• 자원리싸이클링
• /
• 제21권2호
• /
• pp.53-58
• /
• 2012

LCD용 편광필름에 핵심적으로 사용되어진 KI (Potassium Iodide) 폐용액으로부터 정제과정을 통해 KI 고농축액 및 고순도 결정을 회수하는 실험을 행하였다. 본 연구에서는 B 및 PVA 등의 불순물을 포함한 1~4% KI 폐액에서 농축 분별결정을 통해 최대 불순물인 붕소화합물을 제거하여 약 50%의 KI 농축액 및 순도 약 95% 이상의 KI 결정을 얻을 수 있었다. 이 결정물을 용매로 세정함으로서 잔량의 불순물을 제거함으로서 약 99.5% 이상의 고순도 KI결정을 얻을 수 있었다. 그리고 전 과정의 농축과정에서의 KI 회수율은 약 90% 이상의 결과를 얻었다.

• Membrane and Water Treatment
• /
• 제10권4호
• /
• pp.287-298
• /
• 2019

Lotus leaf has a special dual micro and nano surface structure which gives its highly hydrophobic surface characteristics and so-called self cleaning effect. In order to endow PVDF hollow fiber membrane with this special structure and improve the hydrophobicity of membrane surface, PVDF hollow fiber composite membranes was obtained through the immersion coating of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) dilute solution on the outside surface of PVDF support membrane. The prepared PVDF composite membranes were used in the vacuum membrane distillation (VMD) for the desalination. The effects of PVDF-HFP dilute solution concentration in the dope solution and coating time on VMD separation performance was studied. Membranes were characterized by SEM, WCA measurement, porosity, and liquid entry pressure of water. VMD test was carried out using $35g{\cdot}L^{-1}$ NaCl aqueous solution as the feed solution at feed temperature of $30^{\circ}C$ and the permeate pressure of 31.3 kPa. The vapour flux reached a maximum when PVDF-HFP concentration in the dilute solution was 5 wt% and the coating time was kept in the range of 10-60 s. This was attributed to the well configuration of micro-nano rods which was similar with the dual micro-nano structure on the lotus leaf. Compared with the original PVDF membrane, the salt rejection can be well maintained which was greater than 99.99 % meanwhile permeation water conductivity was kept at a low value of $7-9{\mu}S{\cdot}cm^{-1}$ during the continuous testing for 360 h.

• 한국진공학회지
• /
• 제8권4A호
• /
• pp.445-449
• /
• 1999

We studied the properties of the InAs epitaxial layers grown of (100)-oriented GaAs ($2^{\circ}$tilted toward[011]) by molecular beam epitaxy. From DCX (double-crystal x0ray), the better crystal quality was shown in InAs epitaxial layers on about 2500$\AA$ GaAs epitaxial layers on GaAs, we obtained the high mobility of InAs epitaxy in As/In BEP ratio (1.2~2.0) from Hall effect measurement. The electron mobility increased as electron concentration increases, until Si cell temperature $960^{\circ}C$$(N_D=2.21\times10^{-17}\textrm{cm}^{-3})$. The mobility decreases as the Si cell temperature increases, at the temperature over $960^{\circ}C$. We obtained the high mobility (1.10$\times$104cm2/V.s) at Si electron concentration of $N_D=2.21\times10^{-17}\textrm{cm}^{-3}$.

• 한국입자에어로졸학회지
• /
• 제14권2호
• /
• pp.25-33
• /
• 2018

본 연구에서는 청소 과정에서 바닥에 먼지가 실내 공기 중으로 비산되는 특성을 공기 중 미세먼지를 측정하여 분석하였다. 신발을 벗지 않고 생활하는 국내 사무실을 대상으로 하였고, 실내 청소 과정에서 발생하는 미세먼지를 측정하였다. 미세먼지($PM_{10}$)와 초미세먼지($PM_{2.5}$)와 $1{\mu}m$ 보다 작은 먼지의 무게농도($PM_{1.0}$)을 분석하였고, 청소 과정에서 발생하는 $0.3{\mu}m$ 이상의 먼지의 크기를 측정하여 분석하였다. 특히, 빗자루질과 진공청소기를 사용하는 과정에서 재비산 되는 미세먼지의 특성을 분석하였고, 입자의 크기에 따른 재비산 특성과 실내 농도 변화 특성을 확인하였다. $PM_{2.5}$와 $PM_{10}$은 청소 시작과 함께 농도가 증가하였고, 청소 이후에도 실내에 부유하여 장시간 인체에 노출될 수 있을 것으로 보인다. 반면에 $PM_{1.0}$은 상대적으로 청소과정에서 농도가 증가하는 경향을 확인할 수 없었다. 특히, $2.5{\sim}10{\mu}m$ 크기의 먼지는 바닥에 먼지가 많은 조건에서 빗자루질로 청소하는 경우, 초기 농도의 약 60배까지 높아질 수 있음을 확인하였다. 바닥에 먼지가 적은 조건에서 진공청소기를 사용하는 경우도 $2.5{\sim}10{\mu}m$ 크기의 먼지가 증가하였지만 초기 농도의 5배 이하였다. 중성능급 배기필터가 장착된 진공청소기가 가동하는 동안 CPC로 측정된 총 개수농도가 급격히 증가한 후 감소하는 특성이 나타났다. 개수로 대부분을 차지하는 먼지는 250 nm 보다 작은 크기였다. 실내 거주자의 미세먼지 노출은 외부에서 유입된 대기 미세먼지와 실내에서 발생된 실내 생성 미세먼지가 함께 영향을 준다고 알려져 있다. 그렇지만, 국내 실내 활동 중 발생되는 미세먼지에 대한 체계적인 측정과 분석 연구가 많지 않았다. 이미 진행되고 있는 다양한 대기 미세먼지 연구 뿐 아니라 앞으로는 실내의 다양한 활동에 기인한 미세먼지 생성 특성에 대한 심도 깊은 연구가 필요할 것으로 생각된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권9호
• /
• pp.1269-1275
• /
• 2012

An experiment was conducted to study the effect of soluble protein supplements on concentration of soluble non-ammonia nitrogen (SNAN) in the liquid phase of ruminal (RD) and omasal digesta (OD) of Korean native steers, and to investigate diurnal pattern in SNAN concentration in RD and OD. Three ruminally cannulated Korean native steers in a $3{\times}3$ Latin square design consumed a basal diet of rice straw and corn-based concentrate (control), and that supplemented (kg/d DM basis) with intact casein (0.24; IC) or acid hydrolyzed casein (0.46; AHC). Ruminal digesta was sampled using a vacuum pump, whereas OD was collected using an omasal sampling system at 2.0 h intervals after a morning feeding. The SNAN fractions (free amino acid (AA), peptide and soluble protein) in RD and OD were assessed using the ninhydrin assay. Concentrations of free AA and total SNAN in RD were significantly (p<0.05) lower than those in OD. Although free AA concentration was relatively high, mean peptide was quantitatively the most important fraction of total SNAN in both RD and OD, indicating that degradation of peptide to AA rather than hydrolysis of soluble protein to peptide or deamination may be the most limiting step in rumen proteolysis of Korean native steers. Diurnal variation in peptide concentration in OD for the soluble protein supplemented diets during the feeding cycle peaked 2 h post-feeding and decreased thereafter whereas that for the control was relatively constant during the entire feeding cycle. Diurnal variation in peptide concentration was rather similar between RD and OD.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.1939-1944
• /
• 2020

Pool boiling heat transfer of a copper microporous coating was experimentally studied in borated water with a concentration of boric acid from 0.0 to 5.0 vol percent (vol%) to determine the effect of boric acid on boiling heat transfer in water. A high-temperature, thermally conductive microporous coating (HTCMC) was created by sintering copper powder with an average particle size of 67 ㎛ onto a 1 cm × 1 cm plain copper surface with a coating thickness of ~300 ㎛ within a furnace in a vacuum environment. The tests showed that the nucleate boiling heat transfer coefficient (NBHT) of HTCMC became slightly less enhanced as the concentration of boric acid increased but the NBHT coefficient values were still significantly higher than those of the plain surface. The critical heat flux (CHF) values from 0 to 1.0 vol% were maintained at ~2,000 kW/㎡, and then, they gradually decreased down to ~1,700 kW/㎡ as the concentration increased further to 5.0 vol%. It is believed that the micro-scale pores of the HTCMC were partially blocked by the high boric acid concentration during the nucleate boiling such that the small bubbles were not effectively created using the HTCMC reentrant cavities as the boric acid concentration increased.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.403-403
• /
• 2012

그래핀(graphene)은 우수한 전기적, 물리적인 특성을 지닌 물질로써 다양한 분야에서 이를 활용하려는 노력들이 활발히 진행되고 있다. 그중 그래핀을 채널로 이용하는 전계효과 트랜지스터(field effect transistor)로의 응용에 있어, 가장 핵심적인 도전과제는 전하농도(carrier concentration)의 제어 및 에너지 밴드갭(energy bandgap) 형성이라 할수 있다. 최근 다양한 물질을 이용한 도핑을 통해 이를 해결하기 위한 노력들이 진행되고 있는 추세이다. 본 연구에서는 열화학 기상 증착법(Thermal chemical vapor deposition)을 통해 합성된 단일층의 그래핀에 염화니켈 나노입자의 분산액을 스핀코팅 한후 열처리를 통해 그래핀-니켈 나노입자의 하이브리드 구조를 제작하였다. 제작된 그래핀-니켈 나노입자 하이브리드 물질의 구조적 특징을 주사 전자 현미경(Scanning electron microscope)과 원자힘 현미경(Atomic force microscopy)을 통하여 확인하였다. 또한 니켈 분산액의 농도와 도핑효과 와의 상관관계를 라만분광법(Raman spectroscopy)과 이온성 용액법(Ionic liquid)을 이용한 전계효과 특성분석을 통해 조사하였다. 나노입자의 형성 메커니즘은 X-선 광전자 분광법(X-ray photoelectron spectroscopy)을 통하여 규명하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.226-226
• /
• 2012

The electronic and electrical properties of nickel oxide (NiO) thin films were investigated by reflection electron energy loss spectroscopy (REELS), x-ray photoelectron spectroscopy (XPS), and Hall Effect measurements. REELS spectra revealed that the band gap of the NiO thin film was increased from 3.50 eV to 4.02 eV after annealing the sample at $800^{\circ}C$. Our XPS spectra showed that the amount of Ni2O3 decreased after annealing. The Hall Effect results showed that the doping type of the sample changed from n type to p type after annealing. The resistivity decreased drastically from $4.6{\times}10^3$ to $3.5{\times}10^{-2}$ ${\Omega}{\cdot}cm$. The mobility of NiO thin films was changed form $3.29{\times}10^3$ to $3.09{\times}10^5cm^2/V{\cdot}s$. Our results showed that the annealing temperature plays a crucial role in increasing the carrier concentration and the mobility which leads to lowering resistivity of NiO thin films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.295-295
• /
• 2016

Recently, TCO films with low carrier concentration, high mobility and high work function are proposed beneficial as front electrode in HIT solar cell due to free-carrier absorption in NIR wavelength region and low Schottky barrier height in the front TCO/a-Si:H(p) interface. We report high transmittance and work function zirconium-doped indium tin oxide (ITO:Zr) films with various plasma (Ar/O2 and Ar) conditions. The role of (Ar/O2) plasma was to enhance the work function of the ITO:Zr films whereas the pure Ar plasma based ITO:Zr showed good electrical properties. The RF magnetron sputtered ITO:Zr films with low resistivity and high transmittance were employed as front electrode in HIT solar cells, yield the best performance of 18.15% with an open-circuit voltage of 710 eV and current density of 34.63 mA/cm2. The high work function ITO:Zr films can be used to modify the front barrier height of HIT solar cell.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.105.1-105.1
• /
• 2016

Many of the complex materials developed today derive their unique properties from the presence of multiple phases or from local variations in elemental concentration. Simply performing analysis of the bulk materials is not sufficient to achieve a true understanding of their physical and chemical natures. Secondary ion mass spectrometer (SIMS) has met with a great deal of success in material characterization. The basis of SIMS is the use of a focused ion beam to erode sample atoms from the selected region. The atoms undergo a charge exchange with their local environment, resulting in their conversion to positive and negative secondary ions. The mass spectrometric analysis of these secondary ions is a robust method capable of identifying elemental distribution from hydrogen to uranium with detectability of the parts per million (ppm) or parts per billion (ppb) in atomic range. Nano secondary ion mass spectrometer (Nano SIMS, Cameca Nano-SIMS 50) equipped with the reactive ion such as a cesium gun and duoplasmatron gun has a spatial resolution of 50 nm which is much smaller than other SIMS. Therefore, Nano SIMS is a very valuable tool to map the spatial distribution of elements on the surface of various materials In this talk, the surface imaging applications of Nano SIMS in KBSI will be presented.