• 여성건강간호학회지
• /
• 제7권2호
• /
• pp.203-211
• /
• 2001

A women's meaning about labor and delivery may influence the process of childbirth and performance of the maternal role. Therefore, negative meaning about the birth experience may have a negative impact on the childrearing. The purpose of this study is to explore the meaning of labor and delivery for the strategies of nursing intervention in positive childbirth experience. The data were collected through the in-depth interviews of 10 nursing college women on Jeju Island from October 2000 to January 2001. The interviews were conducted by investigator in the class room after school hours. Each interview lasted for about 30 minutes on average. Subjects were interviewed one at a time. The interviews were recorded with the consent of the subject. The data were analyzed by means of Giorgi's phenomenological analysis methods and catagorized according to the similarities of its contents. The investigator read the data repeatedly to identify the themes and the main meanings. Eight main meanings were identified as follows : 1)pain 2) shame and disgust 3)load 4)naturality 5)unreality 6)happiness 7)anxiety 8)maturity. Under these main meanings there were seventeen themes. I. Pain : (a) It's too painful (b) I don't want to deliver II. Shame and Disgust : (a) I am shameful (b) I am hateful III. Load : (a) I don't feel free (b) I have responsibility IV. Naturality : (a) It's in order to obtain a child (b) It's natural for women (c) It's a destiny of women V. Unreality : I don't feel real VI. Happiness : (a) I am glad (b) I am happy (c) It's miraculous VII. Anxiety : (a) I am anxious (b) I am worried VIII. Maturity : (a) I understand parents (b) I feel great. The results of the study will provide basic data for positive childbirth experience.

• 대한본초학회지
• /
• 제38권5호
• /
• pp.9-19
• /
• 2023

Objectives : Osteoporosis is a systemic skeletal disorder characterized by reduced bone mineral density and increased risk of fractures. Bisphosphonates and selective estrogen receptors, which are bone resorption inhibitors that are currently widely used as osteoporosis treatments, show serious side effects when administered for a long time. Research on bone resorption inhibitors that complement the problems of existing treatments is needed. The purpose of this study was to investigate the effect of inhibiting osteoclast differentiation and activity on the tuberous root of Ampelopsis japonica (Thunb.) Makino (AM). Methods : After extracting AM using distilled water and ethanol, the inhibitory effects of the two solvents on osteoclast differentiation were compared using the RANKL-induced in vitro experimental model and the TRAP assay kit. The impact of AM on bone resorption was investigated through the pit formation assay, and its effect on F-actin formation was assessed through fluorescent staining. Additionally, protein and mRNA expression levels of osteoclast differentiation markers (NFATc1, c-Fos, TRAP and ATP6v0d2) and resorption markers (MMP-9, CTK, and CA2) were analyzed via western blot and RT-PCR. Results : AM treatment significantly decreased the number of TRAP-positive cells and pit formation area. Furthermore, AM suppressed both the protein and mRNA expression of NFATc1 and c-Fos, key transcription factors involved in osteoclast differentiation and it downregulated the expression of osteoclast-associated genes such as TRAP, CTK, MMP-9, CA2, and ATP6v0d2. Conclusions : These results suggest that AM can inhibit bone resorption and osteoclast differentiation, indicating its potential for use in the treatment and prevention of osteoporosis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.330-332
• /
• 2009

Highly stable bottom gate thin film transistors(TFTs) with a zinc indium tin oxide(Zn-In-Sn-O:ZITO) channel layer have been fabricated by rf-magnetron co-sputtering using a indium tin oxide(ITO:90/10), a tin oxide and a zinc oxide targets. The ZITO TFT (W/L=$40{\mu}m/20{\mu}m$) has a mobility of 24.6 $cm^2$/V.s, a subthreshold swing of 0.12V/dec., a turn-on voltage of -0.4V and an on/off ratio of >$10^9$. When gate field of $1.8{\times}10^5$ V/cm was applied with source-drain current of $3{\mu}A$ at $60^{\circ}C$, the threshold voltage shift was ~0.18 V after 135 hours. We fabricated AM-OLED driven by highly stable bottom gate Zn-In-Sn-O TFT array.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.571-574
• /
• 2002

We propose modified concept that enables LCDs quasi-impulsive operations, and demonstrated a prototype AM-LCD that is suitable for displaying moving pictures combined with '2-Domain Half-V shaped switching mode' FLCD.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.170-170
• /
• 2012

최근 주목받고 있는 amorphous InGaZnO (a-IGZO) thin film transistors (TFTs)는 수소가 첨가된 비정질 실리콘 TFT (a-Si;H)에 비해 비정질 상태에서도 높은 이동도와 뛰어난 전기적, 광학적 특성에 의해 큰 주목을 받고 있다. 또한 넓은 밴드갭에 의해 가시광 영역에서 투명한 특성을 보이고, 플라스틱 기판 위에서 구부러지는 성질에 의해 플랫 패널 디스플레이나 능동 유기 발광 소자 (AM-OLED), 투명 디스플레이에 응용되고 있다. 하지만, 실제 디스플레이가 동작하는 동안 스위칭 TFT는 백라이트 또는 외부에서 들어오는 빛에 지속적으로 노출되게 되고, 이 빛에 의해서 TFT 소자의 신뢰성에 악영향을 끼친다. 또한, 디스플레이가 장시간 동안 동작 하면 내부 온도가 상승하게 되고 이에 따른 온도에 의한 신뢰성 문제도 동시에 고려되어야 한다. 특히, 실제 AM-LCD에서 스위칭 TFT는 양의 게이트 전압보다 음의 게이트 전압에 의해서 약 500 배 가량 더 긴 시간의 스트레스를 받기 때문에 음의 게이트 전압에 대한 신뢰성 평가는 대단히 중요한 이슈이다. 스트레스에 의한 문턱 전압의 변화는 게이트 절연막과 반도체 채널 사이의 계면 또는 게이트 절연막의 벌크 트랩에 의한 것으로 게이트 절연막의 선택에 따라서 신뢰성을 효과적으로 개선시킬 수 있다. 본 연구에서는 적층된 $Si_3N_4/SiO_2$ (NO 구조) 이중층 구조를 게이트 절연막으로 사용하고, 완충층의 역할을 하는 $SiO_2$막의 두께에 따른 소자의 전기적 특성 및 신뢰성을 평가하였다. a-IGZO TFT 소자의 전기적 특성과 신뢰성 평가를 위하여 간단한 구조의 pseudo-MOS field effect transistor (${\Psi}$-MOSFET) 방법을 이용하였다. 제작된 소자의 최적화된 $SiO_2$ 완충층의 두께는 20 nm이고 $12.3cm^2/V{\cdot}s$의 유효 전계 이동도, 148 mV/dec의 subthreshold swing, $4.52{\times}10^{11}cm^{-2}$의 계면 트랩, negative bias illumination stress에서 1.23 V의 문턱 전압 변화율, negative bias temperature illumination stress에서 2.06 V의 문턱 전압 변화율을 보여 뛰어난 전기적, 신뢰성 특성을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제10권2호
• /
• pp.33-37
• /
• 2003

Si 태양전지의 효율 개선을 위해 textured 표면을 갖는 에피텍셜 베이스 전지(TSEB)를 제작하고 이의 전기광학적 특성을 조사하였다. 제작된 전지는 AM-1 100 mW/$cm^2$ 입사광 아래에서 개방전압이 0.62 V로, 단락전류가 40 mA로, 충실도가 0.7, 전력변환 효율이 16%로 나타났다. 본 연구에서 제안된 전지는 $P^-/P^+$ 에피구조에 의한 광흡수 영역에서 캐리어의 드리프트 이동과 효과적 배면전계의 형성, 그리고 buried contact을 통한 낮은 직렬저항 등으로 인해 고효율 Si 태양전지의 제작에 적합한 구조로 판단된다.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.273-280
• /
• 2014

The spectrum weighted responses of various detectors were calculated to provide guidance on the proper selection and use of survey instruments on the basis of their energy response characteristics on the neutron fields. To yield the spectrum weighted response, the detector response functions of 17 neutron-measuring devices were numerically folded with each of the produced calibration neutron spectra through the in-house developed software 'K-SWR'. The detectors' response functions were taken from the IAEA Technical Reports Series No. 403 (TRS-403). The reference neutron fields of 21 kinds with 2 spectra groups with different proportions of thermal and fast neutrons have been produced using neutrons from the $^{241}Am$-Be sources held in a graphite pile, a bare $^{241}Am$-Be source, and a DT neutron generator. Fluence-average energy ($E_{ave}$) varied from 3.8 MeV to 16.9 MeV, and the ambient-dose-equivalent rate [$H^*(10)/h$] varied from 0.99 to 16.5 mSv/h.

• 한국분말재료학회지
• /
• 제26권4호
• /
• pp.319-326
• /
• 2019

Additive manufacturing (AM) is a highly innovative method for joining dissimilar materials for industrial applications. In the present work, AM of STS630 and Ti-6Al-4V powder alloys on medium entropy alloys (MEAs) NiCrCo and NiCrCoMn is studied. The STS630 and Ti64 powders are deposited on the MEAs. Joint delamination and cracks are observed after the deposition of Ti64 on the MEAs, whereas the deposition of STS630 on the MEAs is successful, without any cracks and joint delamination. The microstructure around the fusion zone interface is characterized by scanning electron microscopy and X-ray diffraction. Intermetallic compounds are formed at the interfacial regions of MEA-Ti64 samples. In addition, Vicker's hardness value increased dramatically at the joint interface between MEAs and Ti-6Al-4V compared to that between MEAs and STS630. This result is attributed to the brittle nature of the joint, which can lead to a decrease in the joint strength.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.402-409
• /
• 2024

High energy neutron irradiations impact on structural and electrical properties of alumina are studied with particular emphasis on real time in-situ radiation induced conductivity measurement in low flux region. Polycrystalline Al₂O₃ samples are subjected to high energy neutrons produced from D-T neutron generator and Am-Be neutron source. 14 MeV neutrons from D-T generator are chosen to study the role of fast neutron irradiation in the structural modification of samples. Real time in-situ electrical measurement is performed to investigate the change in insulation resistance of Al₂O₃ due to radiation induced conductivity at low flux regime. During neutron irradiation, a significant transient decrease in insulation resistance is observed which recovers relative higher value just after neutron exposure is switched off. XRD results of 14 MeV neutron irradiated samples suggest annealing effect. Impact of relatively low energy neutrons on the structural properties is also studied using Am-Be neutrons. In this case, clustering is observed on the sample surface after prolonged neutron exposure. The structural characterizations of pristine and irradiated Al₂O₃ samples are performed using XRD, SEM, and EDX. The results from these characterizations are analysed and interpreted in the manuscript.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.905-908
• /
• 2008

In this paper, an Adaptive Modulation (AM) system with an efficient turbo-coded Vertical-Bell-lab Layered Space-Time (V-BLAST) technique is proposed. The proposed decoding algorithm adopts iteratively the extrinsic information from a Maximum a Posteriori (MAP) decoder as a priori probability in the two decoding procedures of the V-BLAST scheme of ordering and slicing. In this analysis, each MIMO channel is assumed to be a part of the system of performance improvement.