• 한국안전학회지
• /
• 제12권4호
• /
• pp.114-121
• /
• 1997

Helical anchors are foundation structure that designed to resist uplift loads are installed by applying in load to shaft while rotating it into the ground. These can be a cost effective means of proving tension anchorage for foundation where soil conditions permit their installation because of ease of installation. At present time, tapered helical anchors are commonly used to carry uplift loads. The uplift capacity includes the following factors : the height of overburden above the top helix, the resistant along a cylinder, the weight of the soil in the cylinder and suction force. In order to make clear behavior characteristics of helical anchors with pullout, model tests were conducted with respect to various embedment depth, space of helix, shape of helix. Based on the experimental study, the following conclusions are drawn. 1) The uplift capacity of multi helical anchors increase with embedment ratio of anchors The increase is smooth after critical uplift capacity. 2) Critical breakout factors and critical embedment ratio of multi helical anchor exist 7∼8, 4∼6 respectively. 3) Variation of uplift capacity with helix spaces show down after S/D=5. 4) Critical breakout factors of helical anchor in the laboratory test are similar to Das's theory.

• 한국농공학회논문집
• /
• 제60권4호
• /
• pp.105-111
• /
• 2018

Institutional inertia anti-disaster standard was presented mainly on the upper surface, it is necessary to improve to the soil type standard and uplift the resistance standard greenhouse that are vulnerable to strong winds. In this study, we carried out a field test using the load control method in order to evaluate the uplift resistance of continuous foundation of greenhouse with different depths of the rafters. Institutional inertia anti-disaster standard of greenhouse foundation did not protect the greenhouse structure from the damages caused by strong winds and heavy snow. Therefore, field tests for behavior characteristics of continuous greenhouse foundation were carried out to ensure stable facility cultivation. The field test condition was evaluated using different embedded depth as follows: 30cm, 40cm, 50cm and spacing 50cm, 60cm, 70 cm. As a result of the uplift resistance field tests using the load control method, the minimum uplift resistance was found to be over 90kg and uplift resistance displacement was 9.4mm. Uplift resistance of the continuous greenhouse foundation was in the range of 90-180 kg according to embedded depth and spacing. Using the test condition, there was no constant trend in the uplift resistance.

• 산업기술연구
• /
• 제21권B호
• /
• pp.195-203
• /
• 2001

The purpose of this study is to estimate ultimate uplift capacity of permanent anchor which was cast into weathered rock. The ultimate uplift capacity was estimated from the load-displacement curve of four different anchors which have different bond length. The creep test was performed for 15minutes under the maximum load of each step in order to understand the load-transfer property of permanent anchor and to decide which anchor to choose. The destruction range of soil due to the changes in load was estimated by installing dial gauge on the ground which was cast into the weathered rock. Ultimately, the study on the behavior of the anchor case into the weathered rock was performed by comparing and analyzing the estimated result of the UUC obtained by the full scale pull out test in the field with the exsting theoretical and practical results of soil and rock anchor.

• 한국지반공학회논문집
• /
• 제31권2호
• /
• pp.27-37
• /
• 2015

마이크로파일은 직경 300mm 이하의 소규모 말뚝기초형식으로, 기초구조물의 보강을 위해 널리 적용되고 있다. 본 연구에서는 일련의 인발재하시험을 통하여 그룹 마이크로파일의 설치조건에 대한 영향을 조사하였다. 본 연구를 위하여, 다양한 설치간격과 설치각도로 설치된 그룹 마이크로파일을 이용한 인발재하시험을 수행하였으며, 실험결과를 통해 인발지지력 증가특성과 인발변위 감소특성을 조사하였다. 인발저항력은 주로 마이크로파일의 설치각도에 영향을 받는 것으로 나타났으며, 인발저항력의 증가는 설치각도 15도, 30도, 45도에서 각각 33%, 59%, 5%가 증가되는 것으로 나타났다. 설치간격에 따른 인발변위의 감소량은 더 좁은 설치간격조건에서 크게 나타났으며, 동일한 설치간격조건에서의 설치각도에 따른 인발변위 저감율은 설치각도 15도, 30도, 45도에서 각각 50%, 53%, -45%가 되는 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.821-831
• /
• 2006

There are 5 railway bridges in a Seoul metro network; Jamsil, Dangsan(line 2), Dongho(line 3), Dongjak(line 4) and Chungdam(line 7). Because there are strong wind and vibration in the bridges, uplift of a contact wire caused by pantographs in the bridge section is higher than in a normal section. If the uplift at the support point exceed 10 cm, an interference between pantographs and catenary system happens. Estimated maximum uplift is obtained by applying safety factor 2 to the simulation results. The application of the safety factor is needed for taking into account of the effect of the wind, etc. Previously, we can not check whether or not the safety factor is proper. Recently, we can measure the uplift during the train operation, as a telemetry system which can measure dynamic behavior of the contact wire has been developed. The aim of this research is to review how proper the safety factor related to the uplift is, based on the measurement. We performed simulations and experiments for the uplift at the Jamsil railway bridge. The simulations were performed for the every kind of the train passing the Jamsil bridge. In order to compare the analysis results with the measurement results, we measured the uplifts at the support when the trains passed the measuring point. Finally, we proposed adequate safety factor with the uplift for the bridge section.

• 한국지반공학회논문집
• /
• 제33권1호
• /
• pp.67-77
• /
• 2017

본 연구에서는 단일 마이크로파일의 인발재하시험과 그룹 마이크로파일 인발재하시험 결과를 토대로 마이크로파일의 설치각도와 설치간격에 따른 인발지지특성을 확인하였다. 또한 FHWA(2005)의 방법과 Madhav(1987)의 방법을 토대로 지지력평가방법을 제안하고, 시험결과와 비교하여 그 적정성을 검토하였다. 시험결과, 단일 및 그룹마이크로파일의 인발지지력이 설치각도 30도까지 증가하는 것으로 나타났으며, 설치간격이 증가함에 따라 그 값이 다소 증가되는 것으로 나타났다. 제안된 FHWA(2005)의 방법의 경우, 수정된 방법을 통한 예측 값이 설치각도 15도의 5D조건까지 유사한 것으로 나타났다. 반면, 제안된 Madhav(1987)의 방법의 경우에는 모든 설치조건에서의 측정값과 수정된 방법을 통한 예측 값이 비교적 유사한 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.387-394
• /
• 2000

In the present study, laboratory pull-out tests with screw anchors are carried out to investigate behavior characteristics of underground structures applied uplift seepage forces. Small scaled pull-out tests in sand were conducted under saturated condition. And then, it was observed that the upward displacement as well as the pullout load varied with spacing of the anchor. Also, analyses have been performed with the aim of pointing out the effects of various parameters on the group effect of the screw anchors.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.886-890
• /
• 2013

Uplift of contact wire and dynamic characteristics between pantograph and contact wire are key interaction performance of OCS (Overhead Catenary System). These two evaluation items are the approval criteria for the performance between OCS and pantograph. A telemetry system or DAQ (Data Acquisition) System based on wireless communication make it monitor a dynamic behavior which is measured directly in a 25 kv like parts. While permissible working time is too short time to install is too long. In this paper, it is described that optimization the telemetry measurement system for OCS and increasing accuracy, easy adaptation, and faster handling can be also achieved through the study.

• 한국지반공학회논문집
• /
• 제27권12호
• /
• pp.27-37
• /
• 2011

강한 지진 발생 시 뒤채움내의 과잉간극수압의 증가에 의해 지반이 액상화 되었을 때, 주변의 액상화 지반보다 작은 단위중량을 가진 지중 매설구조물은 부상하는 현상이 발생한다. 뒤채움에서의 과잉간극수압의 증가와 지중 매설 구조물 부상량의 관계를 설명하기 위해 동적 원심모형 실험을 수행되었다. 본 연구에서는, 매설구조물의 부상현상에 영향을 미치는 요인으로써 직접요인과 간접요인이 실험에 고려되었다. 이러한 요인들 중에, 과잉간극수압비의 증가에 영향을 주는 중요한 요인은 직접요인으로써의 지하수위, 뒤채움의 상대밀도, 그리고 입력 지진가속도의 크기이다. 그리고 이 요인들은 지중 매설구조물의 부상량에도 크게 영향을 주는 것으로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.639-646
• /
• 2006

A nonlinear finite element analysis is carried out to predict the ultimate internal pressure and failure mechanism of a 1/4 scale prestressed concrete containment vessel(PCCV) model using the commercial code ABAQUS. Therefore, this paper is mainly focused to compare the influence of concrete material model, tension stiffening parameter, uplift phenomenon and basemat. From the analysis results, nonlinear behavior of the PCCV showed a substantially different aspects in accordance with the nonlinear material model for the concrete as well as tension stiffening parameter. The boundary conditions beneath the basemat are considered to be a fixed condition and a nonlinear spring element to compare the influence of the uplift. The finite element analysis is considered with and without a basemat to find out the influence of the basemant itself. From the analysis results, the nonlinear behavior of the PCCV is entirely similar for the two cases.