• Journal of Korea Water Resources Association
• /
• v.51 no.10
• /
• pp.853-862
• /
• 2018

An adaptive cut-cell grid based 2D inundation analysis model, K-Flood, is developed in this study. Cut cell grid method divides a grid into a flow area and a non-flow area depending the characteristics of the flows. With adaptive mesh refinement technique cut cell method can represent complex flow area using relatively small number of cells. In recent years, the urban inundation modeling using high resolution and fine quality data is increasing to achieve more accurate flood analysis or flood forecasting. K-Flood has potential to simulate such complex urban inundation using efficient grid generation technique. A finite volume numerical scheme of second order accuracy for space and time was applied. For verification of K-Flood, 1) shockwave reflex simulation by circular cylinder, 2) urban flood experiment simulation, 3) Malpasset dam collapse simulation are performed and the results are compared with observed data and previous simulation results.

• Spatial Information Research
• /
• v.15 no.4
• /
• pp.397-406
• /
• 2007

2D hydraulic models of urban areas are at the forefront of current research of flood inundation mechanisms, but they are constrained by inadequate parameters of topography and insufficient data. In this paper a numerical model based on DEMs is presented to represent overflow waters due to bank break in urban areas. The surface flow in the building areas is assumed to be properly modeled by solving Saint-Venant equation. In order to represent flooding broken out in Samcheok city, 2002, hydraulic model test using tracer has been carried out and validated. These efforts will serve for making flood hazard map and for estimating economic loss due to inundation of personal properties in urban areas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.158-158
• /
• 2019

Recent studies show the possibility of more frequent extreme events as a result of the changing climate. These weather extremes, such as excessive rainfall, result to debris flow, river overflow and urban flooding, which post a substantial threat to the community. Therefore, an effective flood model is a crucial tool in flood disaster mitigation. In recent years, a number of flood models has been established; however, the major challenge in developing effective and accurate inundation models is the inconvenience of running multiple models for separate conditions. Among the solutions in recent researches is the development of the combined 1D-2D flood modeling. The coupled 1D-2D river flood modeling allows channel flows to be represented in 1D and the overbank flow to be modeled over two-dimension. To test the efficiency of this approach, this research aims to assess the capability of HEC-RAS model's implementation of the combined 1D-2D hydraulic simulation of river overflow inundation, and compare with the results of GERIS and FLUMENS 2D flood model. Results show similar output to the flood models that had used different methods. This proves the applicability of the HEC-RAS 1D-2D coupling method as a powerful tool in simulating accurate inundation for flood events.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.1026-1033
• /
• 2009

In this study, we computed the unit load of nonpoint source for the forest, agricultural, and urban representative region in Anseongchun watershed. In addition, Flow-weighted mean concentration (FWMC) that well represents runoff characteristics of storm water during rainfall, was calculated, and runoff pollutants loading was also examined. FWMCs of 1st rainfall, which runoff coefficient was high, had a tendency higher than those of 2nd rainfall. Based on landuse results, pollutant concentration of the non-urban such as forest and agricultural regions was higher than that of urban region. In case of BOD, runoff pollutants loading was calculated as 1,395, 1,623, 2,268kg/d in 1st rainfall for forest, agricultural, and urban regions, respectively, while runoff loading of 2nd rainfall was 503kg/d in forest), 512kg/d in agricultural, and 898kg/d in urban. By landuses, unit load of the urban as 72.7kg/ha/yr was 12 times higher than that of the agricultural as 6.5kg/ha/yr, and 8 times higher than that of the forest as 9.5kg/ha/yr.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.267-267
• /
• 2019

Driftwood is one of serious problems in a river environment. In several countries, such as Indonesia, Japan, and Italy, the driftwood frequently appears in a river basin, and it can alter the channel bed, flow configuration by wood deposition and jam formation. Therefore, the studies related to driftwood have been actively conducted by many researchers to understand the mechanism of driftwood dynamics. In particular, wood motion by collision is one of the difficult issues in the numerical simulation because the calculation for wood collision requires significantly expensive calculation time due to small time step. Thus, this study conducted the numerical simulation in consideration of the wood motion by water flow and wood collision to understand the wood dynamics in terms of computation. We used the 2D (two-dimensional) depth-averaged velocity model, Nays2DH, which is a Eulerian model to calculate the water flow on the generalized coordinate. A Lagrangian type driftwood model, which expresses the driftwood as connected sphere shape particles, was employed to Nays2DH. In addition, the present study considered root wad effect by using larger diameter for a particle at a head of driftwood. An anisotropic bed friction was considered for the sliding motion dependent on stemwise, streamwise and motion directions. We particularly considered changeable draft at each particle and projection area by an angle between stemwise and flow directions to precisely reproduce the wood motions. The simulation results were compared with experimental results to verify the model. As a result, the simulation results showed good agreement with experimental results. Through this study, it would be expected that this model is a useful tool to predict the driftwood effect in the river flow.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.2
• /
• pp.59-68
• /
• 2001

A water balance analysis was performed for a paddy field neighboring the Dongchang stream, downstream of the Unmun reservoir, which is constructed for the urban water supply. Daily rainfall data were collected and irrigation water flow rate, drainage flow rate, evaportranspiration, infiltration, and piezometeric head were measured in the field. The flow rates were continuously observed by water level logger during the growing season. The evaportranspiration and the infiltration were measured by N-type depletion meter and cylindrical infiltrometer, respectively. PVC pipes with 12mm diameter were used for piezometric head measurement. Total Irrigation and drainage flows were 3,608mm and 1,170mm in 1999, and 3,971mm and 1,548mm in 2000, respectively. The mean and range of the daily infiltration rate were 4.4mm/d and 3.4mm/d to 5.5mm/d in 1999 and 5.1mm/d and 4.1mm/d to 6.5mm/d in 2000, respectively. The net ground water flow including the change of soil water storage was 2,855mm in 1999 and 2,540mm in 2000. The evapotranspiration was 458.3mm in 1999 and 553.5mm in 2000. The range of daily evapotranspiration rate was from 1.6 to 8.7mm/d. The return flow ratio was about 32% in 1999 and 39% in 2000 and three year average was 35% including previous study in 1997. The amount of irrigation water was much higher than design standards or references in this study, This was caused by the inadequate water management practice in the area where water was oversupplied on farmers’ request rather than following sound water management principles.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.2
• /
• pp.93-101
• /
• 2021

Recently, with the urban redevelopment and the spread of the planned cities, there is increasing interest in the wind environment, which is related not only to design of buildings and landscaping but also to the comfortability of pedestrians. Numerical analysis for wind environment prediction is underway in many fields, such as dense areas of high-rise building or composition of the apartment complexes, a precisive 3D building model is essentially required in this process. Many studies conducted for wind environment analysis have typically used the method of creating a 3D model by utilizing the building layer included in the GIS (Geographic Information System) data. These data can easily and quickly observe the flow of atmosphere in a wide urban environment, but cannot be suitable for observing precisive flow of atmosphere, and in particular, the effect of a complicated structure of a single building on the flow of atmosphere cannot be calculated. Recently, drone photogrammetry has shown the advantage of being able to automatically perform building modeling based on a large number of images. In this study, we applied photogrammetry technology using a drone to evaluate the flow of atmosphere around two buildings located close to each other. Two 3D models were made into an automatic modeling technique and manual modeling technique. Auto-modeling technique is using an automatically generates a point cloud through photogrammetry and generating models through interpolation, and manual-modeling technique is a manually operated technique that individually generates 3D models based on point clouds. And then the flow of atmosphere for the two models was compared and analyzed. As a result, the wind environment of the two models showed a clear difference, and the model created by auto-modeling showed faster flow of atmosphere than the model created by manual modeling. Also in the case of the 3D mesh generated by auto-modeling showed the limitation of not proceeding an accurate analysis because the precise 3D shape was not reproduced in the closed area such as the porch of the building or the bridge between buildings.

• International Journal of High-Rise Buildings
• /
• v.5 no.2
• /
• pp.95-103
• /
• 2016

One of the key problems in the design of high-rise commercial complex is how to guide reasonable pedestrian distribution in commercial space. In this study, pedestrian distribution in three high-rise commercial complexes in Shanghai and Hong Kong was studied using spatial configuration analysis software Space Syntax and quantification of physical elements in commercial spaces, such as functional attractiveness, entrances, escalators, level variations and passage width. Additionally, in an attempt to integrate functions with spatial integration and spatial depth, two combination variables, the spatial coefficient of function (IF) and spatial depth coefficient of function (F/D), were proposed. The results of the correlation analysis and multiple regression analyses reflected the following: (1) Regarding the influence on pedestrian distribution, there was a synergistic and complementary relationship between function and space; (2) The comprehensive flow distribution analytic model could successfully interpret flow distribution in high-rise commercial complexes and its R Square ranged up to about 70% in the three cases; (3) The spatial coefficient of function (IF) and spatial depth coefficient (F/D) could effectively integrate functions and spatial configuration, which could help close the gap between over-emphasis on function in commercial research and the lack of consideration of function in space-syntax analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.203-208
• /
• 2011

Traffic demand is continuously increasing due to the development of urban areas in Korea. To cope with this, many efforts have been done including constructions of new roadways and increasing the number of lanes of the existing roadways. Those efforts, however, have been performed for only a short segment of target links having similar traffic characteristics. As a result, most urban cities experience bottle-neck phenomena which lead decreasing flow speed and increasing possibilities of accidents. Thus, this study aims to analyze problems of bottle-neck phenomena and effects of balancing number of lanes along the same corridor having similar traffic characteristics. For this, Route 32 passing the city of Daejeon in Korea has been selected as a case study, and a micro-simulation tool, VISSIM, has been adopted for the analysis. The results show that balanced number of lanes along the same corridor with similar traffic characteristics can increase flow speeds and enhance safety.

• Journal of Korea Water Resources Association
• /
• v.57 no.7
• /
• pp.451-460
• /
• 2024

It is necessary to apply a rational urban flood simulation method to analyze the causes of frequent urban flooding and to develop appropriate countermeasures. Previous studies in Korea have performed flood simulations by inputting the results of manhole overflow from sewer systems and river overflow into two-dimensional flood flow simulation models. It, however, is reasonable to simulate flooding from river and manhole overflows in a complex manner. In this study, we used the 1D-2D coupling functionality of the TUFLOW module, which is a part of XP-SWMM, to simulate the compound flooding of rivers and urban areas. That method was applied to the lower basin of the Naengcheon River in Pohang City, Gyeongsangbuk-do, where both inland flooding and river overflow coincided due to Typhoon Hinnamnor on September 5 and 6, 2022, to verify its applicability.