• 제목/요약/키워드: variation rate

검색결과 4,153건 처리시간 0.041초

Synthetic MR을 이용한 정량적 평가에서 Coil channel 수 변화에 따른 재현성 평가 (Evaluation of Reproducibility According to Variation of Coil Channel in Quantitative Evaluation Using Synthetic MR)

  • 권순용;김성호
    • 한국방사선학회논문지
    • /
    • 제11권5호
    • /
    • pp.343-351
    • /
    • 2017
  • 최신 영상 기법인 MAGiC sequence의 RF coil channel 수 변화에 따른 T1, T2 이완 시간 및 T1, T2 이완율을 측정하여 분석하였고 그에 따른 재현성을 평가하였다. Channel 수가 각각 (1, 8, 16, 32)channel 인 RF coil에 조영제 phantom(1.0, 0.6, 0.2, 0mM)을 위치시키고 MAGiC sequence를 이용하여 T1, T2, R1, R2 map을 획득하였다. 그리고 각각의 channel 수와 농도별로 T1, T2, R1, R2 value 그리고 relaxation rate를 측정하였고 이를 기반으로 각 농도에 따른 Relaxivity를 구하였다. 각각의 coil에서 T1, T2, R1, R2 value를 측정한 결과 T1, R1 value는 coil간의 유의한 차이가 없었다(p>0.05). 하지만 T2, R2 value는 유의한 차이가 있는 것으로 나타났다(p<0.05). 사후분석 결과에서는 T2 value의 경우 1 channel coil에서 측정한 결과가 8, 16, 32 channel coil에서 측정한 결과와 유의한 차이가 나타났고(p<0.05) 8, 16, 32 channel coil간의 차이는 나타나지 않았다(p>0.05). R2 value의 경우도 마찬가지로 1 channel coil에서 측정한 결과가 8, 16, 32 channel coil에서 측정한 결과와 유의한 차이가 나타났으며 또한 8 channel coil에서 측정한 결과와 16 channel coil에서 측정한 결과가 유의한 차이가 나타났다(p<0.05). 결론적으로 T1, R1 value는 coil의 channel 수 변화에 따른 차이가 크지 않지만 T2, R2 value는 큰 차이를 나타냈다. 따라서 MAGiC sequence를 이용하여 T2, R2 value를 정량적으로 측정할 경우 재현성을 위해 동일한 channel 수의 coil을 사용해야 할 것으로 사료된다.

벼의 이상적인 초형에 관여하는 QTL 분석 (QTL Analysis of Concerned on Ideal Plant Form in Rice)

  • 정일경;김경민
    • 한국자원식물학회지
    • /
    • 제30권2호
    • /
    • pp.213-218
    • /
    • 2017
  • 본 실험은 청청과 낙동 조합을 약배양하여 육성한 120 계통을 이용하여 이상적인 초형에 관련된 간장, 수장, 개체당 이삭수에 대한 QTLs를 분석하고 탐색된 QTLs은 다음과 같은 결과를 얻었다. 모부본인 청청과 낙동의 간장의 평균은 $75.3{\pm}6.72cm$, 수장의 평균은 $20.6{\pm}2.08cm$이었으며 개체당 이삭수의 평균은 $16.0{\pm}2.37$개로 나타났다. 120 계통의 CNDH의 간장의 평균은 $71.6{\pm}17.38cm$였으며, 수장의 평균은 $20.3{\pm}2.24cm$였으며 개체당 이삭수의 평균은 $16.1{\pm}7.17$개로 나타났다. 이에 대한 CNDH 계통의 빈도분포표의 곡선은 정규분포에 가까운 연속변이를 나타내었다. 간장, 수장, 개체당 이삭수 QTL 분석결과 간장에서 1번 염색체의 qPlL1-1, qPlL1-2, 5번 염색체의 qPlL5, 수장에서 2번 염색체의 qPL2, 3번 염색체의 qPL3, 10번 염색체의 qPL10, 개체당 이삭수에서 1번 염색체의 qPN1-1, qPN1-2, 9번 염색체의 qPN9이 탐색되었다. 간장에 대한 QTL에서 5번 염색체의 LOD 값은 3.81, 상가적 값은 5.49였으며, 수장에 대한 QTL에서 2번 염색체의 LOD 값은 7.13, 상가적 값은 -2.58 이었으며, 3번 염색체의 LOD 값은 3.20, 상가적 값은 0.88로 나타났다. 개체당 이삭수에 대한 QTL에서 9번 염색체의 LOD 값은 4.27, 상가적 값은 -1.60으로 나타났다. 초형 관련 분석 결과에서 탐색된 9개 마커를 토대로 간장에 대한 RM5311, 수장에 대한 RM555, 개체당 이삭수에 대한 RM8111을 선발하여 모부본인 청청, 낙동을 기준으로 자포니카형 22 품종, 인디카형 12 품종에 다형성을 분석하였다. 그림4와 같이 청청과 낙동과 같은 밴드양상을 나타나거나 다른크기상태의 밴드양상을 나타내었다. 간장, 수장, 개체당 이삭수의 일치율은 각각 44.11%, 41.17%, 44.11%로 나타났다.

전기도금을 이용한 스테인레스 스틸 선재의 직경 증가에 관한 실험적 연구 (An experimental study on diameter increase of orthodontic wire by electroplating)

  • 조진형;성영은;이기헌;황현식
    • 대한치과교정학회지
    • /
    • 제33권2호
    • /
    • pp.121-130
    • /
    • 2003
  • 본 연구는 전기도금을 이용하여 교정용 선재의 직경을 증가시킨 후 그 물성 변화를 알아봄으로써 이의 임상적 적용 가능성을 알아보고자 시행되었다. 0.016 인치 스테인레스 스틸 교정용 선재에 전기도금을 위한 적절한 전처리를 시행한 후, 황산 니켈 100g/L, 염화니켈 60g/L, 붕산 30g/L, 염화나트륨 50g/L의 조성을 가지는 전해액을 제조하여 1.7V의 전압과 $25\~29^{\circ}$의 온도, $3.1\~3.3pH$의 조건 하에서 직경을 0.002 인치 증가시켜 0.018 인치 직경의 선재로 만들었다 전기도금 과정 중 1분 단위로 직경을 측정하여 시간에 따른 직경 증가율을 구하였고, 도금 후 서로 다른 세 지점의 직경을 계측하여 균일성을 평가하였으며, 도금 금속의 정성분석을 위하여 X-선 회절검사를 시행하였다. 도금층의 밀착성 증진을 위해 $400^{\circ}$의 전기로에서 10분간 열처리를 시행한 후 도금 전후와 열처리 전후의 물성 변화를 알아보기 위하여 3점 굴곡 실험을 시행하여 다음과 같은 결과를 얻었다. 1.전반적인 하중-변형률 곡선을 보면 0.016인치 군과 0.018인치 군 사이에 도금 처리한 군이 존재하였으며 열처리한 경우가 0.018 인치 군에 더욱 가까워지는 양상을 보였다. 2. 도금에 이해 지경은 0.002이차 증가시킨 군이 기존의 0.016이차 군에 비하여 강성과 항복강도 극한강도 모두 증가하는 경향을 보였으며 이중 강성과 극한 강도는 통계적으로 유의한 차이를 보였다. 3. 0.016인치에서 도금에 의해 직경을 0.002인치 증가시킨 군이 기존의 0.018인치 군보다 강성과 항복강도, 극한강도 모두에서 낮게 나타났으며 통계적 유의차를 보였다. 4. 도금 후 열처리를 시행한 군이 시행하지 않은 군보다 강성, 항복강도, 극한강도 모두 높은 경향을 보였으며, 극한강도에서 유의한 차이를 나타내었다. 5. 전기도금 후 서로 다른 세 지점의 직경차이는 $0.1\~0.3\%$로 균일하게 나타났으며 통계적으로도 유의차가 존재하지 않았다.

수리영역 개념을 적용한 단열암반의 지하수유동체계 해석 (Analysis of a Groundwater Flow System in Fractured Rock Mass Using the Concept of Hydraulic Compartment)

  • 조성일;김천수;배대석;김경수;송무영
    • 지질공학
    • /
    • 제16권1호
    • /
    • pp.69-83
    • /
    • 2006
  • 본 연구는 지하유류저장공동 굴착 시 조사된 단열체계 및 수리 인자를 토대로 투수성구조영역과 수리암반영역으로 세분화하여 연구지역의 불규칙하고 복잡한 지하수유동체계를 해석해 보고자 하였다. 지하공동 내에서 확인된 단열분포특성과 지하공동굴착과 동시에 지표관측공 28개를 통해 측정된 지하수위 및 수평수벽공 95개와 수직수벽공 63개에 의해 일별로 계측된 압력 및 주입량을 통해 연구지역은 지하수의 방벽역할을 하는 3개의 투수성구조영역과 4개의 수리암반영역으로 구분이 가능하였다. 공동심도에 발달된 투수성 구조는 국지적 큰 규모 단열대인 NE-1과 2개의 국지규모 단열대로 구성되고 있으나, 수리암반영역은 국지규모 단열대에 의하여 4개 영역으로 구분된다. FZ-2 구조대와 인접한 수리암반영역 Domain-A와 B는 수평수벽공의 초기압이 최대 약 $15kg/cm^2$까지 높으며, 지하공동 굴착 시 상 하부의 지하수위변화의 차이가 $10\sim40m$로 상 하부의 수리적 연결성이 양호한 것으로 평가된다. 반면, FZ-1 구조대와 인접한 Domain-C와 D는 이중수위측정 시설 설치시 상부와 하부의 지하수위차는 최대 약 120 m로 매우 크게 나타났으며, 상부 지하수는 공동굴착 시 수위 가 크게 변화하지 않았다. Domain C, D의 하부암반의 수리 전도도$(7.2X10^{-10}m/sec)$는 상대적으로 낮은 지하수 함양량의 원인을 제공하고 있으며, 연속체개념 의 지하수유동모델링을 통해 계산된 4개 영역의 함양량은 연구지역의 20년간 평균 강수량(1,356 mm/year)의 2%로 계산되었다.

벼 밀양 23호$\times$기호벼의 재조합 자식계통에서 초기급속등숙과 미질 특성 (Variation of Grain Quality and Grain Filling Rapidity Milyang 23 / Gihobyeo Recombinant Inbred Lines)

  • 곽태순;여준환
    • 한국작물학회지
    • /
    • 제49권3호
    • /
    • pp.160-166
    • /
    • 2004
  • 벼 M/G RIL 162 계통에 대한 초기급속등숙율에 대한 이화학적특성 및 색차색도특성 변이에 대한 주성분분석 및 유전력분석의 결과를 요약하면 다음과 같다. 1. 초기급속등숙율이 41% 이하인 계통군은 164계통중 74계통이었으며, 41∼60%의 계통군에는 32계통이 있었다. 또한, 초기급속등숙율이 빠른 계통군에 속하는 61∼80%사이에는 24계통이 있었으며, 초기급속등숙율이 매우 빠른 계통군으로 분류되는 81% 이상인 계통은 32계통이 있었다. 2. 벼 M/G RIL 164계통에 대한 품종군별 이화학적특성을 보면, 초기급속등숙을이 40% 이하인 계통군이 단백질 함량이 9.1%로 가장 높았으며, 지방산함량은 초기급속등숙율이 61∼80%의 계통군에서 26.5KOHmg/100g으로 가장 높게 나타났다. 또한, 곡립형태에 있어서 현미길이는 41∼60%사이의 초기급속등숙율을 보인 계통군이 5.40mm로 가장 짧았으며, 81% 이상인 계통군이 1.80mm로 현미두께가 가장 두꺼웠으며, 현미의 형태를 나타내는 현미 길이/넓이 비에 있어서는 41∼60%사이의 계통군이 2.18로 나타났다. 3. 호화온도와 깊은 관련이 있는 알카리붕괴도에 있어서는 초기급속등숙율이 61∼80%사이가 3.40으로 가장 붕괴가 되지않는 계통군으로 나봤으며, 81%이상인 계통군은 4.31로서 붕괴가 가장 잘 되는 것으로 나타나 81%의 계통군이 호화온도가 낮은 것으로 나타났다. 4. 화학적특성, 색차색도특성 및 알카리붕괴도를 이용한 벼M/G RIL 164 계통에 대한 주성분분석의 결과 제 1주성분은 약 3.6개의 형질을 포함하고 있었으며, 제 2주성분은 약 2.1개의 형질을 포함하고 있는 것으로 밝혀졌다. 또한, 제 1주성분은 전체 변동에 대한 기여율은 약 36%이었으며, 제 4주성분까지의 전체 변동에 대한 누적 기여율은 86.4%로서 설명이 가능함을 알 수 있었다. 5. 벼 M/G RIL 164 계통의 품질평가치, 단백질함량, 아밀로오스함량, 지방산함량, 명도, a-value, b-value, 채도, 색상 및 알카리붕괴도 등의 형질에 대한 유전력 검정의 결과, 품질평가치의 유전력은 87.89%로 가장 높은 유전력을 나타내었으며, 단백질함량 > 알카리붕괴도 > 지방산함량 > 아밀로오스함량 > 색상 > 명도 > a-value > b-value의 순으로 나타났으며, 채도의 유전력은 30.62%로 가장 낮음을 알 수 있었다.

택사(澤瀉)의 재배조건(栽培條件)이 수량(收量) 및 유효성분(有效成分)의 함량(含量)에 미치는 영향(影響) (Effects of Cultural Condition on the Yield and Contents of Effective Components in Alisma orientale(Samuels.) Juzepcz.)

  • 김금숙;김정곤;성재덕;박창기;서형수;곽용호
    • 한국약용작물학회지
    • /
    • 제4권2호
    • /
    • pp.139-144
    • /
    • 1996
  • 택사(澤瀉)의 품질평가(品質評價) 기준의 하나로서 혈중콜레스테롤 강하작용(降下作用)을 하는 Alisol B-monoacetate의 적절한 추출조건(抽出條件)과 재배방법상(栽培方法相)의 정식깊이를 $0{\sim}1$, $2{\sim}4$, $5{\sim}7$, $8{\sim}10cm$ 등(等) 4수준(水準)으로 달리할 때의 수량(收量) 및 품질(品質)의 변이(變移)를 구명하고 적절한 수확시기(收穫時期) 및 구경(球莖) 크기별 일반성분(一般成分) 및 유효성분(有效成分) 함량변이(含量變移)를 구명 하였던 바 결과를 요약(要約)하면 다음과 같다. 1. Alisol B-monoacetate의 HPLC 분석(分析) 조건(條件)으로는 Nova-Pak C18 column를 $35^{\circ}C$ 일정한 온도로 유지해 줌으로써 UV 208nm에서 약(約) 20분대(分代)의 양호(良好)한 HPLC 크로마토그람 분리(分離) peak를 구하였다. 2. Alisol B-monoacetate는 $25^{\circ}C$ 진탕 추출시 0. 402%, $40^{\circ}C$, $60^{\circ}C$ 가온 환류추출시 각각(各各) 0. 425%, 0. 431% 용출(溶出)되었으며 이때 추출회수(抽出回數)는 매회(每回) 30분(分)씩 추출(抽出)하여$25^{\circ}C$ 진탕 추출시는 2회(回), $40^{\circ}C$, $60^{\circ}C$ 가온 환류추출시 는 3회(回) 추출(抽出)이 적합(適合)하였다. 3. Alisol B-monoacetate는 11월(月) 30일(日) 수확한 택사구경(澤瀉球莖)이 10월(月) 30일(日) 수확(收穫)한 것보다 함량(含量)이 0. 25% 즉 1.5배(培) 가량 크게 증가(增加)하였으나 다른 일반성분(一般成分)의 경우 조단백질(組蛋白質) 함량(含量)은 10월(月), 11월(月) 수확시 각각 평균(平均) 24. 8%, 27. 3%였고 개분함량(漑粉含量)은 10월(月), 11월(月) 각각 30. 8%, 27, 7%로서 수확시기별(收穫時期別) 함량(含量)에는 변이폭(變移幅)이 크지 않았다. 이를 종합하면 유효성분(有效成分)의 함량(含量)이 높은 11월(月) 30일(日) 수확(收穫)이 10월(月) 30일(日) 수확(收穫)보다 유리(有利)할 것으로 판단된다. 4. 구경(球莖) 크기별 약효성분(藥效成分)의 함량변이도 커서 10월(月), 30일(日) 경우 S가 0. 53%로 가장 높고 M, L 순(順)으로 구경(球莖)이 커지면서 함량(含量)이 감소(感少)하였다. 5. 정식(定植)깊이 $0{\sim}1cm$가 다른 정식(定植)깊이에 비교하여 수량(收量)이 206kg/10a로 가장 많았으며 유효성분(有效成分) 변이(變移)는 $0. 33{\sim}0. 39%$로서 정식(定植)깊이에 따라 크지않은 것을 고려하면 택사(澤瀉) 재배시(栽培時) 정식(定植)깊이는 $0{\sim}1cm$가 가장 유리(有利)할 것으로 판단된다.

  • PDF

8-10세 아동에서 III급 부정교합의 구성요소에 대한 측모 두부방사선계측학적 연구 (Cephalometric study of the components of Cl III malocclusion in children 8-10 years of age)

  • 김형돈;유대진;김일규;오성섭;최진호;오남식;김의성
    • 대한치과교정학회지
    • /
    • 제30권2호
    • /
    • pp.159-174
    • /
    • 2000
  • III급 부정교합을 치료하기 위한 여러 치료 방법들이 소개되었고 치료 방법은 술자의 선호도와 경험, 그리고 치료 성공률과 같은 술자에 관한 것이 아니라 환자가 갖고 있는 문제에 따라 선택되는 것이 바람직하며 따라서 환자가 갖고 있는 문제를 정확히 파악하는 것이 중요하다. III급 부정교합의 구성요소에 대한 연구들이 보고된 바 있으나 그 결과는 인종과 연령에 따라 각기 다양하게 보고되고 있다. 이에 본 연구는 성장 변형 치로의 대부분이 행해지는 시기인 8-10세의 우리나라 성장기 아동을 대상으로 III급 부정교합의 본질을 나타내는 다양한 구성요소들을 알아보아 환자가 갖고 있는 문제를 파악함으로써 적절한 치료 방법의 선택에 도움을 주고자 III급 부정교합을 보이는 125명의 8-10세 환자들의 측모 두부방사선규격 사진을 이용하여 McNamara방법에 의해 4가지 수평요소와 1가지 수직요소를 계측한 결과 다음과 같은 결과를 얻었다. 1. III급 부정교합은 한가지의 임상적 실체가 아닌 악골과 치아의 다양한 상태의 조합으로 구성되어 있었다. 2. 상악골의 후방 위치가 III급 부정교합자들의 가장 흔한 특징이었다. 3. 상악 전치는 대부분 후방 위치하였다. 4. 하악 전치는 대부분 전방 위치하였다. 5. 하악골은 정상적 위치인 경우가 많으나 전돌과 후퇴도 있었다. 5. 수직적으로는 과도한 성잘 양상을 보이는 경우가 많았다. 이상의 결과로 우리나라 성장기 아동의 III급 부정교합에서는 수직적 성장 억제와 상악골의 수평적 성장 촉진에 대한 치료 기법들의 적용이 많은 경우에서 더욱 필요할 것으로 생각된다.

  • PDF

논 생태계에서 영농방법에 따른 미꾸라지개체군의 변동 요인 분석 (Variation in Population Size of Mudfish by Agricultural Practices in Paddy Fields)

  • 한민수;조광진;남형규;강기경;나영은;김미란;김명현
    • 한국환경농학회지
    • /
    • 제32권1호
    • /
    • pp.24-34
    • /
    • 2013
  • 본 연구는 영농방법에 따른 미꾸라지개체군의 차이를 확인하고, 그 원인을 구명하기 위하여 전국 8지역의 유기재배 및 관행재배 논에서 미꾸라지와 저서무척추동물을 채집하였다. 조사지역에서 포획된 미꾸라지는 총 1,882개체였으며, 영농방법별로 유기재배 논에서 1,333개체, 관행재배 논에서 549개체가 조사되었고 2.4배 차이가 확인되었다. 조사지역별로는 주변 자연환경조건이 좋은 문경시와 안성시의 미꾸라지 개체수가 높게 나타났다. 조사지역에서 채집된 저서무척추동물은 3문 6강 19목 46과 68속 74종으로 유기재배 논에서 3문 6강 17목 41과 62속 66종이, 관행재배 논에서 3문 6강 18목 42과 60속 66종이 확인되었다. 우점종으로는 깔다구류, 새각류, 패형류, 요각류 등이 있었고 영농방법별로 큰 차이는 없는 것으로 확인되었다. 미꾸라지의 개체수와 저서무척추동물 중에서 미꾸라지의 주요 먹이원인 깔다구류, 요각류, 새각류를 비교해 본 결과, 깔다구류, 요각류 및 새각류의 개체수가 증가함에 따라 미꾸라지의 개체수가 증가하는 양상을 나타내었으나 새각류는 통계적으로 유의하지 않은 반면 깔다구류와 요각류는 통계적으로 유의한 결과를 나타내었다. 따라서 미꾸라지 개체수는 인위적인 간섭빈도가 높은 시가지 비율이 낮고 주요 먹이원인 깔다구류와 요각류의 출현율에 의해 영향을 받는 것으로 확인되었다. 결론적으로 논 생태계에 서식하는 미꾸라지개체군의 크기를 결정하는 요인으로는 주변의 자연환경조건과 영농방법에 의한 먹이원의 양적상태로 판단되었다.

Ecosysteme de I′Etang de Berre (Mediterranee nord-occidentale) : Caracteres Generales Physiques, Chimiques et Biologiques

  • Kim, Ki-Tai
    • 환경생물
    • /
    • 제22권2호
    • /
    • pp.247-258
    • /
    • 2004
  • Climatological, hydrological and planktonical research studies, measurements of primary production and photosynthetic efficiency from December 1976 to December 1978 have been carried out in two brackish lakes: Lake Etang de Berre and Lake Etang de Vaine located in the French Mediterranean coast, in the region of Carry-le-Rouet located on the north-west Mediterranean near Marseilles, and in fresh water inflows from 4 Rivers (Touloubre, Durance, Arc, Durancole) to Lake Etang de Berre. Physico-chemical parameters were measured for this study: water temperature, salinity, density, pH, alcalinity, dissolved oxygen (% saturation), phosphate, nitrate, nitrite, silicate etc. Diverse biological parameters were also studied: photosynthetic pigments, phaeopigments, specific composition and biomass of phytoplankton, primary pelagic production etc. Climatical factors were studied: air-temperature, solar-radiation, evaporation, direction (including strength) of winds, precipitation and freshwater volume of the four rivers. The changes in Lake ‘Etang de Berre’ ecosystem depend on the quality of the water in the Durance River, and on the effects of seawater near the entrance of the Caronte Canal. The water quality of the lake varies horizontally and vertically as a result of atmospheric phenomena, maritime currents and tides. The distribution of water temperatures is generally heterogeneous. Southeasterly winds and the Northeasterly Mistral wind are important in the origins of circulated and mixed water masses. These winds are both frequent and strong. They have, as a result, a great effect on the water environment of Lake Etang de Berre. In theory, the annual precipitation in this region is well over eight times the water mass of the lake. The water of the Durance River flows into Lake Etang de Berre through the EDF Canal, amounting to 90% of the precipitation. However, reduction of rainfall in dry seasons has a serious effect on the hydrological characteristics of the lake. The temperature in the winter is partially caused by the low temperature of fresh water, particularly that of the Durance River. The hydrological season of fresh and brackish water is about one month ahead of the hydrological season of sea water in its vicinity. The salinity of Lake Etang de Berre runs approximately 3$\textperthousand$, except at lower levels and near the entrance to the Caronte Canal. However, when the volume of the Durance River water is reduced in the summer and fall, the salinity rises to 15$\textperthousand$. In the lake, the ratio of fresh water to sea water is six to one (6:1). The large quantities of seston conveyed by rivers, particularly the Durance diversion, strongly reduce the transparency in the brackish waters. Although the amount of sunshine is also notable, transparency is slight because of the large amount of seston, carried chiefly by Tripton in the fresh water of the Durance River. Therefore, photosynthesis generally occurs only in the surface layer. The transparency progressively increases from freshwater to open seawater, as mineral particles sink to the bottom (about 1.7kg $m^{-2}a^{-1}$ on the average in brackish lakes). The concentration of dissolved oxygen and the rate of oxygen saturation in seawater (Carry-le-Rouet) ranged from 5.0 to 6.0 $m\ell$ㆍ.$1^{-1}$, and from 95 to 105%, respectively. The amount of dissolved oxygen in Etang de Berre oscillated between 2.9 and 268.3%. The monographs of phosphate, nitrate, nitrite and silicate were published as a part of a study on the ecology of phytoplankton in these environments. Horizontal and vertical distributions of these nutriments were studied in detail. The recent diversion of the Durance River into Lake Etang de Berre has effected a fundamental change in this formerly marine environment, which has had a great impact in its plankton populations. A total of 182 taxa were identified, including 111 Bacillariophyceae, 44 Chlorophyceae, and 15 Cyanophyceae. The most abundant species are small freshwater algae, mainly Chlorophyceae. The average density is about $10^{8}$ cells $1^{-1}$ in Lake Etang de Berre, and about double that amount in Lake Etang de Vaine. Differences in phytoplankton abundance and composition at the various stations or at various depths are slight. Cell biovolume V (equivalent to true biomass), plasma volume VP (‘useful’ biomass) and, simultaneously. the cell surface area S and S/V ratio through the measurement of cell dimensions were computed as the parameters of phytoplankton productivity and metabolism. Pigment concentrations are generally very high on account of phytoplankton blooms by Cyanophyceae, Chlorophyceae and Cryptophyceae. On the other hand, in freshwaters and marine waters, pigment concentrations are comparatively low and stable, showing slight annual variation. The variations of ATP concentration were closely related to those of chlorophyll a and phytoplankton blooms only in marine waters. The carbon uptake rates ranged between 38 and 1091 mg$Cm^{-2}d^{-1}$, with an average surface value of 256 mg; water-column carbon-uptake rates ranged between 240 and 2310 mg$Cm^{-2}d^{-1}$, with an average of 810, representing 290 mg$Cm^{-2}$, per year 45 000 tons per year of photosynthetized carbon for the whole lake. Gross photosynthetic production measured by the method of Ryther was studied over a 2-year period. The values obtained from marine water(Carry-le-Rouet) ranged from 23 to 2 337 mg$Cm^{-2}d^{-1}$, with a weighted average of 319, representing about 110 gCm$^{-2}$ per year. The values in brakish water (Etang de Berre) ranged from 14 to 1778 mg$Cm^{-2}d^{-1}$, with a weighted average of 682, representing 250 mg$Cm^{-2}$ per year and 38 400 tons per year of photosynthesized carbon for the whole lake.

우리나라 양곡가공공장의 현황분석 (The Profile of Milling Plants in Korea)

  • 정창주;금동혁;강화석
    • Journal of Biosystems Engineering
    • /
    • 제3권1호
    • /
    • pp.47-63
    • /
    • 1978
  • This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

  • PDF