• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1992.04a
• /
• pp.7-12
• /
• 1992

The variable node plate bending element, ie, the element with one or two additional mid-side nodes is used in the analysis of mat foundation to generate the nearly ideal grid model in which more nodes are defined near the column location. The plate bending element used in this study is the one based on Mindlin/Reissner plate theory with substitute shear strain field and the nodal stresses of that element are obtained by the local smoothing technique. The interaction of the soil material with the mat foundation is modeled with Winkler springs connected to the nodal points in the mat model. The vertical stiffness of the soil material are represented in terms of a modulus of subgrade reaction and are computed in the same way as to the computation of consistent nodal force of uniform surface loading. Several mesh schemes were proposed and tested to find the most suitable scheme for mat foundation analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.937-945
• /
• 2009

In this paper, we investigate into the existence and various properties of absorbing sets in regular LDPC codes with variable node degree three. Also, we figure out the critical number of some absorbing sets that are believed to be the major cause of error floor in (3,5) Tanner LDPC codes.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.591-598
• /
• 2014

This paper proposes a new min-sum algorithm for low-density parity-check decoding. In this paper, we first define the negative and positive effects of the received signal-to-noise ratio (SNR) in the min-sum decoding algorithm. To improve the performance of error correction by considering the negative and positive effects of the received SNR, the proposed algorithm applies adaptive scaling factors not only to extrinsic information but also to a received log-likelihood ratio. We also propose a combined variable and check node architecture to realize the proposed algorithm with low complexity. The simulation results show that the proposed algorithm achieves up to 0.4 dB coding gain with low complexity compared to existing min-sum-based algorithms.

• The Korean Journal of Applied Statistics
• /
• v.18 no.3
• /
• pp.661-671
• /
• 2005

The aim of this study is to propose a clustering method, called tree-structured clustering, by recursively partitioning continuous multivariate dat a based on overall $R^2$ criterion with a practical node-splitting decision rule. The clustering method produces easily interpretable clustering rules of tree types with the variable selection function. In numerical examples (Fisher's iris data and a Telecom case), we note several differences between tree-structured clustering and K-means clustering.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.625-628
• /
• 2011

Dynamic sensor network(DSN) technology which is based on swarming flight type air node offers analyzed and acquired information on target data gathered by air nodes in rotation flight or 3 dimension array flight. Efficient operation of dynamic sensor network based on air node is possible when problems of processing time, data transmission reliability, power consumption and intermittent connectivity are solved. Delay tolerant network (DTN) can be a desirable alternative to solve those problems. DTN using store-and-forward message switching technology is a solution to intermittent network connectivity, long and variable delay time, asymmetric data rates, and high error rates. However, all processes are performed at the bundle layer, so high power consumption, long processing time, and repeated reliability technique occur. DSN based on swarming flight type air node need to adopt store-and-forward message switching technique of DTN, the cancelation scheme of repeated reliability technique, fast processing time with simplified layer composition.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.629-630
• /
• 2008

MANET is depended on the property as like variable energy, high degree of mobility, location environments of nodes etc. So, in this paper, we propose an algorithm techniques which is TICC (Time Interval Clustering Control) based on energy value in property of each node for solving cluster problem. It provides improving cluster energy efficiency how can being node manage to order each node's energy level. TICC is clustering method. It has shown that Node's energy efficiency and life time are improved in MANET.

• The KIPS Transactions:PartA
• /
• v.8A no.2
• /
• pp.117-124
• /
• 2001

At NOW (Networks Of Workstations), the load sharing is very important role for improving the performance. The known load sharing strategy is fixed-granularity, variable-granularity and adaptive-granularity. The variable-granularity algorithm is sensitive to the various parameters. But Send algorithm, which implements the fixed-granularity strategy, is robust to task granularity. And the performance difference between Send and variable-granularity algorithm is not substantial. But, in Send algorithm, the computing time and the communication time are not overlapped. Therefore, long latency time at the network has influence on the execution time of the parallel program. In this paper, we propose the preSend algorithm. In the preSend algorithm, the master node can send the data to the slave nodes in advance without the waiting for partial results from the slaves. As the master node sent the next data to the slaves in advance, the slave nodes can process the data without the idle time. As stated above, the preSend algorithm can overlap the computing time and the communication time. Therefore we reduce the influence of the long latency time at the network and the execution time of the parallel program on the NOW. To compare the execution time of two algorithms, we use the $320{\times}320$ matrix multiplication. The comparison results of execution times show that the preSend algorithm has the shorter execution time than the Send algorithm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.8-14
• /
• 2013

A low density parity check (LDPC) decoder provides a most powerful error control capability for mobile communication devices and storage systems, due to its performance being close to Shannon's limit. In this paper, we introduce an efficient overlapped LDPC decoding algorithm using a upper dual-diagonal parity check matrix structure. By means of this algorithm, the LDPC decoder can concurrently execute parts of the check node update and variable node update in the sum-product algorithm. In this way, we can reduce the number of clock cycles per iteration as well as reduce the total latency. The proposed decoding structure offers a very simple control and is very flexible in terms of the variable bit length and variable code rate. The experiment results show that the proposed decoder can complete the decoding of codewords within 70% of the number of clock cycles required for a conventional non-overlapped decoder. The proposed design also reduces the power consumption by 33% when compared to the non-overlapped design.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.257-262
• /
• 2001

A new WDM-based protocol for scheduling a variable-length message is proposed in this paper Two control channels, reservation slot and control slot, are used to coordinate transmission and diminish the collisions of packet to minimize the across delay. When an idle control slot is available, control packet is transmitted on that slot and message is transferred. And the node continues to transmit its control packet through the corresponding slot every cycle, until the message is completely transmitted. If any control slot is not available, the node schedules the transmission time of message in earliest available time using reservation slots. The proposed scheduling algorithm shows better performance and lower access delay.

• Wind and Structures
• /
• v.1 no.1
• /
• pp.111-125
• /
• 1998

This paper deals with the development of variable-node element and its application to the adaptive h-version mesh refinement-recovery for the incompressible viscous flow analysis. The element which has variable mid-side nodes can be used in generating the transition zone between the refined and unrefined element and efficiently used for the construction of a refined mesh without generating distorted elements. A modified Guassian quadrature is needed to evaluate the element matrices due to the discontinuity of derivatives of the shape functions used for the element. The penalty function method which can reduce the number of the independent variables is adopted for the purpose of computational efficiency and the selective reduced integration is carried out for the convection and pressure terms to preserve the stability of solution. For the economical analysis of transient problems in which the locations to be refined are changed in accordance with the dynamic distribution of velocity gradient, not only the mesh refinement but also the mesh recovery is needed. The numerical examples show that the optimal mesh for the finite element analysis of a wind around the structures can be obtained automatically by the proposed scheme.