• 한국가스학회지
• /
• 제19권6호
• /
• pp.62-66
• /
• 2015

LNG선이나 해양플랜트 같은 설비나 구조물은 작동 조건을 고려할 때, 특히 부재마다 가지는 고유한 연성 취성천이온도(Ductile to Brittle Transition Temperature, DBTT)를 고려하여 설계되어야 한다. 본 연구에서는 해양플랜트 및 LNG선에 hull plate로 쓰이는 A-grade 연강(mild steel)에 대해 DBTT를 샤르피 V-노치(CVN) 실험을 통해 알아보았고 파괴형상을 통한 파괴거동을 살펴보았다. 그 결과 온도가 감소함에 따라 충격 흡수에너지는 감소함을 보였다. Upper shelf energy region과 lower shelf energy region이 나타나고 그 사이 구간의 천이점을 통해 DBTT가 결정되었다. 파괴형상에서는 upper shelf energy region에서 수많은 딤플이 연성파괴 형상으로 관찰되고 lower shelf energy region에서는 전형적인 취성파단형상이 관찰되었다. 이를 통해 BCC 구조를 가지는 A-grade 연강은 upper shelf energy 구역과 lower shelf energy구역을 보이고 그 사이 구간의 천이점에서 급격하게 온도가 떨어지는 DBTT구간을 뚜렷하게 보이는 특성을 알 수 있었다.

• 한국해양공학회지
• /
• 제1권2호
• /
• pp.101-112
• /
• 1987

Fracture toughness characterization in the transition region is examined for heat-treated and ionnitrided Ni-Cr-Mo steel. After heat treatment for the specimens of Ni-Cr-Mo steel, organizations of specimens-specimens which are heat-treated and ion-nitrided for 4 hours at 500 .deg. C and 5 torr in 25%N/dub 2/-75%H/sub 2/mixed gas-, hardness variety, and X-ray diffraction pattern of the ion-nitriding compound layer are observed. Fracture toughenss test of unloading compliance method were conducted over the regions from room trmperature to -70.deg. C. The compound layer was consisted of r'=Fe/sub 4/N phase and ion-nitrided layer's depth was 200mm from surface. The transition regions of heat-treated and ion-nitrided specimens were about -30.deg. C and -50.deg. C, respectively. The transition region of ion-nitrided specimens is estimated less than that of heat-treated one, and this is the effect of ion-nitriding.

• 대한금속재료학회지
• /
• 제46권12호
• /
• pp.788-799
• /
• 2008

This study is concerned with the effects of Mo, Cr, and V addition on tensile and Charpy impact properties of API X80 linepipe steels. Four kinds of steels were processed by varying Mo, Cr, and V additions, and their microstructures and tensile and Charpy impact properties were investigated. Since the addition of Mo and V promoted to form fine acicular ferrite and granular bainite, while prohibiting the coarsening of granular bainite, it increased the strength and upper shelf energy, and decreased the energy transition temperature. The Cr addition promoted the formation of coarse granular bainite and secondary phases such as martensite-austenite constituents, thereby leading to the increased effective grain size, energy transition temperature, and strength and to the decreased upper shelf energy. The steel containing 0.3wt.% Mo and 0.06wt.% V without Cr had the highest upper shelf energy and the lowest energy transition temperature because its microstructure was composed of fine acicular ferrite and granular bainite, together with a small amount of hard secondary phases, while its tensile properties maintained excellent.

• 대한금속재료학회지
• /
• 제48권7호
• /
• pp.615-624
• /
• 2010

This study is concerned with tensile and Charpy impact properties of high-strength bainitic steels fabricated by controlled rolling process. Six kinds of steels were fabricated by varying finish rolling temperature, start cooling temperature, and cooling rate, and their microstructures and tensile and Charpy impact properties were investigated. Their effective grain sizes were also characterized by the electron backscatter diffraction analysis. The microstructures of the steels rolled in the single phase region were most similar to those of the steels rolled in the two phase region. The steels cooled from $700{^{\circ}C}$ were composed mainly of granular bainites, while those cooled from $600{^{\circ}C}$ contained a number of bainitic ferrites, which resulted in the decrease in ductility and upper shelf energy in spite of the increase in strength. In the steels cooling from $600^{\circ}C$, fine acicular ferrites were well formed when the cooling rate was slow, which led to the best combination of high ductility, high upper shelf energy, and low energy transition temperature according to the decrease in the overall effective grain size due to the presence of acicular ferrites having smaller effective grain size.

• Journal of Mechanical Science and Technology
• /
• 제14권1호
• /
• pp.11-18
• /
• 2000

Fracture toughness JIC and KIC tests were performed on A516 Gr70 carbon steel plate at the temperature ranging from -$160^{\circ}C$ to $600^{\circ}C$, and test results were analyzed according to ASTM E 813 and ASTM E 399. Unloading compliance J-integral tests were performed on 1TCT specimens. The relation between the $J_{IC}$ value and the test temperature was obtained. It was concluded that the temperature ranging from $-15^{\circ}C$ to $600^{\circ}C$ is the upper shelf region of ductile-brittle transition temperature, and in this temperature range, fracture toughness $J_{IC}$ values decreased with increasing temperature. The ductile brittle transition temperature of the material may be around $-30^{\circ}C$. In the region near $-30^{\circ}C$, the tendency of $J_{IC}$ to decrease with decreasing temperature was significant.

• 한국수산과학회지
• /
• 제5권1호
• /
• pp.1-10
• /
• 1972

1. 여름(8월)에 북위 $29^{\circ}$ 동경 $127^{\circ}30'$ 근해의 동지나해 대륙붕 동측을 동복진하는 Kuroshio의 주류는 처음에는 연안 수괴와 반류역 수괴의 표층 경계를 폭좁게 통과하나, 동진함에 다라 범위가 넓어져 큐우슈우 남방의 Tokora 해협 부근에서는 폭이 약 2배로 넓어진다. 2. Kuroshio 강류역의 상층부의 표면 부근이 동지나해 연안수 확장이 있고, 상층부의 밑에는 반류역 표층수의 잠입을 볼 수 있고, 고 중간은 각 수괴가 복잡하게 혼합한 수괴로 되어 있다고 본다. 또, 그 해역의 동쪽에는 균일한 수괴를 형성한다고 볼 수 있다. 3. 이 해역에서 Kuroshio의 연직 혼합은 대략 표면에서 250m층간이다. 4. 아마미섬과 동지나해 대륙붕간의 수괴는 와동역과 반류역 Kuroshio 유역, 연안수의 잠입에 의한 Kuroshio 혼합역으로 구분된다. 5. 이 해역에서 얻어진 최대 유속은 139cm/sec이며, 단위 시간당 Kuroshio 수송량은 $24.6\;\times\;10^6m^3/sec$로서 남부의 오끼나와섬과 대륙붕 해역간의 $33\;\times\;10^6m^3/sec$ 보다 적다. 6. 표층 해류는 Tsushima 해협, 제주도 방면으로 향하는 것, 큐우슈우 연안으로 향하는 것, Tokora 해협을 거쳐 태평양으로 빠지는 것, 아마미 군도 및 오끼나와, 팔중산군도로 남향하는 것 등으로 구분된다. 그리고, 제주도와 Tsushima로 향하는 것은 유속이 극히 느려 0.3-0.5 놋트의 유동이었다. 7. 대륙붕 연변의 경사에서 저층 표류물은 Tsushima 난류에 향하여 수송된다. 그것은 대륙붕 위에서 저층 표류물이 황해 저층수로 유입되는 수송양식과는 다른 수송 기구를 이루고 있다고 볼 수 있다. 8, 여러 수괴가 혼합되어 있는 이 해역을 Kuroshio가 흐르는 동안, 대륙 연안수와 혼합이 심하여, Kuroshio는 그 성질 일부가 크게 변질한다.

• 한국재료학회지
• /
• 제23권9호
• /
• pp.525-530
• /
• 2013

This study investigated the continuous cooling transformation, microstructure, and mechanical properties of highstrength low-alloy steels containing B and Cu. Continuous cooling transformation diagrams under non-deformed and deformed conditions were constructed by means of dilatometry, metallographic methods, and hardness data. Based on the continuous cooling transformation behaviors, six kinds of steel specimens with different B and Cu contents were fabricated by a thermomechanical control process comprising controlled rolling and accelerated cooling. Then, tensile and Charpy impact tests were conducted to examine the correlation of the microstructure with mechanical properties. Deformation in the austenite region promoted the formation of quasi-polygonal ferrite and granular bainite with a significant increase in transformation start temperatures. The mechanical test results indicate that the B-added steel specimens had higher strength and lower upper-shelf energy than the B-free steel specimens without deterioration in low-temperature toughness because their microstructures were mostly composed of lower bainite and lath martensite with a small amount of degenerate upper bainite. On the other hand, the increase of Cu content from 0.5 wt.% to 1.5 wt.% noticeably increased yield and tensile strengths by 100 MPa without loss of ductility, which may be attributed to the enhanced solid solution hardening and precipitation hardening resulting from veryfine Cu precipitates formed during accelerated cooling.

• 소성∙가공
• /
• 제15권8호
• /
• pp.581-585
• /
• 2006

Effects of V on both the formation of Ti-Nb-V carbonitrides and mechanical properties of Ti-Nb bearing low carbon HSLA steels were investigated. Hot rolling process was simulated by using Gleeble 3500 system with the steels containing three different levels of V ($0{\sim}0.1wt.%$). Vanadium precipitated as Ti-Nb-V carbonitrides at austenite region but it did not precipitate as VC during austenite to acicular ferrite or bainitic ferrite phase transformation. As V content increased, the amount of Nb precipitates was decreased but the average size of Ti-Nb-V carbonitrides was increased due to larger diffusivity of V than that of Nb. Coarsened Ti-Nb-V carbonitrides could act as heterogeneous nucleation site during ${\gamma}{\rightarrow}{\alpha}$ phase transformation, thus, acicular ferrite transformation was promoted as V content increased, resulting in increase of upper shelf energy.

• 대한원격탐사학회지
• /
• 제34권6_2호
• /
• pp.1165-1178
• /
• 2018

남극 빙붕의 붕괴 및 흐름속도의 변화는 빙상에 대한 지지력을 약화시킬 수 있어 해수면 상승에 잠재적인 원인이 될 수 있다. 이 연구에서는 2016년 4월 대규모 붕괴가 발생한 동남극 난센 빙붕에 대해 Landsat-7 Enhanced Thematic Mapper Plus(ETM+) 및 Landsat-8 Operational Land Imager(OLI) 영상을 이용하여 2000년부터 2017년까지의 연간 흐름속도 변화를 분석하였다. 흐름속도 산출을 위해 Landsat의 청색, 녹색, 적색, 근적외선, 전정색 및 첫 번째 주성분 영상 등 총 6개 영상에 orientation correlation 기법을 적용하고, 각각의 변위 산출 결과를 융합하는 다중분광 영상정합 기법을 사용하였다. Landsat 다중분광 영상정합은 난센 빙붕에서 전정색 단일 밴드 영상정합을 사용하는 경우보다 최소 14% 더 넓은 영역에 대해 신뢰할 수 있는 흐름속도를 산출하였고, Global Positioning System(GPS)로 관측된 흐름속도와 비교한 결과 ${\pm}2.1m\;a^{-1}$의 매우 작은 오차를 가지는 것으로 분석되었다. 난센 빙붕에서 2000-2017년 사이에 가장 급격한 흐름속도 증가를 나타낸 곳은 Drygalski 빙하설과 인접한 영역이었으며, 빙붕의 중앙 유선을 따라 측정된 흐름속도는 빙붕 전면(ice front)에 rift가 발달하기 전인 2010년까지 거의 변화가 없었다(${\sim}228m\;a^{-1}$). Rift가 발달하기 시작한 2011-2012년에 rift 상류에서 흐름속도의 가속화가 관측되었으나(${\sim}255m\;a^{-1}$), 이는 2010년에 비해 약 11% 빨라진 것에 불과하였다. 난센 빙붕의 rift가 완전히 발달한 2014년부터 rift 상류의 흐름속도는 다소 감소한 상태(${\sim}225m\;a^{-1}$)로 안정화 되었다. 이는 rift의 발달 및 빙붕 전면의 붕괴가 난센 빙붕의 흐름속도에 거의 영향을 주지 않았음을 의미한다.

• 한국압력기기공학회 논문집
• /
• 제7권2호
• /
• pp.42-47
• /
• 2011

The purpose of this study is to investigate the effects of through thickness on the mechanical properties and microstructural features in Mod. 9Cr-1Mo steels for RPVs. The microstructures at all locations were typically tempered martensite, but small amount of delta ferrite was observed at the center region. The prior austenite grain size increased with the depth from the surface. The yield strengths of center and 1/4T location were higher than that of surface by 30MPa. The impact toughness of center was low compared to those of other specimens. Also, upper shelf energy was low at the center. The toughness deterioration in center might be caused by larger size of the prior austenite grains and existence of the delta ferrite.