• Title/Summary/Keyword: van der Meer

Search Result 20, Processing Time 0.023 seconds

Hydraulic Model Test for Armor Stability of Rubble-Mound Breakwaters (경사식방파제의 피복재 안정성에 대한 비교 실험)

  • 이종인
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.15 no.4
    • /
    • pp.249-258
    • /
    • 2003
  • In this study, the stability of armor blocks of rubble-mound breakwaters is investigated based on the 2-dimensional hydraulic model test with irregular waves. Amor blocks were used the three types; rock, cube and tetrapod. And Hudson formula and van der Meer formula which are used for calculating the weight of armor blocks are considered. Hudson formula was developed from regular wave tests, while van der Meer formula was developed from irregular wave tests. The purpose of this paper is to compare and test two selected stability formulas using the experimental data.

Comparison of Accuracy of Stability Formulas for Breakwater Armor Stones (방파제 피복석 안정 공식의 정밀도 비교)

  • 서경덕;유동훈
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.15 no.3
    • /
    • pp.186-189
    • /
    • 2003
  • Various empirical formulas have been developed to describe the stability of breakwater armor stones. The Hudson formula is known to have needs to be refined in many ways. but it is most widely used because of its simplicity. The van der Meer formula is sometimes used for the cross-check, but it is not very popularly used due to its complexity and the uncertainty of the relevant parameters. Recently, on the other hand, Yoo(2003) proposed a formula of a simple form using a new non-dimensional number which is called 'action slope' (abbreviated as Yoo formula hereinafter). In this study, in order to provide coastal engineers with some idea of the use of these formulas, their accuracies were estimated by comparing with the experimental data reported by van der Meer in 1987 and 1988. It was found that the van der Meer formula showed the highest accuracy, while the Hudson formula of very low accuracy needed considered judgment on its use. On the other hand, the Yoo formula of slightly lower accuracy but simpler expression than the van der Meer formula seems to be able to be used in engineering practice if a slightly higher safety factor is taken.

Determination of Minimum Weight of Armor Unit of Rubble-Mound Breakwater (방파제 사석 중량 산정)

  • 유동훈;이대석;구석근
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.13 no.4
    • /
    • pp.319-326
    • /
    • 2001
  • This paper reports on a recent investigation to determine criteria for the design of rubble-mound breakwaters. Existing theories and empirica] equations have been carefully reviewed and a new relation is proposed for the determination of optimum weight of armor unit of rubble-mound breakwater. A new parameter is introduced into the new semi-theoretical equation, which is closely related with the surface particle velocity of wave motion. The laboratory data reported by van der Meer(1987) were used for the determination of proper relations of empiricat parameters introduced into the new empirical equation.

  • PDF

Breakwater Design against Flood and Typhoon (풍수해에 대비한 방파제 설계기법)

  • 김인호;유동훈
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.16 no.2
    • /
    • pp.103-107
    • /
    • 2004
  • Empirical equation has been developed by employing the new non-dimensional physical number 'wave action slope' for the estimation of breakwater armor weight. Van der Meer(1987) introduced Iribarren number for the same purpose, but his equation shows very different trend of distribution with the condition of Iribarren number. On the other hand the equation related with wave action slope keeps the same trend of distribution over the whole region. When the parameter is related to the Iribarren number, the equation of wave action slope has a very high accuracy.

Probabilistic Assessment of Wave Overtopping of Seawall at Busan, Korea (부산 신항 방파제의 월파 확률 평가)

  • Qie, Luwen;Choi, Byung-Ho;Xie, ShiLeng
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.20 no.2
    • /
    • pp.176-183
    • /
    • 2008
  • In this paper, three classical overtopping models: Owen model, Van der Meer & Janssen model and Hedges & Reis model were used to calculate the failure probability of wave overtopping of seawalls. Among of them, the Hedges & Reis model was regarded as a moderate method to analyze the failure probability of wave overtopping of seawalls and the probabilistic assessments of wave overtopping were carried out for a constructing seawall at Busan in Korea by Level II and Level III reliability methods. Considering the cost of construction, an appropriate crest level was proposed for a certain rate of wave overtopping at a lower failure probability.

Empirical Formula for Wave Runup of Rubble-Mound Structure Covered by Tetrapods: 1:1.5 Slope Condition (TTP로 피복된 경사식구조물의 처오름높이 산정식: 사면경사 1:1.5 조건)

  • Lee, Jong-In;Bae, Il-Ro
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.35 no.4
    • /
    • pp.845-852
    • /
    • 2015
  • The runup height is an important design parameter to determine the crest elevation of coastal structures and seawalls. In this study, two dimensional wave runup tests for rubble-mound structure covered by tetrapods were conducted. Incident waves at the toe include nonbreaking, breaking and broken random wave conditions. A empirical formula to predict runup elevation of rubble-mound structure with 1:1.5 front slope was proposed on the basis of physical model test results using a surf similarity parameter. The test results from this study were compared with those from van der Meer and Stam(1992).

Reliability Design of Breakwater Armor Blocks Considering Variability in Wave Direction (파향의 변동성을 고려한 방파제 소파블록의 신뢰성 설계)

  • 서경덕;권혁민;윤현덕
    • Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
    • /
    • 2002.08a
    • /
    • pp.82-91
    • /
    • 2002
  • 방파제에 대한 신뢰성 설계 방법은 유럽과 일본을 중심으로1980년대 중반 이후로 발전되어 왔다. 유럽에서는 van der Meer(1988a)가 방파제 피복재의 설계에 확률론적인 방법을 도입하였고, Burcharth(1991)는 사석방파제에 대하여 부분안전계수(partial safety factor)를 이용한 신뢰성 설계 방법을 제시하였다 최근 Burcharth and Sørensen(1999)은 PIANC (Permanent International Association of Navigation Congress) Working Groups의 결과를 요약하여 사석방파제와 직립방파제에 대한 부분안전계수들을 확립하였다. (중략)

  • PDF

해안구조물의 비용최적화 설계 Algorithm 개발

  • 강윤구;김종욱;이익효;유청노
    • Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
    • /
    • 1991.07a
    • /
    • pp.55-59
    • /
    • 1991
  • 사석방파제 등의 해안구조물 설계에 규칙파를 대상으로 한 다수의 설계식이 제안되어 왔다(예를 들면 Hudson, 1959; C.E.R.C., 1984 등). 또한 최근에는 불규칙파를 대상으로 한 설계식이 제안되었고, 이에는 Ryu and Sawaragi(1986), Van der meer(1987)등의 식이 있다. 이들 설계식은 모두 결정론적 안정성 평가에 주안을 두고 있다.(중략)

  • PDF

불규칙외력과 사석구조물의 안정성

  • 유청로;박종화;김현주;장재호
    • Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
    • /
    • 1993.07a
    • /
    • pp.78-81
    • /
    • 1993
  • 사석구조물의 안정성에 관한 많은 연구성과가 보고되어 왔지만 안정성 변화의 주요 원인에 대한 정량적인 평가는 아직도 미흡한 실정이다. 특히 불규칙 해파의 통계적 특성과 파군 및 고파의 지속시간 등의 외력특성에 대한 영향은 Ryu and Sawaragi (1986)나 Van der meer(1986) 등에 의해 검토된바 있지만 종합적으로 평가한 예는 찾아보기 힘들다. 또한 구조물의 건설장소, 구조물의 제원 및 시공방법 등에 따라 안정성은 크게 변화하므로 이들의 영향을 보다 체계적으로 평가할 수 있는 설계algorithm이 요구되고 있다. (중략)

  • PDF