• 한국컴퓨터산업학회논문지
• /
• 제2권9호
• /
• pp.1155-1162
• /
• 2001

본 논문은 UNIX 시스템의 최적 이용률(Optimal Utilization)을 결정하는 방법을 제시한다. 제시된 방법은 사용자가 인내할 수 있는 응답시간(Tolerable Response Time)을 제공하는 범위에서 사용자에게 허용될 수 있는 최대 이용률이 최적 이용률이 된다는 정의(Definition)를 근거로 하여 개발되었다. 인내할 수 있는 응답시간이 길어지면 최적 이용률도 높아지므로 최적 이용률은 인내할 수 있는 응답시간의 최대값에서 구해진다. 인내할 수 있는 응답시간은 서비스 목표(Service Objective)가 주어지면 도출해 낼 수 있다. 본 논문에서는 인내할 수 있는 응답시간이 0.24초라는 것과 최적 이용률의 세 가지 구성요소는 %wio, %sys, %usr 이라는 것을 보여준다. 또한 최적 이용률을 결정하는 실제의 과정을 예시하기 위하여 UNIX 운영체제를 사용하는 IBM 컴퓨터의 최적 이용률을 구하는 과정을 예시한다.

• 한국정보처리학회논문지
• /
• 제2권5호
• /
• pp.807-813
• /
• 1995

본 논문은 UNIX 시스템의 최적 이용율(Optimal Utilization)을 결정하는 방법을 제시한다. 제시된 방법은 사용자가 인내할 수 있는 응답시간(Tolerable Response Time) 을 제공하는 범위에서 사용자에게 허용될 수 있는 최대 이용율이 최적 이용율이 된다 는 정의(Definition)를 근거로하여 개발되었다. 인내할 수 있는 응답시간이 길어지면 최적 이용율도 높아지므로 최적 이용율은 인내할 수 있는 응답시간의 최대값에서 구해 진다. 인내할 수 있는 응답시간은 서비스 목표(Service Objective) 가 주어지면 도출 해낼 수 있다. 본 논문에서는 인내할 수 있는 응답시간이 0.24초라는 것과 최적 이용 율의 세가지 구성요소는 %wio, %sys, %usr이라는 것을 보여준다. 또한 최적 이용율을 결정하는 실제의 과정을 예시하기 위하여 UNIX 운영체제를 사용하는 IBM 3081 컴퓨터 의 최적 이용율을 구하는 과정을 보여준다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.101-106
• /
• 2008

Zonal cavity method, which is a kind of the lumen method, is used the calculation of the average illuminance on the workplane in an interior. Important factors of the method are cavity ratio, coefficient of utilization, and light loss factor. A Coefficient of Utilization varies with a kind of luminaires and is affected by surface reflectance of space. For this, the data from Coefficient of Utilization computation were analyzed with the same lumens and different photometry. This paper analyzes the changes of Coefficients of Utilization on the photometry of luminaires and surface reflectance of space.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권3호
• /
• pp.1113-1135
• /
• 2018

Existing trust evaluation models for wireless sensor networks can accurately and objectively evaluate trust value of nodes, but the nodes' energy saving problem was ignored. Especially when there are a few malicious nodes in a network, the overall trust value calculation for all nodes would waste lots of energy. Beside that, the network failure caused by nodes death was also not considered. In this paper, we proposed a method for avoiding energy hole which applied trust evaluation models and a trust evaluation method based on information entropy, so as to achieve the purpose of improving nodes utilization. Simulation results show that the proposed method can effectively improve nodes utilization, and it has reasonable detection rate and lower false alert rate compared to other classical methods.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권7호
• /
• pp.1031-1035
• /
• 2002

This study was carried out to obtain conjugated linoleic acid (CLA) producing lactic acid bacteria for further study on the enzymes related to the production of CLA which has gained considerable attention and on the development as a probiotic culture. Total 34 lactic acid bacteria were isolated from 19 feces samples of healthy babies. CLA forming ability was measured spectrophotometrically by the modification of linoleate 12-cis, 11-trans-isomerase activity measuring method, and CLA of the cultures were extracted, methylated, and examined by HPLC analysis. CLA methyl ester of only one culture showing the highest value of CLA forming ability could be detected by HPLC analysis. The culture was found to be Gram positive, rods and catalase negative. It grows at $45^{\circ}C$ but not at $15^{\circ}C$, and was identified to be Lactobacillus fermentum on the basis of the biochemical characteristics and the utilization of substrates. These results provide an efficient experimental method to screen CLA producing lactic acid bacteria.

• 전기학회논문지P
• /
• 제55권4호
• /
• pp.155-160
• /
• 2006

In this paper, deduced suitable optimization to request output condition after taking closely characteristic data of single phase induction motor(SIM) which is the possibility becoming economic is coming to be demanded. Motor proper move connection data took advantage of result of existing data and iron loss and copper loss, mechanical loss took advantage of statistical data, and decide motor move laking advantage of saving data and secondary resistance and optimum purpose of method that is proposed through single phase induction motor and comparison performance evaluation having on the same output parameter. That decide material factor, electric power damage ratio, and coefficient of utilization for optimum function by method that search request output and optimum values of efficiency case by case and decided is proper that is saved after take magnetizing reactance relationship. This research result which it sees against a material expense with use coefficient of utilization which is included in loss expense decides the same plan variable back the place efficiency is useful and will be applied.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.570-575
• /
• 2013

Enhancing utilization of buildings is gaining in importance in response to a challenging economy; thus, there is a need for a method that analyzes space, user, and user activity in an integrated way to provide project stakeholders with utilization information to support their decision-making about buildings. Conventional methods, such as architectural programming and post-occupancy evaluation, lack a formal relationship between user activity and other information, and therefore, are coarse-grained. This relationship has been formalized by two relatively new methods that provide fine-grained utilization information: workplace planning and space-use analysis. We characterize these two methods with focuses on their usage in different phases (i.e., planning, design, occupancy), required information that needs to be gathered, and the achievement and limitations in terms of three criteria, i.e., consistency, efficiency, and transparency. This characterization would not only help project stakeholders select and use a method that best meets their purposes for enhancing utilization of their buildings, but also provide researchers with promising research topics regarding enhancing utilization of buildings.

• 한국병원경영학회지
• /
• 제12권4호
• /
• pp.119-142
• /
• 2007

Although Korea joined OECD in 1996, there has still seen much unbalance in medical care and welfare standard between urban and rural area. The unbalance of medical demand between urban and rural area deepened low utilization of rural hospitals. So it caused many hospital's failure and conversion in rural area. Many rural hospitals are in difficulty managing business because of low medical demand along with the shortage of medical manpower, medical equipment and facilities. The objectives of this study were to reveal the cause of low utilization of hospitals in rural area, and to increase utilization of those hospitals. In this study the improvement methods of rural hospital's utilization were presented by examining were placed in difficult management condition, in respect of hospital's management conditions, manpower input, patient medical treatment record, financial record, and actual output. The causes of rural hospital's low utilization were as follows; 1) changes in number and structure of population 2) rural people's preference for large hospitals and hospitals which located in urban area 3) rural hospitals lacking in hospital management skill. Consequently rural hospital's operation condition got more and more deteriorated. To raise rural hospital's utilization, method for social policy, method for health policy, and intrinsic method of hospitals were presented in turn. For rural residents to utilize medical service conveniently, it is necessary for rural hospitals operated normally. So government must insist that rural hospitals solve the problems which come out from their internal management problems. And also these rural hospitals should be supported and nurtured by the government until their management is operated normally.

• 한국정보통신학회논문지
• /
• 제14권10호
• /
• pp.2277-2282
• /
• 2010

시간 복잡도가 O(1)인 실시간 비주기 태스크 스케줄링 방법 중 하나인 합성 이용율 방법은 주기 태스크들을 고려하지 않고 단지 비주기 태스크들을 위한 스케줄링 방식이다. 하지만 실제로 비주기 태스크는 대부분의 경우에 주기 태스크와의 혼합된 형태로 스케줄링이 이루어지며, 주기 태스크의 스케줄링을 보장하면서 비주기 태스크의 스케줄링 가능성을 판단해야 한다. 본 논문에서는 주기태스크와 비주기 태스크가 혼합된 태스크 집합을 합성 이용율을 이용하여 스케줄링하기 위한 방법을 제시하였으며 기존의 비주기 서버를 이용하여 혼합된 형태의 태스크 집합을 스케줄링 하는 방법에 비해 최대 20%의 스케줄링 성능이 향상됨을 보였다.

• 한국정보통신학회논문지
• /
• 제19권2호
• /
• pp.351-356
• /
• 2015

다중프로세서 시스템에서 실시간 비주기 태스크 스케줄링 방법 중 하나인 합성 이용율 방법은 주기 태스크들을 고려하지 않고 단지 비주기 태스크들을 위한 스케줄링 방식이다. 하지만 실제로 비주기 태스크는 대부분의 경우에 주기 태스크와의 혼합된 형태로 스케줄링이 이루어지며, 주기 태스크의 스케줄링을 보장하면서 비주기 태스크의 스케줄링 가능성을 판단해야 한다. 본 논문에서는 다중프로세서 시스템에서 주기태스크와 비주기 태스크가 혼합된 태스크 집합을 개선된 합성 이용율을 이용하여 스케줄링하기 위한 방법을 제시하였으며, 기존의 비주기 서버를 이용하여 혼합 태스크 집합을 스케줄링 하는 방법보다 스케줄링 성능이 향상됨을 보였다.