• KIEAE Journal
• /
• 제13권5호
• /
• pp.51-57
• /
• 2013

Energy saving starts by knowing how much energy is being consumed. A building factor is easier than any other things in energy saving. Since, especially, it is closely connected with user's space-use-patterns and manager's utility-operation-style. An energy metering system lets building users know about energy consumption pattern in buildings and measure energy in real time. Development and materialization of metering systems need more careful plans, so that they depend on a demand of individual facilities and available infrastructures they used to use. But, so far, there is no guidelines how to install metering systems. This paper suggested how to install meters and researched a method for how to analyze by using metered data. For that, Green Building in KIER is used as a test bed. As the results, nevertheless the smallest number of meters is basically one for the whole building energy measuring, it is too limited in analysis. So we needed to add the sort of fuel and utility types and found that it depends on all cases. For this reasons, a guideline should be created in order to install meters as soon as possible. It would be suggest a way to save more energy in building factor.

• Journal of Advanced Navigation Technology
• /
• 제22권5호
• /
• pp.420-428
• /
• 2018

In this paper, represented uninterruptible power supply (UPS) equipment maintaining constant output voltage, the proposes a photovoltaic system constructed with a step up boosting chopper and single phase pulse width modulation (PWM) voltage source inverter. as power source disconnection, voltage variation and output current variation with load variation. This system is driven by being synchronized voltage fed inverter and AC source, and in the steady state of power source charge battery connected to DC side with solar cell using a Photovoltaic that it was so called constant voltage charge. It can be results of saving electric power, and through a normal operation of energy storage system (ESS), the system operated the LED a calling on signal changes at the airport in an efficient manner. In addition, better output waveform was generated because of PWM method, and it was proved to test by experiment maintained constant output voltage regardless of AC source disconnection, load variation, and voltage variation of AC power source.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제18권2호
• /
• pp.142-149
• /
• 2004

This paper presents a neural network controller of a grid-connected wind energy conversion system for extracting maximum power from wind and a power controller to transfer the maximum power extracted into a utility grid. It discusses the modeling and simulation of the wind energy conversion system with the controllers, which consists of an induction generator, a transformer, a link of a rectifier, and an inverter. The paper describes tile drive train model, induction generator model and grid-interface model for dynamics analysis. Maximum power extraction is achieved by controlling the pitch angle of the rotor blades by a neural network controller. Pitch control method is mechanically complicated, but the control performance is better than that of the stall regulation. The simulation results performed on MATLAB show the variation of the generator torque, the generator rotor speed, the pitch angle, and real/reactive power injected into the grid, etc. Based on the simulation results, the effectiveness of the proposed controllers is verified.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.120-128
• /
• 2015

In this paper, Residential roof top photovoltaic system with 9.9 kW design is proposed. The system composed of 200 Watts solar array 33 panels connecting in series 10 strings and parallels 3 strings which have maximum voltage and current are 350 V and 23.8 A. The 10 kW sinusoidal grid-connected inverter with window voltage about 270-350 is selected to convert and transfer DC Power to AC Power at PCC (Point of Common Coupling) of power system following to utility standard. However the impact of fluctuation and uncertainty of weather condition of PV may decrease the voltage stability and voltage collapse of power system. In order to solve this problem the energy storage such 120 V 1200 Ah battery bank and 30 kVAR capacitor are designed for voltage stability control. The other expensed for installing the system such battery charger, cable, accessories and maintenance cost are concerned. The economic analysis by using investment from money loan with interest about 7% and use own money which loss income of deposit about 3% are calculated as 671,844 and 547,044 for PV system with energy storage and non energy storage respectively. The solar energy from PV is about 101,616 Bath per year which evaluated by using the value of $5kWh/m^2/day$ from average peak sun hour (PSH) of the Thailand and 6.96 Bath/kWh of Feed in Tariff Incentive. The payback periods of four scenarios are proposed follow as i) PV system with energy storage and use loan money is 15 years ii) PV system with no energy storage and use loan money is 10 years iii) PV system with energy storage and use deposit money is 9 years iv) PV system with energy storage and use deposit money is 7 years. In addition, the other scenarios of economic analysis such no FIT support and other type of economic analysis such NPV and IRR are proposed in this paper.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제16권6호
• /
• pp.587-593
• /
• 2011

A new high power density and low cost Photovoltaic Power Conditioning System (PV PCS) with energy storage system is proposed. Its high power density and cost effectiveness can be achieved through the unification of the maximum power point tracker and battery charger/discharger. Despite of the reduced power stage, the proposed system can achieve the same performances of maximum power point tracking and battery charging/discharging as the conventional system. Moreover, the high voltage stress across the link-capacitor can be relieved through the series-connected link-capacitor with the battery. Therefore, a large number of series/parallel-connected link-capacitors can be reduced by 4-times. Especially, when the utility power failure happens, both photovoltaic and battery energies can be supplied to the load with only one power stage. Therefore, it features a simpler structure, less mass, lower cost, and fewer devices. Finally, to confirm the operation, validity, and features of the proposed system, theoretical analysis and experimental results from a single phase AC 220Vrms/1.5kW prototype are presented.

• International Commerce and Information Review
• /
• 제14권3호
• /
• pp.585-610
• /
• 2012

There have been various attempt to offer commercial service of electronic payment. Actually, however, there has been few electronic payment model that are being used commercial service. Among them, it is estimated that only TSU(Trade Service Utility) of SWIFT will be succeed in providing commercial service possibility. In Korea e-L/C Distribution & Management System was constructed and become the first e-L/C service on a global basis via e-Trade Facilitation 3 Years Project and then started offering the world first e-L/C service. Some scholars have insisted the opinion that SWIFT L/C means e-L/C, but such opinion may be wrong because SWIFT L/C means the L/C advised by SWIFT(Society for Worldwid Interbank Financial Telecommunication) under the condition that a series of procedure from the issuance of L/C to the advice is done by SWIFT system. Because perfect e-L/C should be organically connected by SWIFT network and also, the e-L/C business between overseas banks and their customers should be organically linked with each other. The purpose of this paper is contribute to the commercialization of e-L/C distribution system by studying the current status of infrastructure concerned with domestic and overseas electronic payment and future e-payment infrastructure, seeking to be introduced internationally by doing things.

• Strategy21
• /
• 통권37호
• /
• pp.65-103
• /
• 2015

This study is an attempt to look into the future role of the ROKN and to provide a strategic way forward with a special focus on naval strategic concept and force planning. To accomplish this goal, this research takes four sequential steps for analysis: 1) assessing the role and utility of naval power of ROKN since its foundation back in 1945; 2) forecasting features of various maritime threats to influence the security of Korea in the future directly or indirectly; 3) identifying the roles to be undertaken by future ROKN; and 4) recommending Korean way of naval force planning and the operational concept of naval power. This study seeks to show that ROKN needs comprehensive role to better serve the nation with respect to national security, national prosperity and development, and future battle-space management. To safeguard the national security of Korea, it suggests three roles: 1) national guard for the peaceful unification; 2) protector of the maritime sovereignty; and 3) suppressor to maritime threats. Three more roles are highlighted for national prosperity: 1) escort of the national economy; 2) guardian for national maritime activities; and 3) contributor to the world peace. These roles need to be closely connected with the role for the battle-space management. This paper addresses the need for a dramatic shift of the central operational domain from land to maritime in the future. This will eventually offer future ROKN a leading role for developing strategic concept and force planning rather than merely a supporting one. This study finally suggests 'balanced' strategy both in concept development and force planning. A balanced force planning is a 'must' rather than an 'option' when considering a division of function between Task Fleets and Area Fleets, constructing cutting-edge conventional forces such as Aegis destroyer, CVs, or submarines, and the mix of high-profile platform and low-profile when composing future fleets. A 'balance' is also needed in operational concept. The fleet should be prepared to fulfill its missions based on two different types of force operation i.e., coercive or cooperative application of the utility of naval force. The findings and recommendations of the study are relevant today, and will be increasingly important in the future to achieve various political goals required by enhancing the utility of naval power.

• Korean Institute of Interior Design Journal
• /
• 제21호
• /
• pp.107-113
• /
• 1999

The purpose of this study is to suggest the materials for developing the new house style by analysing the space characteristics of wood frame houses in suburbs of Seoul. For this, we analysed 45 drawings(site plan, floor plan, elevation, section) that were designed by MICHOO, WOOD-LAND, STUGA and CHOWONJUTECK company etc. The space design characteristics that we found are as follows; 1. The wood is fragile to humidity. Therefore this characteristic is especially considered in designing the space of bathroom and utility room. 2. It is the merit of wood frame house that inner space can be designed variously by using spilt-level and the slope of roof. 3.The public space and private space are completely separated in most cases and the stair is located in the middle of house. This structure of house is short of horizontal openness. Instead, most houses gets vertical openness by making second floor on the living room opev. 4. In wood frame house as the rural house, the outer space is well used by setting up deck and balcony. The outer spaces like deck and balcony are usually used as a part of life space in connected with living room, dining room, master bed room and family room. 5. The public spaces like kitchen, living room, dining room and family room are considered so important in design that those are arranged in front in order to have good outlook and directiov.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제25권2호
• /
• pp.113-119
• /
• 2011

A frequency in electrical power system changes by the load fluctuation in utility grid, has an influence on a connected generator, and ultimately brings a big trouble in the power system. Therefore, a quick measurement of system frequency and governor control of power system is a very important factor in the reliability and the economic feasibility. Electromagnetic frequency relays in the past had the large power consumption and the difficulty of accurate measurement. After Researched and developed digital relays are very affected by the noise and the distortion, and the recently developed Microprocessor relays have problems of expensive device and time when measuring the frequency at 50[ms]. In this study, An improve algorithm that measures the power system frequency quickly and accurately is suggested, simulated by using Matlab and programmed using C code through DSP6713 KIT. This algorithm is tested to the arbitrary voltage waveform input. The results show that the suggested algorithm is effective in the accurate and quick frequency measurements.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• 제53권2호
• /
• pp.97-103
• /
• 2004

CHP system supplies electricity and heating together with high efficiency. Current utility's CHP system uses electric power by itself and sells thermal energy to KDHC(Korea District Heating Corporation). CHP's operation cost except sales revenue of heating was covered by the sale revenue of electricity. Thus Electric generation cost in district Heating CHP system has close relationship with the level of heating price. However, after the restructuring of electricity industry, the operation cost could not be covered by sales revenue of heating and electricity. This loss was compensated by energy subsidy program in the electric power industry infrastructure fund. This paper suggests reasonable evaluation and improvement methods of the loss calculation of CHP system utilizing the infrastructure fund efficiency In terms of the direction of support by the fund, it provides the methods to prevent inefficient operation through setting up the upper limit of subsidy and to improve the loss calculation. Moreover, it suggest fixed rate support by heating supply level and reducing subsidy gradually for an efficient operation of CHP system.