared the quality of CNN features for traditional texture feature extraction methods. Experimental results demonstrate the superiority of the CNN features. Additionally, the recognition process and result of a pioneering CNN on MNIST database are presented.