• 한국작물학회지
• /
• 제44권4호
• /
• pp.355-363
• /
• 1999

The experiments were carried out to elucidate the varietal variation of retrogradation in aged cooked rice and its association with some physicochemical properties of milled rice. The fifteen rice materials were selected from forty-three low-amylose japonica and Tongil-type rice cultivars based on palatability and retrogradation of cooked rice stratified by preliminary sensory evaluation of warm and cooled cooked rice. One japonica glutinous rice variety was included for comparison of retrogradation of cooked rice. The $\alpha$-amylase-iodine method was adopted for checking the varietal difference in retrogradation of cooked rice. The desirable checking time for evaluating the varietal difference in deterioration of aged cooked rice was four hours after storing in room temperature and two hours after preserving in refrigerator based on the largest coefficients of variations in degree of retrogradation of cooked rice. The rice cultivars revealing the relatively slow retrogradation in aged cooked rice were Ilpumbyeo, Chucheongbyeo, Sasanishiki, Jinbubyeo and Koshihikari. A Tongil-type rice, Taebaegbyeo, and a japonica cultivar, Seomjinbyeo, showed the relatively fast deterioration of cooked rice. The retrogadation index represented by the percentage of retrogradation difference between warm and cooled cooked rice to original estimates of warm cooked rice was significantly affected by the degree of retrogradation of cooled cooked rice. Generally, the better rice cultivars in eating quality of cooked rice showed less retrogradation and much sponginess in cooled cooked rice. Also, the rice varieties exhibiting less retrogradation in cooled cooked rice revealed higher hot viscosity and lower cool viscosity of rice flour in amylogram. The sponginess of cooled cooked rice was closely associated with magnesium content and volume expansion of cooked rice. The hardness-changed ratio of cooked rice by cooling was negatively correlated with solids amount extracted during boiling and volume expansion of cooked rice. The major physicochemical properties of rice grain closely related to the palatability of cooked rice may be directly or indirectly associated with the retrogradation characteristics of cooked nce. The varietal difference in retrogradation of cooked rice can be effectively classified by scatter diagram on the plane of upper two principal components based on some retrogradation properties of cooked rice. The deteriorated structural change in cooled cooked rice by observing through the scanning electron microscope was more conspicuous in the fastly retrograded cooked rice than in the slower one.

• 한국치위생학회지
• /
• 제10권3호
• /
• pp.523-530
• /
• 2010

Objectives : In order to provide basic data necessary for developing oral health education plane for school continued oral health education by understanding knowledge and activities of oral health. Methods : This study was performed against 324 students at 5th grade of 2 elementary schools in Iksan-si, Jellabuk-do selected through convenience sampling, who were in mixed dentition period that might experience dental caries of permanent tooth. Results : As results, For the knowledge level on oral health by questions, it was found that the case that the elementary school students had correct knowledge on oral health was 'chocolates, snacks, and candies were foods that might often cause dental caries' and 95.8% of the students recognized it well. It was found that for 'must do toothbrushing before going to bed', 'during toothbrushing, I clean my tongue', and 'Proper time necessary for toothbrushing is about 3 minutes', 89.3%, 93.2%, and 89.3% of the students knew the, respectively. When oral health knowledge level by groups was divided into 3 groups and observed, they were classified into Low (0-4 points), Mid (5-7 points), and High (8-10 points). It was found that the knowledge level of each group was High 64.1%, Mid 33.9%, and Low 2.0% and it was identified that the high group took the largest ratio. It was suggested also for oral health knowledge level depending on their father's academic background that there was a statistically significant difference in the group higher than university graduate(p<.05). It was found for oral health knowledge level depending on parents' dental condition that an answer that both parents were good was high and there was a statistically significant difference. But post-analysis resulted that there was no apparent difference among groups. It was found that the ratio of respondents who answered for toothbrushing method 'toothbrush should be moved and rotated downward for the upper teeth and upward for the lower teeth to clean the teeth and gum' were 33.2% of male students and 29.4% of female students and showed statistically significant difference (p<0.05). It was found also that the ratio of respondents who answered to use a toothbrush for about 3 months' were 29.4% of male students and 25.5% of female students and showed statistically significant difference (p<0.05). Conclusions : Oral health program through the elementary school students and their parents for the development of proper oral health care education programs continue to be made should be considered.

• 대한의용생체공학회:의공학회지
• /
• 제28권3호
• /
• pp.397-409
• /
• 2007

Owing to needs of biomechanical comprehension and analysis to obtain various medical treatment designs which are related with the spine in order to cure and diagnose LBP patients, the FE modeling and nonlinear analysis of lumbosacrum including a partial ilium and iliolumbar ligaments, were carried out. First, we investigated whether the geometrical configuration of vertebrae displayed by DICOM slice files is regular and normal condition. After constructing spinal vertebrae including a partial ilium, a sacrum and five lumbars (from L1 to L5)with anatomical shape reconstructed using softwares such as image modeler and CAD modeler, we added iliolumbar ligaments, lumbar ligaments, discs and facet joints, etc.. And also, we assigned material property and discretized the model using proper finite element types, thus it was completely modeled through the above procedure. For the verification of each segment, average sagittal ROM, average coronal ROM and average transversal ROM under various loading conditions(${\pm}10Nm$), average vertical displacement under compression(400N), ALL(Anterior Longitudinal Ligament) and PLL(Posterior Longitudinal Ligament) force at L12 level, strains of seven ligaments on sagittal plane at L45 level and maximal strain of disc fibers according to various loading conditions at L45 level, etc., they were compared with experimental results. For the verification of multilevel-lumbosacrum spine including partial ilium and iliolumbar ligaments, the cases with and without iliolumbar ligaments were compared with ROM of experiment. The results were obtained from analysis of the verified FE model as follows: I) Iliolumbar ligaments played a stabilizing role as mainly posterior iliolumbar ligaments under flexion and as both posterior and anterior iliolumbar ligaments of one side under lateral bending. 2) The iliolumbar ligaments decreased total ROM of 1-8% in total model according to various motion conditions, which changed facet contact forces of L5S level by approximately 0.8-1.4 times and disc forces of L5S level by approximately 0.8-1.5 times more than casewithout ilioligaments, under various loading conditions. 3) The force of lower discs such as L45 and L5S was bigger than upper discs under flexion, left and right bending and left and right twisting, except extension. 4) It was predicted that strains of posterior ligaments among iliolumbar ligaments would produce the maximum 16% under flexion and the maximum 10% under twisting. 5) It's expected that this present model applies to the development and design of artificial disc, since it was comparatively in agreement with the experimental datum.

• Wind and Structures
• /
• 제11권4호
• /
• pp.275-289
• /
• 2008

Large eddy simulations have been performed within and over different types of urban building arrays. This paper adopted three dimensionless parameters, building frontal area density (${\lambda}_f$) the variation degree of building height (${\sigma}_h$), and the staggered degree of building range ($r_s$), to study the systematic influence of building spacing, height and layout on wind and turbulent characteristics. The following results have been achieved: (1) As ${\lambda}_f$ decrease from 0.25 to 0.18, the mean flow patterns transfer from "skimming" flow to "wake interference" flow, and as ${\lambda}_f$ decrease from 0.06 to 0.04, the mean flow patterns transfer from "wake interference" flow to "isolated roughness" flow. With increasing ${\lambda}_f$, wind velocity within arrays increases, and the vortexes in front of low buildings would break, even disappear, whereas the vortexes in front of tall buildings would strengthen and expand. Tall buildings have greater disturbance on wind than low buildings do. (2) All the wind velocity profiles and the upstream profile converge at the height of 2.5H approximately. The decay of wind velocity within the building canopy was in positive correlation with ${\lambda}_f$ and $r_s$. If the height of building arrays is variable, Macdonald's wind velocity model should be modified through introducing ${\sigma}_h$, because wind velocity decreases at the upper layers of the canopy and increases at the lower layers of the canopy. (3) The maximum of turbulence kinetic energy (TKE) always locates at 1.2 times as high as the buildings. TKE within the canopy decreases with increasing ${\lambda}_f$ and $r_s$ but the maximum of TKE are very close though ${\sigma}_h$ varies. (4) Wind velocity profile follows the logarithmic law approximately above the building canopy. The Zero-plane displacement $z_d$ heighten with increasing ${\lambda}_f$, whereas the maximum of and Roughness length $z_0$ occurs when ${\lambda}_f$ is about 0.14. $z_d$ and $z_0$ heighten linearly with ${\sigma}_h$ and $r_s$, If ${\sigma}_h$ is large enough, $z_d$ may become higher than the average height of buildings.

• Journal of Yeungnam Medical Science
• /
• 제10권1호
• /
• pp.37-47
• /
• 1993

인두편도 증식으로 인한 비호흡 장애가 치열 및 핵의 위치에 미치는 영향을 안모형태에 따라 비교 연구하기 위해 인두편도 증식으로 인두편도 절제술을 시행하기로 한 환자의 안모를 형태에 따라 mesofacial, brachyfacial, dolichofacial type으로 분류하여 각 type별로 20명의 환자를 설정하여 서로 비교 연구한 결과 1. 상악 구치부 치열궁 폭경에 있어서 안모 형태에 따른 유의한 차이를 보였으며, dolichofacial type의 안모를 가진 환자에서 가장 좁은 상악 구치부 치열궁 폭경을 보였다. 2. 혀의 수직적 위치에 있어서 안모형태에 따른 유의한 차이를 보였으며, dolichofacial type의 안모를 가진 환자에서 혀가 가장 하방에 위치함을 보였다.

• 한국항해항만학회지
• /
• 제30권6호
• /
• pp.439-446
• /
• 2006

선체는 기본적으로 판부재들의 조합으로 구성되어 있으며 상당수는 유공판(Perforated plate)으로 이루어져있다. 선체에 설치된 유공판으로서는 선체 상갑판 해치(하역시설로 사용), 선저부의 거더와 플로어(중량경감과 선박 건조 및 검사시 통로확보용), 다이어프램(중량경감 및 파이프 관통의 목적)등이 있다. 이들 유공판에 압축하중이 작용하면 좌굴과 극한강도 특성이 크게 변화할 뿐만 아니라 수반되는 면내응력도재 분포하게 되어 심각한 문제를 발생한다. 실적선에서는 유공주위에 스티프너 보강을 통하여 취약한 좌굴강도 보완하고 있으며, 유공을 고려한 실선에서 사용 중인 유공보강판 모델을 적용하여 좌굴강도 및 극한강도를 파악할 필요성이 있다. 이와 같은 측면에서 각 조선소에서는 각국 선급들이 제시하는 유공판의 좌굴설계식을 사용하여 강도계산을 하고 있으나 임의의 유공크기에 대한 좌굴강도 및 극한강도 평가법을 찾기란 매우 어려운 일이다. 본 연구에서는 실선에서 사용 중인 유공보강판의 모델을 조사하여 비선형 유한요소법(ANSYS)을 사용하여 면내 압축하중이 작용하는 경우에 대해서 유공비, 웹 치수, 두께 그리고 보강재 단면을 변화시켜가며, 극한강도 시리즈 해석을 수행하고 압축극한강도에 미치는 영향을 검토하였다.

• Journal of Oral Medicine and Pain
• /
• 제20권2호
• /
• pp.361-376
• /
• 1995

The purpose of this study was to investigate the relationship between the head and neck postre and the cervical curvature, especially in forward head postrue(FHP). Sixty patients with craniomandibular disorders and thirty dental students without any signs and symptoms of craniomandibular disordres participated in this study as patient groups and sa control group, respectively. The author evaluated the head and neck posture of all subjects by plumb line and CROM( Cervical Ragne of Motion), and had taken cephaograph in natural head position. On the cephalograph the angle of cervical inclination formed by true horizntal plane and 4th cervical vertebra(C4) and the radius of cervical curvature from C1 to C5 were measured. A specially designed ruler was used for measuring cervical curvature. Occlusal contac number and force with T-scan system, electromygraphic activity of cervical muscles with Bio-EMG, and distance of freeway space with Bio-ECN were recorded, respectively. The collected data were processed by SAS/STAT progrm. The obtained results were as follows : 1. In subjects with longer radius which was less cervical curvature, head positioned more anteriorly than subjects with smaller radius, and they showed slightly straight cervical vertebra. 2. Between the patients and the control group, there were no differences in cervical curvature, in forward head position by plumb line and in CROM. But the patient group had a greater cervical inclination than the control group had. 3. There were positive correlation between cervical curvature and forward head position by plumbline,between forward head position y plumb line and that by CROM in patient group. The cervical inclination, however, had negative correlation with cervical curvature, and with forward head postion by plumb line, respectively. 4. In case of showing more cervical curvature and more forward head position by plumb line the head position was defined as forward head posture. In patient group, subjects without forward head posture showed greater posterior teeth contact force than subjects with forward head posture, but in control group, there were no difference between the two subjects. 5. There were higher electromyographic activity in almost all muscles and smaller freeway space in induced forward head posture than those in natural head position in subjects without forward head posture. In conclusion, head position of patients with craniomandibular disorders were not more anterior than that of normal control person, but they had tendency to head extension. From the result of this study, forward head posture could be defined as posterior rotation of upper cervical segment with a straight lower cercial segment due to loss of normal lordosis.

• 대한구순구개열학회지
• /
• 제6권1호
• /
• pp.1-15
• /
• 2003

이차골 이식술을 시행 받은 구순 구개열을 가지는 성인 남자 20명의 두부계측방사선 사진을 McNamara씨 분석법을 중심으로 하여 계측한 결과는 다음과 같다. 구순 구개열 환자에서 Na. perpendicualr to point A칼은 글.98±5.70, SWh angle 값은 76.45±4.69, Pogonion to Na. perpendicular간은 -6.38± 6.73을 나타내었다. Effective maxillary length는 85.6±4.42, effective mandibular length 값은 123.88±7.10을 보였고 하악각은 29.9±5.09, facial axis angle은 5.53±2.03으로 관찰되었다. Point A에 대해 상악 전치의 돌출도는 3.95±2.74의 값을 보였다.

• 대한치과교정학회지
• /
• 제37권2호
• /
• pp.125-136
• /
• 2007

교정치료에 따른 연조직 변화 양상은 개개인의 차이가 심하므로 교정치료 중 흔히 재평가가 필요하다. 이를 위해서 고정식 교정장치가 부착되어 있는 상태의 입술의 위치와 교정치료 종료 후의 위치에 대한 비교 예측이 필요하다. 이 연구는 교정치료가 종료되어 고정식 교정장치를 제거하는 52명을 대상으로 T1(장치제거 전), T2(장치제거 직후), T3(장치제거 1.5개월 후)의 측모두부방사선사진상에서 입술과 그 주위 연조직을 분석한 결과 다음과 같은 결론을 얻었다. 장치제거 직후(T2-T1) 하순이 후퇴하며 장치제거 직후부터 1.5개월 후 (T3-T2)까지도 계속 후퇴하였다. 장치제거 1.5개월 후 (T3-T1), 기준선(G-perpendicular line)에 대한 입술의 평균 후퇴양은 상순(Ls)에서 0.38mm, 하순(Li)은 0.88 mm를 보였다. 주로 장치제거 직후(T2-T1)에 하순이 후퇴하는 여자군과 달리 남자군은 장치제거 직후부터 1.5개월 후(T3-T2)가지 하순이 주로 후퇴하는 양상을 보였으나, 장치제거 1.5개월 후 (T3-T1)에는 남자군과 여자군간의 뚜렷한 차이를 보이지 않았다.

• 건축역사연구
• /
• 제20권3호
• /
• pp.7-22
• /
• 2011

With the accumulations of outcomes from archaeological excavations of mountain fortress of three kingdoms period, there have been studies about time-periodic territory range of mountain fortress, difference in the way(method) of construction, defence system and so on from various points of view. This is an empirical study on the construction method of the valley part of stone fortress. First of all, it is required to secure large quantity of fresh water for those who lived at mountain fortress. Especially when builders of fortress construct a fortification at the valley part of stone fortress, in advance they must sufficiently consider several options including the establishment of sustainable water resources. First, when it comes to build a fortification on a ridge[or a slope] of a mountain, you have only to consider a vertical stress. However, when it comes to build a fortification at the valley part of a mountain, You must have more sufficient preparations for the constructing process. Because there are not only a vertical stress but also a horizontal pressure simultaneously. Second, a fortification of mountain fortress built by using unit building stone is a structure of masonry construction like brick construction, and the valley part of it is where the construction of the fortification begins. Third, when it comes to build a fortification at the valley part of a mountain, it seems that they use a temporary method such as coffer dam in oder to prevent the collapse of the fortification due to heavy rain. Furthermore, in response to a horizontal pressure a fortification is built by the way of its plane make an arch, or by piling up the soil with the plate method(類似版築) and earthen wall harder method(敷葉) they increase cross-sectional area of the fortification and its cutoff capacity. In front direction they put the reservoir facility for the fear that the hydraulic pressure and earth pressure are directly transmitted to the fortification. The process of constructing the fortification at the valley part of a mountain is done in the same oder as follows; leveling of ground(整地) ${\Rightarrow}$ construction of coffer dam ${\Rightarrow}$ construction of the fortification between the both banks of the valley ${\Rightarrow}$ construction of the fortification at bottom part of spill way(餘水路) between the both banks of the valley ${\Rightarrow}$ construction of spill way(餘水路) & reservoir facility ${\Rightarrow}$ construction of the fortification at upper part of spill way between the both banks of the valley. Coffer dam facility seems to be not only the protection device on occasion of flood but also an important criterion to measure the proper height of spill way or tailrace(放水路). This study has a meaningful significance in that it empirically examines the method of reduction of the horizontal pressure which the fortification at the valley part of a mountain takes, the date the construction was done, and wether the changes in climate such as heavy rainfall influence the process of construction.