• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.321-331
• /
• 2006

Recently, runoff characteristics of urban area are changing because of the increase of impervious area by rapidly increasing of population and industrialization, urbanization. It needs to extract the accurate topologic and hydrologic parameters of watershed in order to manage water resource efficiently. Thus, this study developed more precise input data and more improved parameter estimating procedures using GIS(Geographic Information System) and GA(Genetic Algorithm). For these purposes, XP-SWMM (EXPert-Storm Water Management Model) was used to simulate the urban runoff. The model was applied to An-Yang stream basin that is a typical Korean urban stream basin with several tributaries. The rules for parameter estimation were composed and applied based on quantity parameters that are investigated through the sensitivity analysis. GA algorithm is composed of these rules and facts. The conditions of urban flows are simulated using the rainfall-runoff data of the study area. The data of area, slope, width of each subcatchment and length, slope of each stream reach were acquired from topographic maps, and imperviousness rate, land use types, infiltration capacities of each subcatchment from land use maps, soil maps using GIS. Also we gave the management scheme of urbanization runoff using XP-SWMM. The parameters are estimated by GA from sensitivity analysis which is performed to analyze the runoff parameters.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.515-525
• /
• 2016

Parameter analysis of a pretension girder bridge for urban maglev transit was performed to identify the main design parameters and their effect. Girder deflection at mid-span is the most important design criteria of urban maglev transit. Therefore, concrete compressive strength, girder height, girder length, and unbonded tendon length were selected as the design parameters that relate to girder deflection. In addition, tendon layout and unbonded tendon ratios were also considered as design parameters to control the top stress of the pretension girder section at the support. The analysis results show that both the girder height and length are dominant design parameters governing girder deflection, more important than compressive strength and unbounded tendon length. And, sensitivity analysis makes this study suggest design weight value. In terms of stress, a tendon layout that can satisfy the unbounded tendon rule requires an additional tendon or rebar at the upper section to control the tensile stress on top of the section. Therefore, to improve feasibility and constructability in the future, an enhanced unbonded tendon rule considering the load characteristics of the urban maglev system should be studied.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.339-350
• /
• 2018

The rail wear measurements in urban underground railway have been analyzed to predict the particulate matter emission caused by rail wear which is one of the major sources of particulate matter emission for underground railway systems. From the rail profile variations measured in the interval of one and half year by dedicated rail wear measuring instrument over the commercial urban underground railway line, 'line-s' which is about 45km long, the characteristics as well as the amount of rail wear have been analyzed after dividing the whole line into about 170 section with radius of curve(R). It has been concluded that the vertical wear parameter V0 and corner wear parameter C0 have been selected to represent the wear amount of straight and curved rail respectively. The amount of rail wear as well as the particulate matter emission by rail wear over the whole line normalized by the rail length as well as the number of train has also been deduced from the relationship between the rail wear parameters and the amount of rail cross-section area.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1244-1247
• /
• 2002

The blending brake is mixed brake system which is operated by electrical and mechanical brake simultaneously. Most of urban transit system is used with blending brake unit. In order to train is align at the stopping position. The blending brake shall be presicely operated to the train. Many parameters are influence on the train when train is stopped on presicion position by blending brake. It is considered such parameters as decceleration, variable load, jerk, friction cofficient, etc. Therefore, This paper consider the parameter and describes the blending control for standard EMU. The control algorithm of it is proposed and simulation of it carried out by using MATLAB. Also Electronic control unit is manufactured with micro procesor which is configured fot blending control and is verified by performance test.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.1-6
• /
• 2012

Uniaxial and biaxial torsional fatigue tests were conducted on the samples extracted from urban railway wheel steel. Ultimate and yield strengths of the steel were 1027.7 MPa and 626 MPa, respectively. The uniaxial fatigue limit was 422.5 MPa, corresponding 67% of the ultimate tensile strength. The ratio of ${\tau}_e/{\sigma}_e$ was 0.63. Fatigue strength coefficient and exponent were 1319.5 MPa and 0.339, respectively. Maximum principal and equivalent strain were found to be adequate parameter to predict fatigue lifetime of the steel under multiaixal fatigue condition.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.621-629
• /
• 2011

Uniaxial and biaxial torsional fatigue tests were conducted on the samples extracted from urban railway wheel steel. Ultimate and yield strengths of the steel were 1027.7 MPa and 626 MPa, respectively. The uniaxial fatigue limit was 422.5 MPa, corresponding 67% of the ultimate tensile strength. The ratio of ${\tau}_e/{\sigma}_e$ was 0.63. Fatigue strength coefficient and exponent were 1319.5 MPa and 0.339, respectively. Maximum principal and equivalent strain were found to be adequate parameter to predict fatigue lifetime of the steel under multiaixal fatigue condition.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.42-47
• /
• 2017

In these days, the size of urban is growing and the function of city becomes complicated. And also, in city, people lives a lot. The life of urban is getting closer and linked with neighboring people in many parts. Especially, when peoples are exposing during using public transportation, even though does not be known, in they were living. Seoul is the most crowded place in Korea. In Seoul,The village buses have been serviced to the narrow streets. And people who use this bus, wants to seek the comfort of the ride, air quality and noise during in vehicle. In this paper, we determine the degree of annoyance with the noise inside the town bus in dB scale. And, such a situation was confirmed annoyance see their effect. The Interior noise did not see a big difference in the new car and the old car. Annoyance but also according to the skill of the bus driver remains the difference was confirmed.

• Structural Engineering and Mechanics
• /
• v.21 no.4
• /
• pp.375-392
• /
• 2005

Cable supported structures offer an elegant and economical solution for bridging over long spans with resultant low material content and ease of construction. In this paper, a model of shallow cable supported footbridge with reverse profiled pre-tensioned cables is treated and its load deformation characteristics under different quasi-static loads are investigated. Effects of important parameters such as cable sag and pre-tension are also studied. Numerical results performed on a 3D model show that structural stiffness of this bridge (model) depends not only on the cable sag and cross sectional areas of the cables, but also on the pre-tension in the reverse profiled cables. The tension in the top supporting cables can be adjusted to a high level by the pre-tension in the reverse profiled bottom cables, with the total horizontal force in the bridge structure remaining reasonably constant. It is also evident that pre-tensioned horizontally profiled cables can greatly increase the lateral horizontal stiffness and suppress the lateral horizontal deflection induced by eccentric vertical loads.

• International Journal of High-Rise Buildings
• /
• v.4 no.2
• /
• pp.109-116
• /
• 2015

The concept of vertical living has been hailed as a solution to control fast growth and urbanization of cities worldwide. As super tall residential projects become more common and sustainability considerations become more necessary, their efficiency has been called into question. How do vertical residential developments compare with suburban homes? What are the environmental advantages and disadvantages of vertical communities? Is there a middle ground? We present the results from an AS+GG study that compares the environmental performance of different housing typologies ranging from a 215 supertall building to single family residences, including several scales in between. Our samples comprise 2,000 residential units per type and include the infrastructure needed to support them. We analyzed land use, energy use, and lifecycle carbon emissions for each typology. The results show that different typologies perform better depending on the parameter being assessed. We discuss these findings; assess overall performance, and present conclusions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.11
• /
• pp.4483-4501
• /
• 2020

Recent findings identified the scatter and shape of MFD (macroscopic fundamental diagram) is heavily influenced by the spatial distribution of link density in a road network. This implies that the concept of MFD can be utilized to divide a heterogeneous road network with different degrees of congestion into multiple homogeneous subnetworks. Considering the actual traffic data is usually incomplete and inaccurate while most traffic partition algorithms rely on the completeness of the data, we proposed a three-step partitioned algorithm called Iso-MB (Isoperimetric algorithm - Merging - Boundary adjustment) permitting of incompletely input data in this paper. The proposed algorithm was implemented and verified in a simulated urban transportation network. The existence of well-defined MFD in each subnetwork was revealed and discussed and the selection of stop parameter in the isoperimetric algorithm was explained and dissected. The effectiveness of the approach to the missing input data was also demonstrated and elaborated.