• Horticultural Science & Technology
• /
• v.31 no.2
• /
• pp.224-230
• /
• 2013

The objective of this study was to identify the content of phenolic and volatile organic compounds in edible and non-edible parts of 'Seolhyang' strawberry plants. We performed a comparative chemical analysis of the compounds found in roots, leaves, petioles, runners, and unripe and ripe fruits during vegetative propagation and reproductive growth. The contents of ellagic and gallic acids in the leaves of runner plants during vegetative propagation were $7.36{\pm}1.10$ and $5.07{\pm}3.66mg{\cdot}g^{-1}$ FW, respectively, and were higher than those in the other parts. The main volatile organic compound was identified as 3-hexen-1-ol, and it was mostly detected in leaves. The content of ellagic acid in leaves during reproductive growth was $12.96{\pm}2.30mg{\cdot}g^{-1}$ FW, while that in the other parts was below $6.00mg{\cdot}g^{-1}$ FW. The content of gallic acid in unripe fruits was $2.75{\pm}0.48mg{\cdot}g^{-1}$ FW and was higher than that in the other parts. Ripe fruits contained the lowest contents of ellagic and gallic acids but contained the most diverse volatile organic compounds, including sesquiterpenes, among the tested plant parts. The results indicate that non-edible parts (e.g., leaves and unripe fruits) of strawberry plants can be used as a raw material for antioxidant and anti-inflammatory agents, and edible parts (i.e., ripe fruits) can be available for making an essential oil.

• Journal of the Korean Society of Systems Engineering
• /
• v.4 no.1
• /
• pp.35-43
• /
• 2008

Generally, in analysis of reliability of Design and Development Phase, reliability of electrical components is analyzed based on standards such as MIL-HDBK-217F, Bellcore Issue 4,5,6 by analyzing stress of architectural side (Power, Voltage, Current and quality level of components) of weapon system and stress of operational side (operational environment, operational temperature, Operational Profile). But the reliability of mechanical components is analyzed based on the data book of failure history of mechanical parts called NPRD-95(Nonelectronic Parts Reliability Data-95) without any analysis of above stress. However, even if it's the same mechanical parts, it might have different failure rate(fatigue, wear, corrosion) during operation depending on how weary(stress : pressure, vibration, temperature during operation) the parts are. Therefore, analyzing reliability using just data book can cause big difference in reliability instead of analyzing based upon stressfulness that parts might have, operational concept, and other various factors. Thus, This paper will guide the way of predicting reliability by organizing ways of predicting reliability for system organization and adopt ing NSWC-98/LE1(Naval Surface Warfare Center-98/LE1) for mechanical components.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.178-182
• /
• 2013

In mining and its similar industries, compact excavators are used commonly in narrow working spaces, of which bucket must be rotated essentially. Considering of those applications, many kinds of the compact excavators have been developed, but any stress evaluation of bucket rotating part had not been attempted. In this study, using of the finite element method and Spare solver, stress analysis has been performed on the bucket rotating parts and its adjacent parts of compact excavator, with using an excavation stress model, in various directions and positions. Resultantly, it has been defined that stress of connector in the rotating part is a little higher, due to its shape, than those remained parts of which stress are shown equally as 1 MPa. Especially in the moving parts, the stress of bucket pin and rotating pinion gear has been calculated as 7.7 MPa and 40 MPa respectively.

• Journal of Powder Materials
• /
• v.17 no.1
• /
• pp.7-12
• /
• 2010

In this work, effect of various process-control agents (PCAs) on the mechanical alloying of amorphous alloy of $Al_{85}Y_8Ni_5Co_2$ has been investigated. The dependence of the particle shape, size and crystallization behavior of the amorphous alloy powders on the type of PCAs and their concentrations was investigated by using X-ray diffraction, field-emission scanning electron microscopy and differential scanning calorimetry. It was found that the additive of toluene could affect positively the amorphization and thermally induced crystallization processes, as well as the size refinement, morphology and particle-size distribution of as-milled powders in comparison with alloy obtained without PCA.

• Journal of Agricultural Extension & Community Development
• /
• v.28 no.1
• /
• pp.53-68
• /
• 2021

This study aimis to identify policy priorities for promoting youth activities through the Importance-Performance Analysis (IPA). IPA is used to identify policy priorities for promoting local youth activities. The IPA tabulated result is presented in a two-dimensional grid to showing for promoting local youth activities, The require concentrate support part is divided into 3 parts. Problem solve supporting at work development of leisure activities programs, leisure activities programs developing and development of leisure-related professionals. And leisure-related professionals developing. The next parts that require continuous management were divided into four parts. The next parts that require continuous management is divided into four parts. Creating rental housing for young people, support for housing expenses supporting, loans supporting, and Holiday guaranteed. Based on the factors that support youth activities that make up the IPA matrix, the implications of revitalizing local youth activities is presented as below. First, ensuring employment of local youth and efforts to create sustainable jobs. Second, continuous efforts to improve the housing conditions of local youth, and third, policy support is needed for local youth to do various leisure activities.

• Journal of Korea Trade
• /
• v.24 no.3
• /
• pp.55-72
• /
• 2020

Purpose - In this paper, we provide recommendations for Korea's long-term direction and strategic measures to attract inward foreign direct investment (FDI) in response to Japan's export regulations. In doing so, we analyze the current situation and characteristics of trade between Korea and Japan, focusing on the parts and materials industry, which is particularly affected by Japan's trade regulations. Design/methodology - Based on the analysis of five successful inward FDI cases (e.g. Toray, IGK, Delkor, GlobalWafers, DuPont) and statistic trend review in the parts and materials industry, we consider various factors pertaining to successful inward FDI in Korea and propose valuable investment attraction strategies. Findings - For a successful investment attraction strategy, we studied some statistical trends in the internal and external environments of the parts and materials industry and successful investment attraction cases in Korea. We have found that in order to increase the probability of success in attracting investment, we need a mid-to long-term strategy considering multiple factors such as "Production-oriented, Demand-linked, Global Value Chain (VGC) linked, and Policy-linked investment attraction." Originality/value - We suggest several specific measures and important strategic implications for the Korean government and firm's managers to attract inward FDI successfully.

• Korean Journal of Agricultural Science
• /
• v.45 no.3
• /
• pp.379-384
• /
• 2018

In this study, we analyzed the amino acid contents of corn to provide basic data for promoting the use of proteins in livestock. The present study was done to examine the amino acid contents of the corn 'Gwangpyungok' grown in a natural field at the National Institute of Animal Science, Cheonan province, Korea, in 2016. Gwangpyungok, which is Korean corn cultivar, was used as the sample to provide basic data for promoting the use of proteins in livestock by analyzing the amino acid contents of each part of corn as a breed that is adaptable to the environment of Korea. The asparagine acid content was the highest in the leaf blade among the parts of corn, and the glutamic acid content was the highest in the corn ear, stem, leaf sheath, corn bract and inflorescence. The essential amino acids in the corn ear, leaf blade and inflorescence revealed that their contents were in the following order: leucine > phenylalanine > valine > threonine > lysine > isoleucine, and in the inflorescences and stem, leaf sheath and corn bract, their contents were in following order: leucine > valine > phenylalanine > threonine > lysine > isoleucine. Therefore, further research on the nutritional aspects of forage must be performed because livestock growth is influenced by the nutritive value of the various parts of forage.

• Journal of Plant Biology
• /
• v.34 no.2
• /
• pp.93-100
• /
• 1991

Walnut (Juglans regia L.) is a common cultivated and wild deciduous tree in the temperate regions of Pakistan and elsewhere. A bare or poor understorey of wild or cultivated species is frequently observed beneath and around it. Soil analysis indicated insignificant differences in nutrient status of soils taken from areas with or without walnut influence. Field investigations revealed that the height, shoot, fresh and dry weight of potato, turnip, corn and bean significantly decreased in the walnut-influenced parts of the field compared to their counter-parts in the same field but without walnut influence. Aqueous extracts from various parts, shoot litter, natural rain leachates and soil collected from beneath walnut significantly reduced the germination, early seedling growth, fresh and dry weight, and moisture contents of corn, turnip and bean in various laboratory experiments. Ferulic, p-coumaric, caffeic, vanillic, jJ-hydroxybenzoic, chlorogenic and gallic acid were identified as the possible allelopathic substances in the aquous extracts and rain leachates of the walnut tree. The findings suggest that the observed poor growth of crops is due to allelopathic effects of walnut.walnut.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.1
• /
• pp.44-53
• /
• 2014

A lightning strike to the aircraft seriously affects the aircraft and its components in various ways. As one of the most critical threats to the flight safety of an aircraft, fuel vapour ignition by lightning can occur through various means, notably through hot spot formation on the fuel tank skins. In this study, a coupled thermal-electrical approach using the commercial software ABAQUS is used to study the effects of a lightning strike on aircraft fuel tanks. This approach assumes that the electrical conductivity of a material depends on temperature, and that a temperature rise in a material due to Joule heat generation depends on electrical current. The inter-dependence of thermal and electrical properties-the thermal-electrical coupling-is analyzed by a coupled thermal-electrical analysis module. The analysis elucidates the effects of different material properties and thicknesses of tank skins and identifies the worst case of lightning zones.

• Korea-Australia Rheology Journal
• /
• v.16 no.4
• /
• pp.163-168
• /
• 2004

In this study, an ultrasonic technique was employed to obtain pressure-volume-temperature (PVT) rela­tionship of polymer melt by measuring ultrasonic velocities under various temperatures and pressures. The proposed technique was applied to on-line monitoring of injection molding process as an attempt to predict quality of molded parts. From the comparison based on Tait equation, it was confirmed that the PVT behav­ior of a polymer is well described by the variation of ultrasonic velocities measured within the polymer medium. In addition, the changes in part weight and moduli were successfully predicted by combining the data collected from ultrasonic technique and artificial neural network algorithm. The results found from this study suggest that the proposed technique can be effectively utilized to monitor the evolution of solid­ification within the mold by measuring ultrasonic responses of various polymers during injection molding process. Such data are expected to provide a critical basis for the accurate prediction of final performance of molded parts.