• Journal of Periodontal and Implant Science
• /
• v.38 no.sup2
• /
• pp.373-384
• /
• 2008

Purpose: The aim of this study is to compare the healing response of various Hydroxyapatite(HA) coated dental implants by Ion-Beam Assisted Deposition(IBAD) placed in the surgically created circumferential gap in dogs. Materials and methods: In four mongrel dogs, all mandibular premolars and the first molar were extracted. After an 8 weeks healing period, six submerged type implants were placed and the circumferential cylindrical 2mm coronal defects around the implants were made surgically with customized step drills. Groups were divided into six groups : anodized surface, anodized surface with 150nm HA and heat treatment, anodized surface with 300nm HA and heat treatment, anodized surface with 150nm HA and no heat treatment, and anodized surface with 150nm HA, heat treatment and bone graft, anodized surface with bone graft. The dogs were sacrificed following 12 weeks healing period. Specimens were analyzed histologically and histomorphometrically. Results: During the healing period, healing was uneventful and implants were well maintained. Anodized surface with HA coating and $430^{\circ}C$ heat treatment showed an improved regenerative characteristics. Most of the gaps were filled with newly regenerated bone. The implant surface was covered with bone layer as base for intensive bone formation and remodeling. In case that graft the alloplastic material to the gaps, most of the coronal gaps were filled with newly formed bone and remaining graft particles. The bone-implant contact and bone density parameters showed similar results with the histological findings. The bone graft group presented the best bone-implant contact value which had statistical significance. Conclusion: Within the scope of this study, nano-scale HA coated dental implants appeared to have significant effect on the development of new bone formation. And additional bone graft is an effective method in overcoming the gaps around the implants.

• Membrane Journal
• /
• v.22 no.3
• /
• pp.224-233
• /
• 2012

To improve permeation performance of gas separation membrane, polysulfone hollow fiber membrane was prepared by wet-dry phase inversion method using Triton X-100 as non-ionic additive. And variation of gas permeation behavior by additive was investigated. Various spinning conditions such as air gap, concentration of polymer, dope tank temperature were controlled and these effects were studied. The morphology and gas permeation property of hollow fiber membranes were investigated using scanning electron microscope (SEM) and bubble flow meter respectively. We confirmed that the membranes added with Triton X-100 had a smooth external skin at various air gap length conditions. The macrovoids of these hollow fiber membranes were more developed with increase of air-gap from 4 to 90 cm and that induced higher permeance. The permeance of polysulfone membranes has the higher value at comparatively lower concentration polymer (30 wt% polysulfone) and lower concentration of additive (15 wt% Triton X-100). When temperature in dope tank was controlled, the membranes prepared at $100^{\circ}C$ showed low permeance because of volatilization of additive and solvent.

• Journal of Korea Port Economic Association
• /
• v.29 no.3
• /
• pp.39-72
• /
• 2013

As a regional development gap between Southwest and Southeast of Jeonnam Province are becoming more serious, it is highly time to come up with measures for the balanced development of the two areas. This paper suggests construction of the Airport and Port Supporting Complex in apparent efforts to reduce the gap between the two areas and facilitate the Southwest economy. The Supporting Complex aims to constitute a triangle industrial cluster which is classified into the following three categories; 1. Traditional competitive industries 2. New growth engine industries 3. Attraction of companies u-turning from abroad such as China etc. To provide one-stop service through set-up of R&D Business Center is the heart of this triangle core. This paper had LQ and Shift&Share Analysis in an attempt to search for competitive industries among the traditional industries in Mokpo-si(city) and Muan-gun(county) of Jeonnam Province. As a result of the analysis, metal manufacturing industry and metal-working process products industry have been found competitive in the two areas. Among the new growth engine industries, this paper suggests precision instruments industry and advanced parts industry for utmost strengths of airport and port while u-turning industries from abroad include higher value-added textile industry and fashion industry. It is expected that all of above-mentioned industries for the triangle industrial cluster will contribute to laying the groundwork to develop regional economy further and create more jobs in the Southwest area of Jeonnam Province.

• Korean Journal of Social Welfare Studies
• /
• v.45 no.3
• /
• pp.5-34
• /
• 2014

This study investigates time allocation among paid work, child care and leisure of dual earner parents of pre-school child. The focuses of this study are time allocation of full-time dual earner parents which can be affected by traditional gender role ideology, and if the gender effects can be diminished or not. So the analysis were about gender effects in the time allocation and the moderating effects of education on gender effects. According to the analysis, the hypothesis are partly corroborated. Even though gender is not effective on paid working time(production time), it affects the time allocation for child care and leisure. There are significant gender gaps in time share for child care(family time) and time share for leisure(private time). The education has moderating effects on gender effects. When education years getting longer, gender gap in child care time becomes narrow, however gender gap in leisure time becomes wide. Because the education is expected to cultivate the sense of value of child care, it can bring decrease of gender gap in care time. According to the result on leisure time share, the education is not expected to make changes in patriarchical gender role in terms of leisure and it doesn't contribute work and life balance.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.17 no.2
• /
• pp.47-57
• /
• 2019

Purpose: Osmolar gap (OG) has been used for decades to screen for toxic alcohol levels. However, its reliability may vary due to several reasons. We validated the estimated ethanol concentration formula for patients with suspected poisoning and who visited the emergency department. We examined discrepancies in the ethanol level and patient characteristics by applying this formula when it was used to screen for intoxication due to toxic levels of alcohol. Methods: We retrospectively reviewed 153 emergency department cases to determine the measured levels of toxic ethanol ingestion and we calculated alcohol ingestion using a formula based on serum osmolality. Those patients who were subjected to simultaneous measurements of osmolality, sodium, urea, glucose, and ethanol were included in this study. Patients with exposure to other toxic alcohols (methanol, ethylene glycol, or isopropanol) or poisons that affect osmolality were excluded. OG (the measured-calculated serum osmolality) was used to determine the calculated ethanol concentration. Results: Among the 153 included cases, 114 had normal OGs (OG≤14 mOsm/kg), and 39 cases had elevated OGs (OG>14). The mean difference between the measured and estimated (calculated ethanol using OG) ethanol concentration was -9.8 mg/dL. The 95% limits of agreement were -121.1 and 101.5 mg/dL, and the correlation coefficient R was 0.7037. For the four subgroups stratified by comorbidities and poisoning, the correlation coefficients R were 0.692, 0.588, 0.835, and 0.412, respectively, and the mean differences in measurement between the measured and calculated ethanol levels were -2.4 mg/dL, -48.8 mg/dL, 9.4 mg/dL, and -4.7 mg/dL, respectively. The equation plots had wide limits of agreement. Conclusion: We found that there were some discrepancies between OGs and the calculated ethanol concentrations. Addition of a correction factor for unmeasured osmoles to the equation of the calculated serum osmolality would help mitigate these discrepancies.

• Journal of the Korean Institute of Gas
• /
• v.23 no.3
• /
• pp.1-6
• /
• 2019

The purpose of the present study is to elucidate flue gas recirculation device for reduction of nitrogen oxides using coanda nozzle without adopting additional power driving fan in a waste incinerator. The characteristics of the exhaust gas recirculation flow rate and the average temperature change at the outlet of the mixed gas were investigated according to the change of air supply nozzle gap and the position of air supply nozzle. When the gap of the air supply nozzle was changed to 3.22, 4.03, and 4.84 mm, the largest recirculation flow ratio, which is the ratio of exhaust gas recirculation flow rate and air supply flow rate, was 2.227 for the case with 3.22 mm and its mean temperature at outlet was $594.8^{\circ}C$. When the position of the air supply nozzle changes to the front position, neck position, and expansion position of the coanda nozzle neck, the recirculation flow ratios at the forward position and the neck position were nearly almost the same value, 1.843, and 1.696 at the expansion position, their mean temperatures were $559.8^{\circ}C$ and $544.3^{\circ}C$, respectively.

• International Journal of Computer Science & Network Security
• /
• v.21 no.3
• /
• pp.245-256
• /
• 2021

Poor logistical infrastructure and agri-food supply chain management leads to significant food waste in logistic system. The concept of the sustainable value added agri-food chains requires defined approach to the analysis of the existing situation, possible improving strategies and also assessment of these changes impact on further development. The purpose of research is to provide scientific substantiation of theoretical and methodological principles and develop practical recommendations for the improvement of the agri-food logistics distribution system. A case study methodology is used in this article. The research framework is based on 4 steps: Value Stream Mapping (VSM), Gap and Process Analysis, Validation and Improvement Areas Definition and Imitation Modelling. This paper presents the appropriateness of LEAN logistics tools using, in particular, Value Stream Mapping (VSM) for minimizing logistic losses and Simulation Modeling of possible logistics distribution system improvement results. The algorithm of VSM analysis of the agri-food supply chain, which involves its optimization by implementing the principles of sustainable development at each stage, is proposed. The methodical approach to the analysis of possible ways for optimizing the operation of the logistics system of the agri-food distribution is developed. It involves the application of Value Stream Mapping, i.e. designing of stream maps of the creation of the added value in the agri-food supply chain for the current and future state based on the minimization of logistic losses. Simulation modeling of the investment project on time optimization in the agri-food supply chain and economic effect of proposed improvements in logistics product distribution system functioning at the level of the investigated agricultural enterprise has been determined. Improvement of logistics planning and coordination of operations in the supply chain and the innovative pre-cooling system proposed to be introduced have a 3-year payback period and almost 75-80% probability. Based on the conducted VSM analysis of losses in the agri-food supply chain, there have been determined the main points, where it is advisable to conduct optimization changes for the achievement of positive results and the significant economic effect from the proposed measures has been confirmed. In further studies, it is recommended to focus on identifying the synergistic effect of the agri-food supply chain optimization on the basis of sustainable development.

• Information Systems Review
• /
• v.10 no.3
• /
• pp.111-132
• /
• 2008

Although there are many processes in which factors interact with each other during enterprise resource planning(ERP) implementation, factors affecting ERP implementation have been investigated in an isolated way. In order to bridge the gap, this study attempts to provide a research model to explain how these factors affect ERP implementation success from a holistic perspective. In particular, this research focuses on how bundling and leveraging processes affect ERP implementation success using resource based theory, a strategy formulation framework, and a dynamic resource management model of value creation. The model amalgamates organizational resources and capabilities via the bundling and leveraging processes to identify the effect on ERP implementation success. This paper validates the proposed model by presenting Australian aviation industry case study. Case findings will be in help to reveal the effect of resource bundling in establishing capabilities and effect of capabilities leveraging in deriving the ERP implementation success.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.3
• /
• pp.151-161
• /
• 2013

This paper proposes a strategic model of linkage between productivity metrics and financial accounting metrics to properly evaluate the financial effect of TPM activities and the business performance. This linkage strategy provides a connection tool for clear communication between factory-level and headquarters that the metrics proposed by this paper ultimately improves a quality of support from the management by receiving the factors required for productivity activities in the practical field. This factor includes such as equipment, raw materials and labors. Here, we propose that chain reaction models using break down structure of productivity metrics and financial metrics enhance the knowledge sharing of KPI (Key Performance Indicator) which generally tend to create oversimplified communication between management in headquarters and employees in the practical fields. The productivity metrics include OEE(Overall Equipment Effectiveness) of TPM (Total Productive Maintenance), OLE (Overall Labor Effectiveness) of PAC(Performance and Analysis and Control) activities, and OYE (Overall Yield Effectiveness) of TMM(Total Material Management) activities. The financial accounting metrics include ROE(Return on Equity), ROA(Return on Asset), and AVR(Added-Value Rate). The suggested chain reaction model selects the financial metrics as initial stage and branch down until final stage of productivity metrics. When demand exceeds supply, an ideal speed rate, the lean OEE strategy can be initially applied to reduce the gap between the demand and supply, then apply variable costing to estimate correct amount of operating profit. In addition, the paper presents a new type of model for linkage between financial accounting metrics including CAPEX(Capital Expenditure), OPEX(Operating Expenditure), EVA(Economic Added Value), DCL(Degree of Combined Leverage), and TPM productivity activities including AM(Autonomous Maintenance), PM(Preventive Maintenance), MP(Maintenance Prevention) and QM(Quality Maintenance). In order to support the evidence of proposed linkage strategy, a case analysis on 52 projects from national TPM contest from 2011 to 2012 is analyzed. The case presents the classification of CAPEX and OPEX activities from TPM, and proposes the correct implementation of financial effect for TPM projects.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.4
• /
• pp.561-570
• /
• 2018

This study defined the changes of mechanical properties of silk fabric according to bias angles and investigated the influence of bias angles and fabric characteristics on hand value. For the experiments, 4 types of commercial silk plain weave fabrics were chosen. All fabrics had the same density, but different yarn characteristics. Fabric samples were cut into 12 different bias angles between $0^{\circ}$ and $165^{\circ}$ with $15^{\circ}$ gap and measured for tensile, shear, bending, surface properties by the KES-FB system. As a result, most mechanical parameters showed an asymmetry shape with $90^{\circ}$. The most flexible and easiest angles are $45^{\circ}$, $135^{\circ}$. Furthermore, the bias angles of silk fabrics were classified into three clusters with mechanical properties such as WT, 2HG, 2HG5, B, and SMD. The parameters according to fabric samples showed significant differences at WT, RT, B, 2HB, and MIU. It showed bigger effects as yarn fineness; in addition, twists were higher except RT. The results of hand value indicated that Koshi and Hari were highest with a bias angle of $75^{\circ}$; however, Shinayakasa was highest at bias angle of $45^{\circ}$. Finally, Shari was lowest at $45^{\circ}$.