• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.39-46
• /
• 2005

This paper use virtual running after possible traffic capacity application for optimal route location. General road is designed the design after we examine an alternate adequacy investigation and an execution design sufficiently. Various road user's requirement must be reflected from the beginning. But it is difficult to contain the various suitable design criteria because we consider the existing 2-dimension element. First of all, this study chose optimal route, used traffic assignment and 3D simulation. Then selected optimal route through the consistent road construction by analyzing road driving simulation of 3-dimension data and the urban landscape. possible traffic capacity and virtual running will be able to do the urban landscape analysis harmonizing with the environment; equally, it could be objectively solve the problem of a civil appeal.

• Structural Engineering and Mechanics
• /
• v.27 no.4
• /
• pp.477-499
• /
• 2007

The main purpose of this paper is to investigate the ultimate behavior of steel cable-stayed bridges with design variables and compare the validity and applicability of computational methods for evaluating ultimate load capacity of cable-stayed bridges. The methods considered in this paper are elastic buckling analysis, inelastic buckling analysis and nonlinear elasto-plastic analysis. Elastic buckling analysis uses a numerical eigenvalue calculation without considering geometric nonlinearities of cable-stayed bridges and the inelastic material behavior of main components. Inelastic buckling analysis uses an iterative eigenvalue calculation to consider inelastic material behavior, but cannot consider geometric nonlinearities of cable-stayed bridges. The tangent modulus concept with the column strength curve prescribed in AASHTO LRFD is used to consider inelastic buckling behavior. Detailed procedures of inelastic buckling analysis are presented and corresponding computer codes were developed. In contrast, nonlinear elasto-plastic analysis uses an incremental-iterative method and can consider both geometric nonlinearities and inelastic material behavior of a cable-stayed bridge. Proprietary software ABAQUS are used and user-subroutines are newly written to update equivalent modulus of cables to consider geometric nonlinearity due to cable sags at each increment step. Ultimate load capacities with the three analyses are evaluated for numerical models of cable-stayed bridges that have center spans of 600 m, 900 m and 1200 m with different girder depths and live load cases. The results show that inelastic buckling analysis is an effective approximation method, as a simple and fast alternative, to obtain ultimate load capacity of long span cable-stayed bridges, whereas elastic buckling analysis greatly overestimates the overall stability of cable-stayed bridges.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.145-151
• /
• 2010

Voltage unbalance is regarded as a power quality problem of significant at the user application. Although the voltages are quite well balanced at the transmission system, the voltage level of utilization can be unbalanced due to the unequal system impedances and the unequal distribution of single phase loads. Capacitor is generally used for power-factor compensation and reducing harmonics of non linear load with reactor. If voltage unbalance exists, current unbalance is generated and it will be reflected in the capacity variance. When the reactor and condenser are used at the same location, generally its trouble rate is high. And it is very important checking out that how the variance of voltage, current and capacity of condenser is proceeded by the voltage unbalance. In this paper, we calculated that voltage, current and capacity of condenser are within the tolerance limit of official regulations in the event of voltage unbalance with/without reactor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1037-1047
• /
• 2001

In this paper, the capacity for the reverse link of the imperfect power controlled DS/CDMA hierarchical cellular system is analyzed considering imperfect sectorization in shadowing environment. Unlike the theoretical assumption, the power control of the DS/CDMA hierarchical cellular system is not perfect. Therefore, we consider various parameters such as the imperfect power control, the imperfect sectorization, the processing gain and the number of microcell interferers, which cause the capacity variation of the DS/CDMA hierarchical cellular system. It is shown that the capacity of DS/CDMA hierarchical cellular system is decreased according to the increase of the deviation of the imperfect power control, the overlapped angle, the power ratio between macrocell and microcell and to the decrease of processing gain, the number of microcell interfering users. Also, it is observed that the hierarchical cellular system can increase the user capacity from 1.54 to 3.89 times compared to the homogeneous macro-cellular system.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.408-414
• /
• 1999

In this paper, we propose the method using coherent detection with time division multiple pilot signal for each users I reverse CDMA channel as the structure of reverse CDMA channel to apply CDMA to upstream channel of bidirectional LMDS. By using coherent detection with pilot signal in reverse CDMA channel, capacity can be improved when compared with noncoherent detection, but it is required to allocate pilot signal for all user. And then interference is increased due to allocate continuously the pilot signals. In this case channel capacity is decreased. The method f pilot allocation is needed that reduce this interference and keep synchronization effect using coherent detection, In the reverse link, the pilot allocated to each users at different time and not overlapped is possible solution for it. this pilot is proposed and analyzed its performance and capacity. The result is that proposed method has more increased capacity compared wit others.

• ETRI Journal
• /
• v.29 no.2
• /
• pp.153-161
• /
• 2007

In this paper, we analyze the algorithm of the methodology developed by ITU for the calculation of spectrum requirements of IMT-Advanced. We propose an approach to estimate user density using traffic statistics, and to estimate spectrum efficiencies using carrier-to-interference ratio distribution and capacity theory as well as experimental data under Korean mobile communication environments. We calculate the IMT-Advanced spectrum requirements based on the user density and spectral efficiencies acquired from the new method. In the case of spectral efficiency using higher modulation and coding schemes, the spectrum requirement of IMT-Advanced is approximately 2700 MHz. When applying a $2{\times}2$ multiple-input multiple-output (MIMO) antenna system, it is approximately 1500 MHz; when applying a $4{\times}4$ MIMO antenna system, it is approximately 1050 MHz. Considering that the development of new technology will increase spectrum efficiency in the future, the spectrum requirement of IMT-Advanced in the Korean mobile communication environment is expected to be approximately 1 GHz bandwidth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2581-2594
• /
• 2018

The microcell terrain is the most common wireless network terrain in our life. In order to solve wireless network optimization of weak coverage in the microcell terrain, improve call quality and reduce the cost of the premise, power amplifiers in base stations should be adjusted according to user volume. In this paper, characteristics of microcell topography are obtained after analysis. According to the topography characteristics of different microcells, changes in the number of users at different times have been estimated, meanwhile, the number of scatter users are also obtained by monitoring the PCCPCH RSCP and other parameters. Then B-Spline interpolation method has been applied to scatter users to obtain the continuous relationship between the number of users and time. On this basis, power amplification can be chosen according to changes in the number of users. The methods adopted by this paper are also applied in the engineering practice, sampling and interpolation are used to obtain the number of users at all times, so that the power amplification can be adjusted by the number of users in a microcell. Such a method is able to optimize wireless network and achieve a goal of expanding the area of base stations, reduce call drop rate and increase capacity.

• Journal of Korea Multimedia Society
• /
• v.7 no.8
• /
• pp.1017-1024
• /
• 2004

Ubiquitous system requires intelligent environment and system that perceives context in a proactive manner. This paper describes proactive retrieval method using context patterns in ubiquitous computing. And as the user's contexts change, new information is delivered proactively based on user's context patterns. For proactive retrieval, we extract context patterns based on sequential pattern discovery and association rule in data mining. By storing only information to be needed in near future using the context patterns, we solved the problem of speed and storage capacity of mobile devices in ubiquitous computing. We explain algorithms and an example. Several experiments are performed and the experimental results show that our method has a good information retrieval.

• Journal of Korea Multimedia Society
• /
• v.18 no.11
• /
• pp.1391-1399
• /
• 2015

In recent times, studies sentiment analysis are being actively conducted by implementing natural language processing technologies for analyzing subjective data such as opinions and attitudes of users expressed on the Web, blogs, and social networking services (SNSs). Conventionally, to classify the sentiments in texts, most studies determine positive/negative/neutral sentiments by assigning polarity values for sentiment vocabulary using sentiment lexicons. However, in this study, sentiments are classified based on Thayer's model, which is psychologically defined, unlike the polarity classification used in opinion mining. In this paper, as a method for classifying the sentiments, sentiment categories are proposed by extracting sentiment keywords for major sentiments by using hashtags, which are essential elements of Instagram. By applying sentiment categories to user posts, sentiments can be determined through the similarity measurement between the sentiment adjective candidates and the sentiment keywords. The test results of the proposed method show that the average accuracy rate for all the sentiment categories was 90.7%, which indicates good performance. If a sentiment classification system with a large capacity is prepared using the proposed method, then it is expected that sentiment analysis in various fields will be possible, such as for determining social phenomena through SNS.

• Journal of Korea Multimedia Society
• /
• v.15 no.5
• /
• pp.632-638
• /
• 2012

A smartphone is one of the best candidate devices on which context based services can be provided because a smartphone has considerably powerful computing ability and large memory capacity and it is a personal belonging. One of the most important factors of context is the moving status of the smartphone. For example, if the smartphone is not moving and the user is in an exhibition room then we can conclude that the user is watching an exhibit. This paper proposes an algorithm of determining the moving status of a smartphone for the first time. Our test results showed that the proposed algorithm is 100% correct.