• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.67-72
• /
• 2005

This study proposes a design methodology to determine the optimum configurations of the optical flying head (OFH) for near-field recording systems. Since the OFH requires stricter static and dynamic characteristics of slider air-bearings within an optical tilt tolerance over the entire recording band, an optimum design to keep the focusing and tracking ability stable is essential. The desired flying characteristics considered in this study are to minimize the variation in flying height between the SIL and the disk from a target value, satisfying the restriction of the minimum flying height, to keep the pitch and roll angles within an optical tilt tolerance, and to ensure a higher air-bearing stiffness. Simulation results demonstrate the effectiveness of the proposed design methodology by showing that the static and dynamic flying characteristics of the optimally designed OFH are enhanced in comparison with those of the initial. The gap between the SIL and the disk can be kept at less than 100 nm even if the optical tilt tolerance of the SIL is considered.

• Journal of Biomedical Engineering Research
• /
• v.8 no.1
• /
• pp.69-74
• /
• 1987

The power spectrum of background EEG is estimated by the Plsarenko Harmonic Decomposition with the stochastic process whlch consists of the nonhamonic sinus Bid and the white nosie. The estimation results are examined and compared with the results from the maximum entropy spectral extimation, and the optimal order of this from the maximum entropy spectral extimation, and the optimal order of this model can be determined from the eigen value's fluctuation of autocorrelation of background EEG. From the comparing results, this method is possible to estimate the power spectrum of background EEG.

• Journal of the Korea Furniture Society
• /
• v.17 no.3
• /
• pp.1-16
• /
• 2006

Based on data collected by the State Forestry Administration (SFA) and other databases, this paper describes the current status, future trend and general policies in China's forestry. Forestry sector plays an important role in GDP growth of China. As a result forestry industry value output is increasing day by day. There is huge gap between demand and supply of timber projected in 2010. As a result it is necessary to develop fast growing, high yield forest following some specific policies. The ultimate goals of forestry are to construct or improve industry infrastructure, overall upgrade of forest industry structure, income improvement of forest employees and peasants, polices renewal and technology improvement, acceleration of forest processing with high-tech.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.527-532
• /
• 2011

Whirling vibration in severe cases may result in shaft cracking and typically gap sensors are utilized to confirm its values under the outside underwater of ship. The bending stress value causing whirling vibration on the propulsion shafting system of a 40-ton small vessel was verified by theoretical analysis and its vibration measurement. However, because of underwater condition, the accuracy for this measurement method is presumed low. In this study, the strain gauge basic principle and the bending stress calculation method are considered. The relationships are then applied for obtaining the whirling vibration of the 40-ton small vessel. As a result, a new method in estimation of whirling vibration is reached and suggested.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.5
• /
• pp.13-20
• /
• 2005

Micro EDM process is generally used for machining microholes, cavities, and three dimensional shapes. For machining micro structures, first of all, micro tool electrode is indispensable and WEDG system is proposed for tool fabrication method. When using WEDG, its machining characteristics are highly affected by many EDM parameters such as applied voltage, current, rotation speed, capacitance, and pulse duration. Therefore, the design of experiment is introduced to fully understand the effect of the EDM parameters on machining tool electrode. And an attempt has been made to develop the mathematical model for predicting the size of the tool electrode by calculating spark distance. The suggested model was verified with experiment and predicted working gap distance is in good accord with the measured value.

• Tunnel and Underground Space
• /
• v.4 no.1
• /
• pp.63-76
• /
• 1994

This paper discusses contents of the existing design, the behaviours prediction on the strut and retaining wall around subsurfaces, and also evaluates the measured results in comparison with the management criterion during excavation period of ventilation shaft at Pusan-Subway 220. Field measurements showed that maximum displacement 23.74 mm at boundary site of multistratification and the weathered rock to be formed at 0.2~0.6 H of total excavating depth(H), 68 ton of maximum axial force and 4.4X102 kg/cm2 of stress on strut. The measured axial force exceeds prediction levels by up to 50 percent at the weathered soil & rock, and the others come under the category of their levels. The great gap of both field measurements and prediction on behaviour makes a difference of the site situation at the design stage and the practical working. This measured value is greatly safety in comparison with that of the safety criterion, but axial force at 4~5 strut of ventilation shaft l is higher than the prediction.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.232-236
• /
• 2005

In-situ Air Sparging (IAS, AS) is a groundwater remediation technique, in which organic contaminants are volatilized into air as it rises from saturated to vadose soil zone. The purpose of this study was to investigate the effect of environmental conditions on the degradation of VOCs (Volatile Organic Compounds) and $CO_2$ in the unsaturated zone and TPH (Total Petroleum Hydrocarbons) in saturated zone of sandy loam. In the laboratory, diesel (10,000 mg TPH/kg)-contaminated saturated soil. After heating the soil for 36 days, the equilibrium temperature of soil reached to $34.9{\pm}2.7^{\circ}C$ and TPH concentration was reduced to 78.9% of the initial value, Volatilization loss of VOCs in TPH was about 2%, The reduction gradient of $CO_2$ concentration was 0.018/day in air space and 0.0007/day in unsaturated zone.

• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.2
• /
• pp.52-55
• /
• 2001

We report best dielectric function of ZnS by spectroscopic ellipsometry in the 3.7 - 6.0 eV photon energy range at room temperature. Using proper wet chemical etching procedure, natural overlayer was removed to obtain the pure dielectric function of ZnS, which had a higher <$\xi$$_2$> value at the El band gap peak than that previously reported. We also determined the dielectric property of the natural overlayer on ZnS by following the evolution of <$\xi$$_2$> with chemical etching. We found that the optical property of the overlayer was well described by amorphous semiconductor model.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.2
• /
• pp.94-106
• /
• 2004

Determining those gaps in agricultural and other information to improve agrometeorological analyses for agriculture is a large task. The effective integration of appropriate data systems, including remote sensing systems, with agricultural systems modelling capability is described as a worthy outcome in this endeavour. Data issues, including those associated with data length, quality, maintenance, and archiving remain serious issues to be addressed. The role of remote sensing and geographic information systems in agrometeorology is important and is explored here. The value of simulation models to provide the synthesis for future agrometeorological requirements is further elucidated.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.254-256
• /
• 2003

AC loss is one of the important superconducting power machine that we have to consider deeply using the stack wires with the HTS. AC magnetic field is occurred around the wires when the electric current is conducted to the stack wires. It also brings electric field to the wires and occurs self field loss, whose quantity is appeared differently by distance of the stack wires. In this paper, transport current losses of a stack short sample of HTS were compared with Norris equation and measured value.