• 한국운동역학회지
• /
• 제16권1호
• /
• pp.55-63
• /
• 2006

The purpose of this study is to prove the kinematical characteristics of Deff motion, the high bar performance, in terms of flying phases so that we can provide basic sources for improving gymnastic performance. To do this, we selected and analyzed the performance of two athletes who did Deff motion in the high bar competition of male artistic gymnastic in the 22nd Universiade 2003 Daegu. We drew the conclusions from the kinematical factors that were came out through analyzing three-dimensional cinematography of the athletes' movements, by using a high speed video camera. To make a successful performance, a performer releases the bar at a height of a high bar vertically and at a height of 82cm horizontally, and the flying performance should be made without moving forward, as maintaining the proper balance, in order to rise over 118cm high during the flying phase. When the performer is releasing the bar, an increase of the vertical speed in the center of the body and extension of a knee joint and a hip joint contribute to increasing a flying height. And when the moving body is twisted, leaning to left side is caused by the winding movement of a knee joint, which causes an unstable bar grasp. To grasp the bar stably, just before releasing the performer should gain propulsive force from twisting rotation through increasing the speed of shoulder rotation. And before the peak point, the performer should make sure of a body rotation distance over $164^{\circ}$ so that he or she can do an aerial rotary performance smoothly. When grasping the high bar, the center of the body should be above the bar and the angle of shoulder rotation should be maintained close to $540^{\circ}$ simultaneously. he high point performance(S1) has more speed on an ascending phase and less speed on a descending phase than the low point performance (S2). At the peak point, both the rotation angle of the body and that of the shoulder in high point performance are big as well. In conclusion, it is shown that a performer can make a jump toward the high bar easily with the body straight because the performer can hold the upper part of the body erect early in a descending phase.

• 복식
• /
• 제25권
• /
• pp.5-20
• /
• 1995

The fashion of late Yi dynasty had explored a possibility of new fashional beauty from its own experiences throughout the history of Korean fashion excluding any interference of foreign fashions, and brought out some characteristics ; first, the aesthetical value focused on the more human fashion resulted in the exposure of waist. This aesthetical change in the fashion of late Yi dynasty produced out results as follows ; the length and width of jacket became short and narrow maintaining the basic form, while the width of skirt became increased to be contrasted exceptionally with the upper coat. This mode of fashion reveals the transitional movement from the emphasis on balance to that on unbalance in the late period of Yi dynasty. But regarding the fact that the proportional change by the ways of putting on skirt became to be similar to the golden ratio, we can see many examples throughout the folk paintings by Shin Yun bok, we find that the fashional beauty of that age pursued ideal harmony and unity all the time being in spite of its tendency toward non-refinement. Second, we see another peculiarity in the mode of woman's fashion from the paintings by Shin Yun-bok who always depicted the hu-man nature frankly. For example, the jacket became shorter to emphasize lady's slim waist, and underwears began to be exposed after the upper part of skirt had been to expose lady's waist while the bottom line pulled up highter than before. Thus, as the function of robe had changed from a mere means of covering into an expression of beauty, the fashion of late Yi dynasty began to express a perfectly new beauty possessing an erotic mood and sensu-ality of a woman, which was its inner aesthetic need. Third, this emergence of new fashional beauty made the mental value of man and the aesthetic views of that time quite different from the previous ones, and finally there came various expressions of a new beauty. There-fore, the woman's fashion of late Yi dynasty is noted for the exposure and emphasis on the body line of a woman after the aesthetic view-point had changed of time toward pragmatism and humanism, while upholding the traditions of Korean clothes and pride for the nation. And our ancestors realized very Korean fashional beauty by pursuing the expressional ways of gentle, indirect emphasis upon the feminine and natural beauty to exclude and ar-tificial, direct and straightforward exposures and images.

• 복식
• /
• 제17권
• /
• pp.29-43
• /
• 1991

Yu was a type of dress worn on the upper part of the body which was commonly used in Northeast Asia. It was originally used by the Northern race for the need of courtesy as well as protecting cold. It was believed that Yu in Northeast Asia, which was called Kaftan, was came from Scythai lived in North Eurasian land around the Black sea. Scythians were the first-formed horse-riding race in the world and their civilization influenced those of far Asiatic sector along the steppe route. As their power expanded, their costume culture transmitted to the East(China, Korea, Japan). The upper garment, Yu, was characterized by the left-sided collars, narrow sleeves belted at the waist to the length of the hip line and the tight trouser on the lower part, which we commonly called HoBok(胡服) style. 1. Yu in Northeast Asia was originated from the Eurasians, Scythian Culture. Being exchanged, active style costumes were widely used among Chinese, Koreans and Japanese throughout centuries' including $4{\sim}8$ century. 2. Chinese Yu had a style of wide-sleeves and right-sided collars. The traditional costumes of Han race are consisted of wide-sleeved Yu on the upper and long-skirt on the lower part of the body. Before the adoptation of HoBok during reign of King Jo Mooryung in 307. B.C., HoBok style had already found in the remains since the Sang period. There were various names among Yu during the Han period. Seup, Sean Eui, Kye, Kyu were one of the styles and several names were meant for collar and sleeves. During $4{\sim}8$ centuries, clothes of right-sided collar were found, superior to that of left-sided and narrow sleeves were widely used both the royal and the humble. Various styles of decoration were seen in Yu around neck, back and sleeves comparing other nations. 3. Yu, in Korea, was typical style of Northern-bound HoBok. Both men and women had similarity in Yu style, narrow sleeves, left-sided collar, belted at the waist and to the length of hip line. Influenced by Han race, in the $4th{\sim}8th$ centuries, dual system of collar was found. But we cannot see major change in Yu and finally was connected to the present. 4. The original design of the Japanese costumes was not similar to that of Northern nomadic hunting race, which was suitable for horse-riding activities. Owing to the climates along the island, we could see various conditions ranging from the cold and to the warm. Influenced by the climates, pulling over the neck(Pancho style) were major design in Japan. As Korea was advanced earlier than Japan, Korean landed Japanese territory showing clothes. So primitive costumes had changes in style. During the $4th{\sim}8th$ period. The Korean mode was found in Haniwa (which was built to make sacrifices to the dead King) and costumes in Jeong Chang Won. Among the costumes in Jeong Chang Won, we put 3 or more costumes to the category of Yu characterizing elements of Korea and Tang period. From the $4th{\sim}8th$ century, China, Korea, Japan fell into the same cultural category, Scythai. Styles in Yu among three nations, we saw little differences, basically along times. Originated from the West Asia, Yu was transmitted to the far East changing Chinese costumes, Koreans melted it into the traditional elements and then influenced Japan.

• 한국생활과학회지
• /
• 제24권5호
• /
• pp.687-700
• /
• 2015

Lines of non-extension (LoNEs) on torso surface during arm abduction were investigated to provide appropriate location for inserting less-extensible yarns which can be used as seams for design and or clothing pressure variation. As experimental methods, reference points about 3 cm apart were marked on the skin and scanned at 30, $90^{\circ}$ and $135^{\circ}$ arm abduction. Skin deformation was measured by connecting reference points in horizontal, vertical and various angles of diagonal directions. Observation of skin deformation was made within the separated sections of the torso as well as integrated ones to cover the various occasions of design application. LoNEs of front and back torso were provided as mapping lines. Actual compression wear of three types was constructed with different pattern reduction rate at each separated section using LoNEs as boundary cutting lines. Clothing pressure and subjective evaluations of those three compression wear were evaluated by six subjects. LoNEs found in this study were useful as seam lines to differentiate clothing pressure at each part of the body, providing positive wear sensation. It is also expected that LoNEs can be paths for less strechable conductive yarns of IT-integrated upper garments.

• 한국재료학회지
• /
• 제22권6호
• /
• pp.292-297
• /
• 2012

In order to improve osseointegration of dental implants with bone we studied an implant with holes inside its body to deliver bioactive materials based on a proposed patent. Bioactive materials can be selectively applied through holes to a patient according to diagnosis and the integration progress. After the bioactive material is applied, bone can grow into the holes to increase implant bonding and also enhance surface integration. In order to improve the concept and study the effect of bioactive material injection on implant integration, design optimization and integration research were undertaken utilizing the finite element method. A 2-dimensional simulation study showed that when bone grew into the holes after the bioactive material was injected, stress vertically distributed in the upper part of the implant was relieved and mild stress appeared at the opening of the injection holes. This confirmed the effect of the bioactive material and the contribution of the injection holes, but the maximum stress increased ten-fold at the opening. In order to reduce the maximum stress, the size, location, and the number of holes were varied and the effects were studied. When bioactive materials formed an interface layer between the implant and the mandible and four holes were filled with cortical and cancellous bones all the stress concentrated opposite to the loading side without holes disappeared. The stresses at the four outlets of the holes was mildly elevated but the maximum stress value was ten-fold greater compared to the case without the bioactive material.

• 한국주조공학회지
• /
• 제30권4호
• /
• pp.130-136
• /
• 2010

Sulfide segregation behavior, characteristics of solidification microstructure and compositional distribution in the riser/castings junction of heavy-section main bearing support (MBS) steel castings were investigated; Sulfide streaks of A segregation were formed in the transitional region from columnar grain to coarse equiaxed grain and floated with aggregation of the dendritic free crystal. Solute segregation behaviors of elements Si, P and S were V shape negative segregation from the bottom of the castings to upper part of the riser with the reference of vertical center-line of the specimen block. Those of elements C and Mn were V shape negative segregation in the main body and A shape positive segregation in the riser of the casting. Just beneath the pipe shrinkage in the riser segregation ratio of each element was the highest, and that of S was 3.6 times higher, C 3.3 times, P 2.1 times, Si 1.6 times and Mn 1.0 times respectively. [Mn/S] ratio of the specimen block was distributed in the wide range of 20~275.

• 대한한방소아과학회지
• /
• 제22권1호
• /
• pp.149-162
• /
• 2008

Objectives The purpose of this study is to investigate that causes of motion sickness in oriental medicine. Methods The internal and external studies about motion sickness were searched Results and Conclusions The motion sickness is induced by conflict of balance system including vestibular, visual and proprioceptive system. The motion sickness is more common in female and in children between 2 and 12 years old. In western medicine, antihistamine and anticholinergic has been used for treatment of motion sickness, but these anti-motion sickness drug turn out to be not a perfect solution and have several side effects. On the other hands, In oriental medical terminology, there is no words equivalent to the "motion sickness", but we consider the motion sickness as state with dizziness, nausea and vomiting. The motion sickness can be induced by either internal or external causes and the internal causes can thought to be a constitutional factor of an individuals, and the general transportation can be an external cause. The important internal cause is a dysfunction of the spleen, stomch(脾胃不調), retention of phlegm and fluids(痰飮), and deficiency of the kidney jing(腎精不足). The wind(風) and fire(火) in the upper part of the body, especially in the head, also can be an important cause of the motion sickness.

• Journal of Preventive Medicine and Public Health
• /
• 제28권3호
• /
• pp.551-562
• /
• 1995

To assess the status of safety accidents, authors reviewed and analysed the records of safety accidents of a welding material manufacturing factory at Pohang city from January 1989 to December 1993. The results are; 1. The total incidence of safety accidents was 295 spells for five years. 2. Average age of workers with accident was 35.7 years. Average duration of employment was 6.2 years and the duration of employment increased as the year increased. 3. There was no statistical significance on season, month, weekday and time by year in the incidence of safety accidents. The most frequent part of body injured was upper extremities and the most frequent type of injury was abrasion. 4. Mean admission rate of safety accidents was 12.6% and the ratio of treated spells as occupational injury was 7.8%. 5. The most frequent cause of injury was worker's mistake and the most frequent action for the prevention of further accidents was safety education. 6. The incidence rate of safety accidents on 1993 was 116.2 spells per 1,000 persons. Above results suggest that to prevent safety accidents, safety education should be done continuously, the environmental and human factors were controlled and more exact reporting system of safety accidents was needed.

• 한국산림과학회지
• /
• 제96권4호
• /
• pp.414-418
• /
• 2007

북방수염하늘소의 산란흔은 잣나무의 산란가지 상부(햇빛을 바로 받는 부위)에서 $3.3{\pm}3.6$개, 하부(지면을 향하는 부위)에서 $16.3{\pm}13.9$개로 하부를 선호하여 산란하는 것으로 나타났다. 산란흔과 실제 부화 유충 수를 비교 한 결과 실험실 산란목의 산란흔은 $64.7{\pm}23.8$개였고, 유충 수는 $18.8{\pm}10.0$마리였다. 반면, 야외 산란목의 산란흔은 $63.6{\pm}31.1$개 였고, 유충 수는 $2.0{\pm}2.6$마리 였다. 잣나무 내수피와 목질부를 함께 공급한 유충들은 체중이 증가 하며 발육상태가 정상이었으나 목질부만 공급한 유충들의 경우 체중이 감소 하며 발육상태는 불량 하였다. 그러나 목질부만 급여한 유충들에게 잣나무 내수피를 함께 공급한 결과 몸무게와 발육상태가 회복 되는 것을 관찰 할 수 있었다. 지방체를 이용한 Esterase 활성 실험에서는 잣나무 내수피와 목질부를 함께 먹인 유충에서 Est1이 강한 활성을 나타냈다.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.147-154
• /
• 2005

A precision hi-directional actuator for a high precision leveling system with $Z{\Theta}_x{\Theta}_y$ motions is proposed and designed in this paper. The actuator is composed of a force generation structure, a guide mechanism, and a symmetric structure. At first, its driving force is generated by a change of flux in air gaps by permanent and changeable flux. The permanent flux is generated by a permanent magnet. The changeable flux is created by variable current flowing through coil. The combination of permanent and changeable flux makes various flux densities in air gaps between moving part and fixed yokes. And then, the difference between flux densities in lower and upper gaps creates forces fur the $bi-direction({\pm}z)$ motion. The guide mechanism of this actuator is composed of two circular plates and one shaft. Reducing motions generated by forces except z-motion, these circular plates endow the actuator with high stiffness for fast settling time. And the function of the shaft is to transfer motion to an object. At last, total body has a symmetric structure to be stable on thermal error. The actuator is designed by MAXWELL 2D and ProMECHANICA. The designed actuator is evaluated by 8nm laser doppler vibrometer, dynamic signal analyzer, and simple PID controller.