• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.52-59
• /
• 2010

To examine among patients with vertebral compression fracture the extent to which signal-to-noise ratio (SNR) and Apparent Diffusion Coefficient (ADC) values at the lumbar vertebral compression fracture site vary on diffusion-weighted MR images according to varying b values on the 1.5T MR device. Diffusion-weighted MR images of 30 patients with compression fracture due to chronic osteoporosis who underwent vertebral MRI from Jan. 2008 to Nov. 2009 were respectively obtained using a 1.5-T MR scanner with the b values increased from 400, 600, 800, 1,000 to $1,200\;s/mm^2$. For diffusion-weighted MR images with different b values, the signal-to-noise ratio (SNR) was assessed at three sites: the site of compression fracture of the lumbar vertebral body at L1 to L5, and both the upper and lower discs of the said fracture site, while for ADC map images with different b values, the SNR and ADC were respectively assessed at those three sites. As a quantitative analysis, diffusion-weighted MR images and ADC map images with b value of $400\;s/mm^2$ (the base b values) were respectively compared with the corresponding images with each different b value. As far as qualitative analysis is concerned, for both diffusion-weighted MR and ADC map images with b value of $400\;s/mm^2$, the extent to which signal intensity values obtained at the site of compression fracture of the lumbar vertebral body at L1 to L5 vary according to the increasing b values were examined. The quantitative analysis found that for both diffusion-weighted MR and ADC map images, as the b values increased, the SNR were relatively lowered at all the three sites, compared to the base b value. Also, it was found that as the b values increased, ADC valueswere relatively lowered at all the three sites on ADC map images. On the other hand, the qualitative analysis found that as the b values increased to more than $400\;s/mm^2$, the signal intensity gradually decreased at all the sites, while at the levels of more than $1,000\;s/mm^2$, severe image noises appeared at all of the three sites. In addition, higher signal intensity was found at the site of compression fracture of the lumbar vertebral body than at the discs. Findings showed that with the b value being increased, both the signal-to-noise ratio (SNR) and Apparent Diffusion Coefficient (ADC) values gradually decreased at all the sites of the lumbar vertebral compression fracture and both the upper and lower discs of the fracture site, suggesting that there is a possibility of a wider range of applications to assessment of various vertebral pathologies by utilizing multi b values in the diffusion-weighted MRI examination.

• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.78-92
• /
• 2016

This study investigated the quality characteristics of white pan bread with banana addition. This analysis was through mixograph and stickiness of dough, fermentation rate, TPA, crumbScan image analysis, color, moisture contents and acceptance test. Mixograph peak time presented 4~5 minutes on every sample. However, CON, B10 and B20 sample presented more than 60%, and B30, B40 presented less than 60% at peak value (%). The result indicated that banana addition increased as the stickiness decreased. The fermentation rate generally increased, but the sample B40 decreased after 75 minutes. The result of crust and inside color, CON was the highest on lightness L value, B40 was the highest on both red a value and yellow b value. The result of pH showed that B40 was the lowest, and more banana addition made pH decreased. Thus, adding banana influences negatively on volume and cost of the product. The image analysis through crumbScan did not show any significant difference on crust thickness and distortion of crumb fineness. On the other hand, CON value was 774.33 that was the lowest, and B40 value was 927.66 which is the highest on the density of crumb fineness. Hardness showed a significant difference; B40 was the lowest, and Control was the highest. Moisture contents generally had a noticeable difference; CON value was the highest, and banana addition increased as the value decreased. At the result of acceptance test, one of the sensory tests, B20 showed the highest grade, and B40 showed the worst. Based on the above results of characteristic difference, banana addition could influence volume of the bread negatively.

• Korean Management Science Review
• /
• v.20 no.2
• /
• pp.135-149
• /
• 2003

Developing a proper program for customer evaluation is one of the most imminent tasks to implement CRM (Customer Relationship Management). Design of the Customer Value model is an important key to the customer evaluation progrgm. This paper proposes two models for estimating Customer Value. The first one is a Description Model for Customer Value based on customer CSI (Customer Satisfaction Index) data. This model represents as quantitative numbers what customers feel from the company or the service. The second one is a Prediction Model which employs factor analysis and regression to predict customer value. This paper exploits the two models to evaluate Customer Value as well as for customer behavior prediction.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.6
• /
• pp.159-172
• /
• 2023

This study aims to empirically investigate the relative effects of business-to-business (vs. business-to-consumer) business model innovation (BMI) on innovation performance. The research examines the impact of three key components of BMI: 1. value creation, 2. value proposition, and 3. value capture, on innovation performance. The 2022 Entrepreneurship Survey data by the Korean Entrepreneurship Foundation was used to analyze 2,879 companies. An exploratory data analysis (EDA) including various categories such as industry, firm, CEO, and technology chracteristics was conducted to show the latest startup status in Korea. The results show that value creation of B2B (vs. B2C) firms has a more positive and significant impact on innovation performance. Whereas, value proposition of B2C (vs. B2B) firms was found to have a more positive and significant effect on innovation performance. Interestingly, value capture did not show any effects for either type of firms. Additionally, the study employed seemingly unrelated regression (SUR) analysis for robustness checks. These findings provide important insights about the relative effects of B2B-BMI (vs. B2C-BMI).

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.2
• /
• pp.78-86
• /
• 2002

In general, X-ray diffraction method detects the changes of crystal lattice under material surface using the angle of diffraction 2$\theta$. This technique which deals with in the presented paper can be applied to a behavior on the slipped band or the micro crack cause to material degradation. The relation between half-value breadth and cycle numbers shows three stages, which consist of rapid decrease in the initial cycle, slight decrease in the middle cycle, and then rapid decrease in the final cycle. The ratio of half-value breadth has a constant value on B/B$\_$0/ - N diagram under the loading condition except early part of fatigue life. The ratio of half-value breadth B/B$\_$0/ - log N$\_$f/ with respect to number of cycle to failure N$\_$f/ has linear behavior on B/B$\_$0/ - log N$\_$f/ diagram. Therefore, the evaluation of fatigue life by the average gradient has much less mean error than the estimation of fatigue life by log B/B$\_$0/ - log N/N$\_$f/ relation.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.145-152
• /
• 2000

X-ray diffraction method detects change of crystal lattice distance under material surface using diffraction angle 2$\theta$. This technique can be applied to the behavior on slip band and micro crack due to material degradation. The relation between half-value breadth and number of cycle has three stages which constitute rapid decrease in initial number of cycles, slight decrease in middle number of cycles and rapid decrease in final number of cycles. The ratio of half-value breadth takes a constant value on B/B$_{0}$-N diagram with loading condition except early part of fatigue life. The ratio of half-value breadth B/B$_{0}$ with respect to number of cycle to failure N$_{f}$ has linear behavior on B/B$_{0}$-log N$_{f}$ diagram. Therefore, in this paper the estimation of fatigue life by average gradient method has much less estimated mean error than the estimation of fatigue life by log B/B$_{0}$-log N/N$_{f}$ relation.elation.ation.

• Knowledge Management Research
• /
• v.3 no.2
• /
• pp.17-30
• /
• 2002

The emergence of business-to-business e-marketplace spanning both vertical and horizontal markets has relandscaped the competitive playing field in nearly every industry over the past few years by aggregating scale and spends, increasing market and value chain transparency, automating transactions along the value chain. The traits uncovered in business-to-business e-marketplaces are the taking initiative of leading companies in e-marketplace, value chain composing of promoting commerces etc, wide alliance network, and B2B in relation to B2C etc.

• Korean Journal of Radiology
• /
• v.21 no.9
• /
• pp.1045-1054
• /
• 2020

Objective: This study aimed to evaluate the diagnostic value of combining the quantitative parameters of shear wave elastography (SWE) and superb microvascular imaging (SMI) to breast ultrasound (US) to differentiate between benign and malignant breast masses. Materials and Methods: A total of 200 pathologically confirmed breast lesions in 192 patients were retrospectively reviewed using breast US with B-mode imaging, SWE, and SMI. Breast masses were assessed based on the breast imaging reporting and data system (BI-RADS) and quantitative parameters using the maximum elasticity (Emax) and ratio (Eratio) in SWE and the vascular index in SMI (SMI_VI). The area under the receiver operating characteristic curve (AUC) value, sensitivity, specificity, accuracy, negative predictive value, and positive predictive value of B-mode alone versus the combination of B-mode US with SWE or SMI of both parameters in differentiating between benign and malignant breast masses was compared, respectively. Hypothetical performances of selective downgrading of BI-RADS category 4a (set 1) and both upgrading of category 3 and downgrading of category 4a (set 2) were calculated. Results: Emax with a cutoff value of 86.45 kPa had the highest AUC value compared to Eratio of 3.57 or SMI_VI of 3.35%. In set 1, the combination of B-mode with Emax or SMI_VI had a significantly higher AUC value (0.829 and 0.778, respectively) than B-mode alone (0.719) (p < 0.001 and p = 0.047, respectively). B-mode US with the addition of Emax, Eratio, and SMI_VI had the best diagnostic performance of AUC value (0.849). The accuracy and specificity increased significantly from 68.0% to 84.0% (p < 0.001) and from 46.1% to 79.1% (p < 0.001), respectively, and the sensitivity decreased from 97.6% to 90.6% without statistical loss (p = 0.199). Conclusion: Combining all quantitative values of SWE and SMI with B-mode US improved the diagnostic performance in differentiating between benign and malignant breast lesions.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.66-71
• /
• 2008

A total of 284 milled rice (MR) marketed in Korea were analyzed for grading characteristics (head rice, broken kernels, chalky kernels, and damaged kernels%), color characteristics (L-, a-, b-values, and whiteness), protein content (%), and the cooked rice (CR) sensory quality to investigate the key characteristics affecting the overall sensory quality of rice marketed in Korea. Relatively high correlation with the overall sensory quality of the CR was found in color characteristics such b-value of the CR (r=-0.779) and MR (r=-0.545), the a-value of the CR (r=0.513), and the whiteness (r=0.298) of the MR, compared to protein (r=-0.150), and the moisture (r=0.158) contents of the MR and the percentage of head rice (r=0.195). Partial least squares (PLS) regression of the CR b-value with various characteristics of the MR showed that CR b-value was increased with MR b-value effectively, followed by protein content, damaged kernels, chalky kernels, and colored kernels of MR while it was decreased with whiteness and moisture content for the MR.

• Journal of Chest Surgery
• /
• v.16 no.1
• /
• pp.83-90
• /
• 1983

During the period of March 1981 to September 1982 a series of survey has been done on the value of amylase in blood and urine of 24 patients who went through the operation of heart surgery, for congenital and acquired heart diseases, with extracorporeal circulation at the Department of Thoracic _ Cardiovascular Surgery, School of Medicine, Hanyang University. In order to analyze the iteration and inter-relation of the value of amylase in blood and urine and the extra corporeal circulation time. The duration of extra-corporeal circulation time up to 60 minutes was classified as Group A while above 60 minutes was classified as Group B. The results are as follow; 1. 3 patients [23.07%] among 13 patients of Group A and 3 patients [27.27%] among 11 patients, showed increased amylase value after the surgery. 2. The average value in blood after operation was 120.3190.71 unit in Group A and 130.90113.15 unit in Group B. It was 11.59 units [9.63%] higher in Group A than in Group B. 3. 1 patient [7.7%] among 13 patients of Group A and 2 patients[18.18%] among 11 patients of Group B, the frequency of Group B was 10.48% higher. 4. The average Value of amylase in urine after the surgery was 111.9254.87 unit in Group A and 151.54111.17 unit in Group B. It was 39.62 unit [32.72%] higher in Group A than in Group B. 5. The longer the duration of extra corporeal circulation time showed the higher the amylase value in blood and urine after the operation. 6. Although the value of amylase in blood and urine was increased after operation, no patients Were found to have developed clinical pancreatitis.