• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.577-578
• /
• 2009

For cases where the column concrete strength exceeds 1.4 times the slab concrete strength, the KCI Code requires that either: puddled high-strength concrete(HSC) be used in the slab, or the use of vertical dowels and spirals through the joint, or the use of an effective concrete strength in the joint. This paper studies on the third strategy. A prediction model of the effective concrete strength for interior columns was proposed using an analogy of brick and mortar in brick masonry. The proposed prediction model is verified by comparison with experimental results and various design equations.

• Journal of Communications and Networks
• /
• 제12권6호
• /
• pp.605-615
• /
• 2010

Intercarrier interference (ICI) in orthogonal frequency division multiplexing (OFDM) systems, which causes substantial performance degradation in time-varying fading channels, is analyzed. An equivalent spreading code formulation is derived based on the analogy of OFDM and code division multiple access (CDMA) systems. Techniques as linear multiuser detection in CDMA systems are applied to suppress the ICI in OFDM systems. The performance of linear detection, measured using multiuser efficiency and asymptotic multiuser efficiency, is analyzed given the assumption of perfect channel state information (CSI), which serves as an upper bound for the performance of practical systems. For systems without CSI, time domain and frequency domain channel estimation based linear detectors are proposed. The performance gains and robustness of a linear minimum mean square error (LMMSE) filter over a traditional filter (TF) and matched filter (MF) in the high signal-to-noise ratio (SNR) regime are demonstrated with numerical simulation results.

• Interaction and multiscale mechanics
• /
• 제1권3호
• /
• pp.339-355
• /
• 2008

A Galerkin meshfree method is presented for analyzing shear deformable cylindrical panels. Based upon the analogy between the cylindrical panel and the curved beam a pure bending mode for cylindrical panel is rationally constructed. The meshfree approximation employed herein is characterized by an enhanced moving least square or reproducing kernel basis function that can exactly represent the pure bending mode and thus meets the requirement of Kirchhoff mode reproducing condition. The variational form is discretized using the efficient stabilized conforming nodal integration with a smoothed nodal gradient based curvature. The resulting meshfree formulation satisfies the integration constraint for bending exactness. Moreover, it is shown here that the smoothed gradient preserves several desired properties which are valid for the standard gradient obtained by direct differentiation, such as partition of nullity and reproduction of a constant strain field. The efficacy of the proposed approach is demonstrated by two benchmark cylindrical panel examples.

• ETRI Journal
• /
• 제16권4호
• /
• pp.13-25
• /
• 1995

We have derived a nonlinear spatiotemporal differential equation for space-charge fields from Kukhtarev’s material equations in a moving coordinate system and obtained the spatial subharmonic instability boundaries by using linear stability analysis. It is also found that there is an analogy between the temporal subharmonic and the spatial subharmonc instabilities in the sense that the governing differential equations describing the instability boundaries are formally identical. The experiments for generating spatial subharmonic waves are performed in a photorefractive $Bi_{12}SiO_{20}$ crystal by using conventional moving grating technique. The threshold detunings are experimentally determined and the results are compared with the theory.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.416-421
• /
• 2001

This paper presents the numerical prediction of sound generated by viscous flow past a circular cylinder. The two dimensional flow field is predicted using FEM based Reynolds-averaged Navier-Stokes solver, and the calculated unsteady fluid field values are utilized by an acoustic code that implements Ffowcs Willianms-Hawkings(FW-H) equation. The integration surface used in acoustic analysis is extended from the cylinder surface to permeable surfaces. The 2D based CFD calculations overpredict the acoustic amplitude, however, if adequate correlation length is used, the predicted acoustic amplitude agrees well with experiment. The predictions using extended integral surface in FW-H equation show results that contain the characteristics of quadrupole - volume integration - noise term, and do not vary seriously with the integral surface location.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1063-1066
• /
• 2002

An equivalent circuit for the superconductor flux flow transistor(SFFT) was combined with high temperature cooling device, based on the analogy between thermal and electrical variables using the high-temperature superconductor(HTS), is proposed. The device is composed of parallel weak links with a nearby magnetic control line. A model has been developed that is based on solving the equation of motion of Abrikosov vortices subject to Lorentz viscous and pinning forces as well as magnetic surface barriers. The use of thermal models the global performance of thermal cooling circuit and signal system to be checked by using electrical circuit analysis programs such as SPICE.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.43-50
• /
• 2002

Main goal of this study is to develop MATLAB programming for exact analysis of distortional deformation of the straight box girder. For this purpose, a theory for distortional deformation theory is firstly summarized and then a BEF (Beam on Elastic Foundation) theory is presented using analogy of the corresponding variables. Finally, the governing equation of the beam-column element on elastic foundation is derived. An element stiffness matrix of the beam element is established via a generalized linear eigenvalue problem. In order to verify the efficiency and accuracy of the element using exact dynamic stiffness matrix, buckling loads for the continuous beam structures with elastic foundation and distortional deformations of box girders are calculated.

• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.532-548
• /
• 2002

A hybrid model consisting of a modified TAB (Taylor Analogy Breakup) model and DVM (Discrete Vortex Method) is proposed for numerical analysis of the evaporating spray phenomena in diesel engines. The simulation process of the hybrid model is divided into three steps. First, the droplet breakup of injected fuel is analyzed by using the modified TAB model. Second, spray evaporation is calculated based on the theory of Siebers'liquid length. The liquid length analysis of injected fuel is used to integrate the modified TAB model and DVM. Lastly, both ambient gas flow and inner vortex flow of injected fuel are analyzed by using DVM. An experiment with an evaporative free spray at the early stage of its injection was conducted under in-cylinder like conditions to examine an accuracy of the present hybrid model. The calculated results of the gas jet flow by DVM agree well with the experimental results. The calculated and experimental results all confirm that the ambient gas flow dominates the downstream diesel spray flow.

• 대한화학회지
• /
• 제45권2호
• /
• pp.177-182
• /
• 2001

비유 추론의 도식 이론과 요소 과정 이론을 바탕으로 다중 비유를 요소 과정에 따라 사용한 MACP 수업 모형을 고안하였다. 이 모형은 다중 비유물 소개, 비유물의 공통 속성 추출, 목표 상황 제시, 비유물고 목표물의 대응, 목표 개념 도출, 다른 상황에서의 적용 등 6단계로 구성되었다. 이 모형의 교수 효과를 학생들의 개념 이해와 학습 동기의 측면에서 TWA 모형에 의한 수업 및 비유를 사용하지 않는 수업과 비교하였다. 중학교 2학년 3개 반을 선정하여 MACP 집단, TWA 집단, 통제 집단으로 무선 배치한 후, 화학 변화와 화학 반응에 대한 수업을 10차시 동안 실시하였다. 공변량 분석 결과, MACP 집단의 과학 개념 검사 점수가 통제 집단에 비해 유의미하게 높았으나, 학습 동기 검사 점수는 집단간에 유의미한 차이가 나타나지 않았다.

• 대한수학교육학회지:학교수학
• /
• 제18권3호
• /
• pp.589-609
• /
• 2016

본 논문에서는 중세 시대 아랍의 수학자 오마르 카얌(Omar Khayyam)이 제시한 삼차방정식의 기하학적 해법을 현대적으로 재해석하고 두 개의 원뿔곡선을 활용한 삼차방정식의 기하학적 해법이 갖는 교수학적 의미를 고찰하였다. 이를 바탕으로 삼차방정식 $x^3+4x=32$, $x^3+ax=b$, $x^3=4x+32$, $x^3=ax+b$의 기하학적 해법을 '대수와 기하의 연결', '귀납 및 일반화', '유추를 통한 유사한 해법의 연결' 관점에서 교육적으로 활용할 수 있는 방법과 적용 가능한 교수학적 시사점을 제시하고자 하였다. 삼차방정식을 기하학적으로 해결하면서 '대수와 기하의 연결'의 관점에서 삼차방정식의 대수적 표상과 원뿔곡선이라는 기하학적 표상의 상호 전환을 다룰 수 있다. 또한 '귀납 및 일반화'의 관점에서는 계수 및 상수항이 구체적인 수로 제시된 방정식의 기하학적 해법을 변수가 포함된 삼차방정식의 해법으로 일반화하는 과정을 다룰 수 있으며, '유추를 통한 유사한 해법의 연결'의 관점에서 문제의 해법과 관련된 유사한 절차와 방법을 새로운 문제의 해결에 적용할 수 있는 기회를 제공할 수 있을 것이다.