• Journal of Electrical Engineering and Technology
• /
• v.1 no.2
• /
• pp.251-256
• /
• 2006

To design the effective usage of electric double layer capacitors (EDLCs) used for a storage device of dye sensitized solar cell (DSC) energy, we first investigated the accumulation state of electrical charges and the charge behavior in the EDLCs. Based on the results, the voltage characteristics of EDLCs connected to DSC energy were evaluated. The results showed that the charge accumulation region concentrated on the central part of the carbonaceous electrode in EDLCs and the required times for charging and discharging were almost the same.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.673-676
• /
• 2005

To design the effective usage of electric double layer capacitors (EDLCs) used for a storage device of dye sensitized solar cell(DSC) energy, we first investigated the accumulation state of electrical charges and the charge behavior in the EDLCs. Based on the results. the voltage characteristics of EDLCs connected to DSC energy were evaluated. The results showed that the charge accumulation region concentrated on central part of the carbonaceous electrode in EDLCs and the required times for charging and discharging were almost the same.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.324-327
• /
• 1996

In this paper, the affecting factors of the access demand for the cellular service are derived, and the access demand function of the cellular service is estimated. The results obtained in this study are as follows: First, the price (access charge) and the income elasticities of cellular services there exists a network externality in cellular communication services. Third, the technological capability of the service provider has played an essential role in expanding the size of subscribers. Fourth, the access demand of cellular communication service is not sensitive to the usage charge. According to the above results, it can be inferred that if the access charge is lowered, the number if subscribers will increase to the critical mass, and then the cellular communication market will grow up to a saturation point naturally.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.10
• /
• pp.733-738
• /
• 2012

It is important issue to reduce the electric energy to save the operating cost of HVAC system. Even if electrical energy is the clean energy, it is difficult and takes high cost for storage of electricity. These cause the high peak load of electric energy for HVAC in summer season. In korea, government impose the electric charge with several grade for the purpose of cut-off the peak load of electricity. Government has a policy to support to design and install the heat/ice storage system using midnight electricity. In this study, analysis of cooling load and operating characteristics for ice storage system are performed. And, also economical efficiency is compared between ordinary charge system of electricity and midnight rate charge of electricity. The systematic and economical supports are needed for expansion of usage of energy saving equipments.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1004-1009
• /
• 2003

Electroosmotic flow induced by an applied electrostatic potential field in microchannel is analyzed in this study. The electroosmotic flow is an alternative to pressure driven flow in microchannels, but the usage has been limited to the simple cases. In this study, We analyze electroosmotic flow driven by inhomogeneous surface charge on the channel wall. The surface charge varies along a direction perpendicular to the electric field in order to generate the electroosmotic flow. A numerical results substantiate the highly efficient mixing performance. It is highly the beneficial to fabrication process since only straight microchannel rather than complex geometry is enough to yield efficient mixing.

• Journal of Internet Computing and Services
• /
• v.9 no.3
• /
• pp.119-128
• /
• 2008

To use commercial software, most software users purchase the software. Some software users, who do not use the software frequently, regard purchasing the software as undue expense. Software rental service can be an effective substitute. To support the software rental service, charging scheme is necessary. Two categories of charging scheme can be considered. One is charging a fixed amount of fee for a fixed period of time and the other is charging a fee based on the actual usage time. In this paper, the software pay-per-use approach based on the amount of time that the software user has used is proposed. The proposed approach gives the capability to calculate the usage time.

• Imaging Science in Dentistry
• /
• v.42 no.1
• /
• pp.1-4
• /
• 2012

Purpose : Hand-held dental x-ray system is a self contained x-ray machine designed to perform intraoral radiography with one or two hands. The issue about its usage as general dental radiography is still in dispute. The aim of the present study was to assess the relationship between the amount of battery charge and the tube voltage in different handheld dental x-ray systems. Materials and Methods : Seven hand-held dental x-ray units were used for the study. Tube voltage was measured with Unfors ThinX RAD (Unfors Instruments AB, Billdal, Sweden) for 3 consecutive exposures at the different amount of battery charge of each unit. The average and the deviation percentage of measured kV from indicated kV of each unit were calculated. Results : Tube voltage of only 1 unit was 70 kV (indicated by manufacturer) and those of the others were 60 kV. Tube voltage deviation percentage from the indicated kV at the fully charged battery was from 2.5% to -5.5% and from -0.8% to -10.0% at the lowest charged battery. Conclusion : Tube voltages of all units decreased as the residual amount of the battery charge decreased. It is suggested that the performance test for hand-held x-ray system should be performed for the minimum residual charged battery as well as the full charged one. Persistent battery charging is suggested to maintain the proper tube voltage of the hand-held portable x-ray system.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.288-293
• /
• 2008

The cooling load in winter is significant in many commercial buildings and hotels because of the usage of office equipments and the high efficiency of wall insulation. The development of a multi-heat pump that can cover heating and cooling simultaneously for each indoor unit is required. In this study, the performance of a multi-heat pump with 3-piping system was investigated as a function of refrigerant charge and its performance was analyzed in cooling mode, heating mode, and heat recovery mode. COP in the heating or cooling mode showed little dependence on refrigerant charge at overcharge conditions, while those were strongly dependent on refrigerant charge at undercharge conditions and outdoor inlet temperature. In the heat recovery mode, the performance of the system was very sensitive to charge amount at all conditions. Optimum charge amount in the heat recovery mode was 14% lower than that in the cooling mode at the standard condition because the refrigerant only passed the indoor units. It is required to store the excessive refrigerant charge in a storage tank to optimize the system performance at operating modes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.7
• /
• pp.492-499
• /
• 2008

The cooling load in winter is significant in many commercial buildings and hotels because of the usage of office equipments and the high efficiency of wall insulation. The development of a multi-heat pump that can cover heating and cooling simultaneously for each indoor unit is required. In this study, the performance of a multi-heat pump with 3-piping system was investigated as a function of refrigerant charge and its performance was analyzed in cooling mode, heating mode, and heat recovery mode. COP in the heating or cooling mode showed little dependence on refrigerant charge at overcharge conditions, while those were strongly dependent on refrigerant charge at undercharge conditions and outdoor inlet temperature. In the heat recovery mode, the performance of the system was very sensitive to charge amount at all conditions. Optimum charge amount in the heat recovery mode was 14% lower than that in the cooling mode at the standard condition because the refrigerant only passed the indoor units. It is required to store the excessive refrigerant charge in a storage tank to optimize the system performance at operating modes.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.28 no.4
• /
• pp.415-436
• /
• 2017

The paper explores the formation of Makerspace in public libraries, based on a survey on space usage and programs being operated. The respondents targeted librarians in public libraries. The survey is divided into two categories: in space usage section, the questionnaire explores level of openness of the space used; availability of equipment rental services; frequencies of the space rented; cost of management; and the number of people in charge. In program section, the survey asks on types of program being operated; spaces used for the program; age groups of participants, time and budget spent for the programs. The survey resulted in highlighting difficulties in dealing with a lack of equipment, space, and people in charge. The paper therefore raises the need of guidelines for the area, cost, and the equipment needed, based on mid- and long-term consultation with expert groups.