• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.93-100
• /
• 2013

Generally, the conventional battery charging system using an analog method has the large, heavy hardware and low efficiency. Also, it has the disadvantage that it is necessary to replace the control circuit on the basis of the characteristic curve of the specific battery cell. The proposed programmable digital LLC resonant charging system use high efficiency control system(CC-CV), and has characteristic a small hardware and advantage that a digital programming of the voltage, current, and battery capacity characteristics can be flexible. The system proposed the use of Half-bridge LLC resonant converter is possible to improve efficiency and reduce switching losses by using ZVS topology. Further, a constant voltage - constant current(CC-CV) control algorithm apply to the charger which using a buck converter. The performance of the proposed system is demonstrated through experiments.

• 한국통신학회논문지
• /
• 제41권7호
• /
• pp.765-767
• /
• 2016

건물 에너지 커미셔닝은 건축물의 계획, 설계, 시공, 시공 후 설비의 시운전 및 유지 관리를 포함한 전 공정을 효율적으로 검증하고 문서화하여 에너지의 낭비 및 운영상의 문제점을 최소화하는 공정 기술이다. 일반적인 커미셔닝은 설계 기준에 적합한 성능을 발휘할 수 있도록 설비의 교체를 추진한다. 이는 비용이 많이 들며 투자비 회수기간이 오래 걸리는 단점을 지니고 있다. 본 논문에서는 ICT(Information Communication Technology)를 기반으로 에너지 사용 데이터 분석을 통해 설비 교체를 최소화하며 최적 운용을 통해 에너지 효율을 높이는 모니터링 기반 커미셔닝에 대해 연구하였다. 건물 에너지 사용에 대한 모델링을 수행하고 이를 기반으로 에너지 사용 데이터와 비교, 효율 저하 감지 기술을 활용하여 운용 최적화를 통한 에너지 사용 절감을 이룬다.

• 한국태양에너지학회 논문집
• /
• 제21권2호
• /
• pp.1-8
• /
• 2001

The most effective methods for utilizing solar energy are to use the sunlight and solar thermal energy such as hybrid panel simultaneously and to use concentrator. From such a view point systems using various kinds of photovoltaic panels are constructed in the world. However, there has not been a hybrid panel with a concentrator. If the sunlight is concentrated on solar cell, cell conversion efficiency increases and the temperature of the solar cell s increases. As the temperature of the solar cells increases, the cell conversion efficiency gradually decreases. For maintaining the cell conversion efficiency constant, it is necessary to keep solar cell at low temperature. In this paper, after designing a concentration rate for concentrating, we propose a model for cooling the cell and for using wasted heat. And, we compare it with conventional panels after calculating the electrical and thermal efficiency, using the energy balance equation.

• 한국분무공학회지
• /
• 제11권4호
• /
• pp.220-227
• /
• 2006

Experimental studies has been conducted to investigate the effect of orifice diameter ratio on the mixing characteristics of the split element of doublet and triplet elements. The spray characteristics of non-reacting immiscible liquids have been investigated using a patternator. The local volume fraction is measured by use of mean value of each component. This volume measurement represents the mixing characteristics of the liquid, which affect the overall combustion efficiency. The ratio of the orifice diameter, ranging from 1 to 1.5, and that of the jet-momentum, ranging from 0.5 to 6.0, we used. The jet impinging behavior with use of various ratios exhibits substantially different mixing characteristics. Mixing efficiency is maximized when the jet-momentum ratio is increased; this behavior is particularly prominent when the orifice diameter ratio is greater than unity. The split of the triplet element yields better mixing characteristics and is more effective than that of the doublet element in regard to achieving high combustion efficiency. The optimum mixing factor for the triplet element is found to be 0.75, according to our measurement.

• 해양환경안전학회지
• /
• 제12권4호
• /
• pp.233-239
• /
• 2006

본 연구는 우리나라 RCC/RSC의 효율성을 2개의 투입자료와 4개의 산출자료를 이용하여 DEA법을 이용하여 측정하였고, 정성적 자료는 전문가의 설문 및 면접결과로 평가하였다. 또한, 이러한 자료를 통합하기 위한 방법은 의사결정지원시스템인 퍼지로직을 적용하였고, 이 평가방법을 이용하여 RCC/RSC의 운영효율성의 우선순위를 평가하였다. 그 결과 목포, 제주, 부산, 통영, 인천, 여수, 동해, 울산, 포항, 속초, 태안, 완도, 군산RSC 순으로 효율성이 높은 것으로 나타났다.

• 수산해양교육연구
• /
• 제20권3호
• /
• pp.500-507
• /
• 2008

Hot air drying is a method that let moistures evaporate by heat exchange between heating air and dry target. This way is dominating more than about 70% of dryers that the use extent is wide fairly, and is established in domestic than dryer that use conduction or radiation etc. Most of research about drying had been emphasized in size of device through analysis for these dry phenomenon plain, heating topology, and aspect of form and so on by dry target's special quality, and research about device development or waste heat withdrawal technology in energy utilization efficiency side is slight real condition. Therefore, in this study, Investigated numerically about thermal efficiency elevation that is leaned against as that change the temperature of inlet and outlet in heat exchanger of the hot air drying tower.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.200-202
• /
• 1987

Sintered CdS films on glass substrate with low electrical resistivity and high optical transmittance have been prepared by coating and sintering method. All-polycrystalline CdS/CdTe solar cells with different microstructure and properties of CdTe layer were fabricated by coating a number of CdTe slurries, which consisted of Cd and Te powders, an appropriate amount of propylene glycol and 2 or 7.5 w/o $CdC1_2$, on the sintered CdS films and by sintering the glass-CdS-(Cd+Te) composites at various temperature. To explore the dependence of the solar efficiency on the preparation conditions of the CdTe layer, Cd powder with an average particle size of $0.3{\mu}m$ or $5{\mu}m$ was prepared. The use of Cd with finer particles forms more dense or uniform microstructure of the nuclear of CdTe during the heating. Therefore the use of Cd with finer particles improves the efficiency of the sintered CdS/CdTe solar cell by improving the microstructure of sintered CdTe layer. But the difference of solar efficiency by varing a particle size of Cd is decreased with increasing amount of $CdC1_2$ in the (Cd+Te) layer. All-polycrystalline CdS/CdTe solar cells with an efficiency of 10.2% under solar irradiation have been fabricated using a Cd with finer particles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.463-466
• /
• 2001

The most effective methods of utilizing solar energy are to use the sunlight and solar thermal energy such as hybrid panel simultaneously and to use concentrator. From such a view point, systems using various kinds of photovoltaic panels were constructed in the world. However there have not been a type of panel using concentrator and hybrid simultaneously. If the sunlight are concentrated on the solar cell, cell conversion efficiency increase and the temperature of the solar cells increases. As the temperature of the solar cells increases, so cell conversion efficiency decreases. Therefore, for maintaining cell conversion efficiency at these conditions, it is necessary to keep the cell at low temperature. In this paper, after designing a concentrate rate for concentrating, we proposed model for cooling cell and using waste heat, and we compared with conventional panels after calculating the electrical and thermal efficiency using energy balance equation.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.15-22
• /
• 2011

It is a great interest to convert more energy in the heat source into the power and to improve the efficiency of power generating processes. Since the efficiency of power generating processes becomes poorer as the temperature of the source decreases, to use an ammonia-water mixture instead of water as working fluid is a possible way to improve the efficiency of the system. In this work performance of ammonia-water regenerative Rankine cycle is investigated for the purpose of extracting maximum power from low-temperature waste heat in the form of sensible energy. Special attention is paid to the effect of system parameters such as mass fraction of ammonia and turbine inlet pressure on the characteristics of system. Results show that the power output increases with the mass fraction of ammonia in the mixture, however workable range of the mass fraction becomes narrower as turbine inlet pressure increases and is able to reach 16.5kW per unit mass flow rate of source air at $180^{\circ}C$.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 춘계학술발표회
• /
• pp.67-72
• /
• 2005

본 연구는 우리나라 RCC/RSC의 효율성을 2개의 투입자료와 4개의 산출자료를 이용하여 DEA법을 이용하여 측정하였고, 정성적 자료는 전문가로 평가하였다. 또한 이러한 자료를 통합하기 위한 방법은 의사결정지원 시스템인 퍼지로직을 적용하였고, 이 평가방법을 이용하여 RCC/RSC의 운영효율성의 우선순위를 평가하였다. 그 결과 인천, 목포, 제주, 동해, 부산, 포항, 여수, 속초, 통영, 울산, 태안, 군산 RSC 순으로 효율성이 높은 것으로 나타났다.