• 제목/요약/키워드: variance errors.

검색결과 237건 처리시간 0.027초

Accuracy of linear measurement using cone-beam computed tomography at different reconstruction angles

  • Nikneshan, Sima;Aval, Shadi Hamidi;Bakhshalian, Neema;Shahab, Shahriyar;Mohammadpour, Mahdis;Sarikhani, Soodeh
    • Imaging Science in Dentistry
    • /
    • 제44권4호
    • /
    • pp.257-262
    • /
    • 2014
  • Purpose: This study was performed to evaluate the effect of changing the orientation of a reconstructed image on the accuracy of linear measurements using cone-beam computed tomography (CBCT). Materials and Methods: Forty-two titanium pins were inserted in seven dry sheep mandibles. The length of these pins was measured using a digital caliper with readability of 0.01 mm. Mandibles were radiographed using a CBCT device. When the CBCT images were reconstructed, the orientation of slices was adjusted to parallel (i.e., $0^{\circ}$), $+10^{\circ}$, $+12^{\circ}$, $-12^{\circ}$, and $-10^{\circ}$ with respect to the occlusal plane. The length of the pins was measured by three radiologists, and the accuracy of these measurements was reported using descriptive statistics and one-way analysis of variance (ANOVA); p<0.05 was considered statistically significant. Results: The differences in radiographic measurements ranged from -0.64 to +0.06 at the orientation of $-12^{\circ}$, -0.66 to -0.11 at $-10^{\circ}$, -0.51 to +0.19 at $0^{\circ}$, -0.64 to +0.08 at $+10^{\circ}$, and -0.64 to +0.1 at $+12^{\circ}$. The mean absolute values of the errors were greater at negative orientations than at the parallel position or at positive orientations. The observers underestimated most of the variables by 0.5-0.1 mm (83.6%). In the second set of observations, the reproducibility at all orientations was greater than 0.9. Conclusion: Changing the slice orientation in the range of $-12^{\circ}$ to $+12^{\circ}$ reduced the accuracy of linear measurements obtained using CBCT. However, the error value was smaller than 0.5 mm and was, therefore, clinically acceptable.

도심지 미진동 제어발파에서 진동분석을 통한 안전 발파설계에 관한 연구(II) - 진동측정 자료의 통계적 분석을 위주로 - (A Study on the Safe Blasting Design by Statistical Analysis of Ground Vibration for Vibration Controlled Blasting in Urban Area (II))

  • 김영환;안명석;박종남;강대우;이창우
    • 화약ㆍ발파
    • /
    • 제18권2호
    • /
    • pp.7-13
    • /
    • 2000
  • 본 연구지역은 안산암지역으로 지반의 구조특성을 잘 나타내는 균열계수로서 암반특성을 표현하였고 발파진동식을 추정하는데 있어서 결정계수를 높여 오차를 최소화하였다. 측정자료 를 누적분석하였을 때 결정계수가 0.002~0.531로서 신뢰하기 어려웠으며 동일 장약량을 가진 동일거리군 군별 평균진동속도로서 회귀분석한 경우 결정계수는0.493~0.531으로 그다지 높지 않은 결과가 나왔고 절사평균을 이용한 결정계수는 0.307~0.487로서 역시 신뢰하기 어려운 결과를 도출했다 또한 샘플수를 가중치로 적용하는 방법의 결정계수는 0.644~0.752로서 본 연구의 적용 통계적 방법중 가장 높은 결과를 도출하였으며, 진동속도 표준편차의 영향을 가중치로 적용하는 방법의 결정계수는 0.516~0.668이었고 진동속도 분산의 영향을 가중치로 적용하는 방법의 결정계수는 0.516~0.685이었다. 그러므로 발파진동추정식을 산출할 때 동일장약량을 가지는 15m이내의 동일거리군에서의 진동평균속도에 가중치를 적용하여 얻은 회귀분석 결과가 가장 신뢰성이 높았다. 이 때 자승근일 때의 발파진동상수 $K_{95}$는 317.4, n은 -1.66이었고, 삼승근일 때의 발파진동상수 $K_{95}$는 209.9,n은 -1.60이었고 자승근과 삼승근의 교차점분석시 허용진동속도 4cm/sec에서 교차점은 31m이므로 발파지점으로부터의 거리가 31m이내는 삼승근 적용이 신뢰성이 높고, 31m이상일 때는 자승근 적용이 신뢰성이 높은 것으로 판단되었다.

  • PDF

경험적 영향함수와 표본영향함수의 차이 및 보정에 관한 연구 (A study on the difference and calibration of empirical influence function and sample influence function)

  • 강현석;김홍기
    • 응용통계연구
    • /
    • 제33권5호
    • /
    • pp.527-540
    • /
    • 2020
  • 이상치에 대한 적절한 선별과 배제없이 모든 데이터를 종합적으로 분석하게 되는 경우 데이터 분석을 통해 얻은 결과의 신뢰성과 해석의 일반성에 치명적인 위협을 받을 수 있다. 따라서 데이터의 분석 과정에서 이러한 이상치를 판별하고, 이상치가 통계량, 통계적 모형에 어떠한 영향을 주는 지에 대한 분석은 매우 중요한 일이라 할 수 있다. Hampel이 영향함수를 활용하여 이상치를 판별할 수 있는 방법을 소개한 이후, 이상치를 판별하기 위한 방법론으로 영향함수가 폭넓게 활용되어 왔다. 영향함수에는 경험적 영향함수와 표본영향함수가 있으며, 경험적 영향함수를 활용해 표본영향함수를 근사 추론하여 하나의 관측값이 제거되었을 때 통계량에 미치는 영향을 예측하는 방법론이 주로 활용되었다. 본 연구에서는 표본평균, 표본분산, 표본표준편차의 표본영향함수 유도를 통해 경험적 영향함수와 표본영향함수의 차이를 살펴 본다. 또한 경험적 영향함수로 표본영향함수를 근사하는 과정에서 발생하는 오차를 줄이기 위해 경험적 영향함수의 보정으로 표본영향함수를 근사 추론하는 방법을 제안하고, 모의실험을 통해 제안한 추론 방법의 타당성을 확인한다.

디스플레이에서 배경의 밝기와 색채 자극의 크기에 따른 컬러 어피어런스 모델링 (Colour Appearance Modelling based on Background Lightness and Colour Stimulus Size in Displays)

  • 홍지영
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권4호
    • /
    • pp.43-48
    • /
    • 2018
  • 본 연구는 배경의 밝기와 색채 자극의 크기에 따라 색채를 동일하게 지각 할 수 있도록 디지털 색채 재현을 목적으로 수행되었다. 디스플레이의 진화에 따라 다양한 크기의 디스플레이 디바이스에서 보다 정확한 색채와 향상된 영상 재현은 화질에 전반적인 영향을 미치고 있다. 본 연구는 디지털 미디어 환경에서 시각적 특성을 반영한 디지털 색채 재현을 위해 중심와 시각과 주변시 시각의 특성을 분리하고 배경의 밝기와 색채 자극의 크기에 따른 기존 연구결과를 바탕으로 컬러 어피어런스 모델링을 계발하였다. 도출된 실험 결과를 바탕으로 분산분석을 통해 배경의 밝기와 색채 자극의 크기에 따른 컬러 어피어런스 모델링을 제안하였으며 제안된 모델을 근거로 하여 알고리즘 및 모델링 검증 작업을 실시하였다. 또한 디스플레이 접목을 위해 제안한 모델을 이용하여 실질적인 색채 제어 시스템을 구성하고 복합적인 화상이 입력 영상으로 제시될 경우의 방법도 제안하였다. 본 연구를 통해 입력 영상이 디스플레이 크기에 따라 전환 될 때 발생할 수 있는 색채 변환 오류를 인간의 시지각 관점에서 해결 하여 보다 정확한 색채 표현과 향상된 화질 영상 재현이 가능하다.

청각장애 아동과 일반 아동의 마찰음에 나타난 음향음성학적 특성 비교 (Comparison of Acoustic Phonetic Characteristics of Korean Fricative Sounds Pronounced by Hearing-impaired Children and Normal Children)

  • 김윤하;김은연;장승진;최예린
    • 말소리와 음성과학
    • /
    • 제6권2호
    • /
    • pp.73-79
    • /
    • 2014
  • Alveolar fricative sounds /s/ and /s'/ are learned last for normal children in the speech development process for Koreans. These are especially difficult to articulate for hearing-impaired children often causing articulation errors. The acoustic phonetic evaluation uses testing tools to provide indirect and object information. These objective resources can be compared with standardized resources on speech when interpreting the results of a test. However, most previous studies in Korea did not consider acoustic studies that used the spectrum moment values of hearing-impaired children. Therefore, this study was conducted to compare the characteristics of hearing-impaired children's pronunciation of fricative sounds using spectrum moment values. For this purpose, the study selected a total of 10 hearing-impaired children (5 boys and 5 girls) currently in 3rd or 5th grade and attending one of the elementary schools in Seoul or Gyeonggi-do. For the selection process, their age, type of hearing aid, implantation of hearing aid (CI) before two years of age, hearing capacity (dB) before and after wearing the hearing aid, duration of speech rehabilitation, and time of learning alveolar fricative sounds were all considered. Also, 10 normal children (5 boys and 5 girls) were selected among 3rd or 5th grade students attending one of the elementary schools in Seoul or Gyeonggi-do. The subjects were asked to read the carrier sentence, "I say _______," including a list of 12 meaningless syllables composed of CV and VCV syllables, including alveolar fricative sounds /s/ and /s'/ and vowels /a/, /i/, and /u/. The recorded resources were processed through the Time-frequency Analysis Software Program to measure M1 (mean), M2 (variance), M3 (skewness), and M4 (kurtosis) of the fricative noise. No significant differences were found when comparing spectrum threshold values in the acoustic phonetic characteristics of hearing-impaired children and normal children in alveolar fricative sound pronunciation according to vowels /a/, /i/, and /u/, alveolar fricative sounds /s/ and /s'/, and syllable structure (CV, VCV) other than, for M3 in the comparison of groups according to disability. In the comparison of syllable structures, there were statistically significant differences in M1, M2, M3, and M4 with clinical significance. However, there was no significant difference in results when comparing the alveolar fricative sounds according to the vowels.

가산자료모형을 기초로 한 통행행태의 한계효과분석 (Marginal Effect Analysis of Travel Behavior by Count Data Model)

  • 장태연
    • 대한교통학회지
    • /
    • 제21권3호
    • /
    • pp.15-22
    • /
    • 2003
  • 교통수요예측의 통행발생단계에서 일반적으로 선형회귀모형이 활용되고 있다. 이러한 선형회귀모형은 여러가지 방법론적 한계성과 실용적 지속성을 가지지 못하는 경향을 보인다. 첫째, 종속변수로 이용되는 통행발생의 경우 비음정수(non-negative integer : 0, 1, 2 등)의 이산분포특징을 보이나, 선형회귀모형에서는 종속변수가 연속확률분포 인 정규분포의 특징을 가진 것으로 가정한다. 둘째, 모형이 자료측정에 적용되었을 때 음(-)의 결과를 산정 할 수 있으며, 독립변수의 증감에 따라 결과 값을 너무 높게 혹은 낮게 예측하는 경우가 있다 셋째, 예측된 값이 정상적인 범위 내에 있을 지라도 예측된 통행수만을 제시 할 뿐, 통행발생빈도에 대한 이산확률분포는 제공하지 않는다. 이같은 한계점을 극복하기 위해 주로 활용되어온 가산자료모형이 포와송모형이다. 그러나 포와송모형의 경우 자료의 평균과 분산이 동일하다는 가정하에 활용되고 있어 자료상에 과산포가 존재할 경우 오차를 과소평가 할 경향이 높아 모형의 신뢰성에 문제가 발생됨으로 기타 다른 가산자료모형의 적용을 고려해야한다. 연구에서는 과산포검정을 통해 통행발생빈도상에 과산포 존재를 밝혀내고 포와송모형의 부적합함을 제시하였으며 Vuong 검정을 통해 최적의 모형을 선정하였다. 선정된 모형을 대상으로 우도비검정과 Theil 부등계수에 의해 모형의 신뢰도와 정확성을 조사하였다. 최종적으로 가구의 사회경제적 속성의 변화에 따른 통행발생의 변화를 측정하기 위한 민감도 분석을 실시하였다.

뇌성마비 마비말장애 성인의 파찰음 실현 양상 분석 (Acoustic analysis of Korean affricates produced by dysarthric speakers with cerebral palsy)

  • 문지현;김선희;정민화
    • 말소리와 음성과학
    • /
    • 제13권2호
    • /
    • pp.45-55
    • /
    • 2021
  • 본 연구는 경직형 경도-중등도 뇌성마비 마비말장애 성인이 산출한 한국어 파찰음의 음향학적인 특징을 분석한다. 한국어의 마찰음과 파찰음은 조음오류가 빈번하게 발생하는 자음인데, 기존 연구들은 마찰음에만 집중했다. 따라서 본 연구에서는 마비말장애 화자가 산출한 파찰음을 음향학적으로 분석하고자 한다. QoLT_SPEECH_2014 데이터베이스 내에서 파찰음 /tɕ, tɕh, ͈tɕ/이 어두 초성 및 어중 초성에 위치하는 단어를 선정하여 경도-중등도 경직형 장애 남성 화자 6명과 비장애 남성 화자 5명의 발화 데이터를 분석에 사용하였다. 한국어의 파찰음의 특성을 고려하여 파찰음의 음향학적 특징을 나타내는 매개변수를 선정하여 분석을 시행하였다: 마찰구간의 길이, 묵음 구간의 길이, 무게중심, 분산, 왜도, 첨도, 중심적률. 분석 결과는 다음과 같다: 1) 어중 초성 파찰음에서 마비말장애인이 유의하게 긴 마찰구간의 길이를 보였다, 2) 마비말장애인이 유의하게 긴 묵음 구간의 길이를 보였다, 3) 무게중심의 경우 두 집단 간의 유의한 차이가 존재하지 않았다, 4) 마비말장애인이 유의하게 큰 왜도 값을 보였다, 5) 마비말장애인이 유의하게 큰 중심적률 값을 보였다. 본 연구는 마비말장애인이 산출한 파찰음의 특성을 분석하고, 비장애인이 산출한 파찰음과의 차이를 밝혔다.

담수산 지각류 Simocephalus serrulatus (Koch, 1841) 생체량 산정 방법 연구 (Study of Biomass Estimation Methods for the Freshwater Cladoceran Species, Simocephalus serrulatus (Koch, 1841))

  • 오혜지;홍근혁;최예림;장광현
    • 생태와환경
    • /
    • 제56권2호
    • /
    • pp.161-171
    • /
    • 2023
  • Simocephalus spp.는 수생식물이 발달한 호소의 수변부 및 습지 서식처에서 우점 출현하는 중대형 지각류로, 해당 서식처의 동물플랑크톤 군집 생체량(biomass)에 기여하는 정도가 높아 먹이망 내 생물학적 상호작용을 기반으로 한 물질 순환을 이해하기 위해서는 Simocephalus종들의 생체량 산정이 중요하다. 본 연구에서는 S. serrulatus의 생체량 추정에 사용되어지고 있던 기존의 선행 산정식을 검토하고, 현미경 디지털 카메라와 미세 저울 같은 장비를 사용하여 개체의 다양한 체측값(체장, 너비 및 면적)과 생체량(건중량)을 직접 측정하여 상호 간 회귀 분석을 실시하였다. 국내 『생물측정망 조사 및 평가지침 - 보구간편』에서 제시하고 있는 Simocephalus spp.의 생체량 산정식(Kawabata and Urabe, 1998)을 사용하여 S. serrulatus 생체량을 추정했을 때, Lemke and Benke (2003)에 의해 개발된 S. serrulatus종 특이적 생체량 산정식 대비 추정치-실측치 간 오차가 상대적으로 크게 나타났으며, 두 산정식에서 모두 개체 체장 증가에 따른 오차 증가 및 유사 체장 개체 간 오차 편차 증가 경향이 보여졌다. 체측값별로 건중량과 회귀 분석을 실시한 결과, S. serrulatus 생체량 추정에 가장 적합한 산정식은 너비-건중량 지수 회귀식(R2=0.9555)으로 도출되었다. 이 같은 종 특이적 생체량 산정식의 검토 및 개발 연구는 수생태계 먹이망 내 동물플랑크톤 역할 및 기능 파악하는 데 도구(tool)로써 활용될 수 있다.

Genetic parameters of milk and lactation curve traits of dairy cattle from research farms in Thailand

  • Pangmao, Santi;Thomson, Peter C.;Khatkar, Mehar S.
    • Animal Bioscience
    • /
    • 제35권10호
    • /
    • pp.1499-1511
    • /
    • 2022
  • Objective: This study was aimed to estimate the genetic parameters, including genetic and phenotypic correlations, of milk yield, lactation curve traits and milk composition of Thai dairy cattle from three government research farms. Methods: The data of 25,789 test-day milk yield and milk composition records of 1,468 cattle from lactation 1 to 3 of Holstein Friesian (HF) and crossbred HF dairy cattle calved between 1990 and 2015 from three government research farms in Thailand were analysed. 305-day milk yield was estimated by the Wood model and a test interval method. The Wood model was used for estimating cumulative 305-day milk yield, peak milk yield, days to peak milk yield and persistency. Genetic parameters were estimated using linear mixed models with herd, breed group, year and season of calving as fixed effects, and animals linked to a pedigree as random effects, together with a residual error. Univariate models were used to estimate variance components, heritability, estimated breeding values (EBVs) and repeatability of each trait, while pairwise bivariate models were used to estimate covariance components and correlations between traits in the same lactation and in the same trait across lactations. Results: The heritability of 305-day milk yield, peak milk yield and protein percentage have moderate to high estimates ranging from 0.19 to 0.45 while days to peak milk yield, persistency and fat percentage have low heritability ranging from 0.08 to 0.14 in lactation 1 cows. Further, heritability of most traits considered was higher in lactation 1 compared with lactations 2 and 3. For cows in lactation 1, high genetic correlations were found between 305-day milk yield and peak milk yield (0.86±0.07) and days to peak milk yield and persistency (0.99±0.02) while estimates of genetic correlations between the remaining traits were imprecise due to the high standard errors. The genetic correlations within the traits across lactation were high. There was no consistent trend of EBVs for most traits in the first lactation over the study period. Conclusion: Both the Wood model and test interval method can be used for milk yield estimates in these herds. However, the Wood model has advantages over the test interval method as it can be fitted using fewer test-day records and the estimated model parameters can be used to derive estimates of other lactation curve parameters. Milk yield, peak milk yield and protein percentage can be improved by a selection and mating program while days to peak milk yield, persistency and fat percentage can be improved by including into a selection index.

전자파표면유속계의 측정 각도에 따른 평수기 유속 측정 정확도 분석 (Accuracy evaluation of microwave water surface current meter for measurement angles in middle flow condition)

  • 손근수;김동수;김경동;김종민
    • 한국수자원학회논문집
    • /
    • 제53권1호
    • /
    • pp.15-27
    • /
    • 2020
  • 하천 유량관측은 수자원의 관리를 위해 활용되는 기초적이고 대표적인 자료로 하천에서 정확한 유량을 관측하는 것은 중요하다. 따라서 최근에는 다양한 첨단 장비들이 개발되어 전통적인 하천의 유량관측을 대체하거나 보완하고 있다. 여러 최신 장비들 중 전자파표면유속계는 홍수기와 같이 하천에 접근하여 직접유량계측이 위험하고 정확도 확보가 어려울 경우전자파를 이용하여 비접촉식으로 유량을 계측하는 장비로 홍수기 및 평갈수기에도 하천 유량계측에 활용되기 시작하였다. 전자파표면유속계는 사용법이 간단하고 간접적으로 유속을 측정하기 때문에 기존의 직접측정 방법에 비해 안전한 장점이 있어 현재 국내에서는 홍수기 또는 접근이 어려운 하천의 유속 측정을 위해 사용되고 있다. 국내에서는 1993년 유량측정 장치 개발을 위해 전자파표면유속계(MWSCM; Microwave Water Surface Current Meter)를 개발을 연구를 수행하였고, 최근에는 국내에서 개발된 전자파표면유속계을 활용하여 유량측정을 위해 사용되고 있다. 하지만 국내에서 개발된 전자파표면유속계가 실제 하천에서 유속측정의 정확도에 대한 연구는 부족한 실정이다. 전자파표면유속계는 기기로부터 전자파를 이용해 유속을 측정하기 때문에 수직각과 편각과 같은 각도 변화에 따라 측정정확도가 바뀔 수 있고, 전자파표면유속계 본체에서 발사되는 전자파의 측정영역에 따라 유속측정에 오차가 발생할 수 있다. 본 연구에서는 국내에서 개발 전자파표면유속계의 측정정확도를 분석하기 위해서 실제하천과 유사한 실규모 하천수로에서 수직각과 편각을 변화시키며 측정을 수행하여 수직각과 편각에 변화에 따른 유속측정 정확도를 분석하였다. 그리고 전자파표면유속계의 측정영역의 고려를 통해서 측정영역에 따른 유속측정결과를 분석하였다. 유속측정 결과를 통해서 수직각 15° 이하에서는 유속측정의 오차가 커지게 되는 것으로 나타났고, 편각이 커질수록 유속측정의 결과의 변동계수가 커지는 것으로 나타났다. 그리고 편각에 따른 오차의 영향은 전자파표면유속계의 측정영역에 따라 결과가 달라지는 것으로 나타났다.